Search results for query: *

Complete set of components. Exhaust and intake manifold, carb, new remfex gasket set, new Lokar kickdown linkage, all of the correct manifold hardware, air cleaner assembly with correct decal. I've decided to just keep my single barrel as is. I've been assembling these pieces and cleaning them...

I had a few vinyl decals made for me by a local shop. Very reasonable and I love the look. I'm sure it's "correct" for the vehicle, but I think it dresses the vehicle nicely. Funny. I was it traffic a week ago and a guy pulled up next to me and said he's never seen anyone advertise that they...

I have a 1974 Duster with 10 inch drums up front. This spindle drum setup requires a 3 mm offset on the wheel. I have new wheels and they fit fine. However, now I want to convert to disc brakes. I am leaning toward the Magnum Force kit. Bottom line: will this offset wheel work with the discs???

I have a 1974 Duster with a small bolt pattern (5 on 4") in a slant six car. The 10 inch drums up front do stop the car, but I think I want to invest in disc brakes for the front. I want to retain the lug bolt pattern and my wheels are cragar ss 15 inch front and back. I realize that parts...

I thought I'd seen somewhere here that the 1963 dart is rare and valuable. Is this true? I've found one and it's priced right and in fair shape. Just curious to see if this is plain Jane or more desirable version. Thanks.

I like the blacked out hood on Dusters, so I decided to paint mine. Never painted before. I went to a local paint shop and told them I wanted Satin black. This is what turned out. I was hoping for more of a flatter sheen. This is a single stage paint. Could I carefully use sandpaper on...

Time to start the conversion from /6 to V8. I've been searching the web for a very reputable engine supplier or builder--a bit overwhelming. I don't need a racing engine, just one that will give me a good thrill when I hit the accelerator. I would appreciate any advice on good engine...

I've got a lead on a 1985 D150 with a slant six engine for cheap. I want to super six my 74 Duster. Was the super six available in this truck/year? I don't want to waste time looking at it if it doesn't or won't work.

Found this on CL (http://jacksonville.craigslist.org/pts/3153715015.html) Seems like an excellent deal. Is this an oddball engine or something? Is this a good deal? Don't know this engine, but want to put a V8 in my A-body.

I’ve been buying cars and “restoring” them for years. The term restoration can be argued about too—that’s for another day. I enjoy working on cars and making them look new again. I gather most on this board have the same addiction. Luckily, my wife supports this passion (but she says she...

The bezels around my rear tailights are flaking. I found them at Dante's for $375/pr. They appear to be aluminum. Could these be media blasted or sanded and then painted black? I thing that would look better--and be less expensive.

I have a 1974 Duster with slant 6, A904 tranny and 7.25 inch rear end. The car runs great and looks great. However, stomping on the accelerator just isn't much fun. So, as a rookie to Mopar, if you had $5000 to add a V8 to this car, how and what should I do? I realize that the tranny and...

I am looking for floor mats that would fit my 1974 Duster. I've seen some on Elay for 1970-1973 Duster, but the ads indicate that they won't fit the 1974. Did the cars change that much from 1973 to 1974? Anyway, I want a carpeted mat with either Plymouth or Duster logo that fits the car properly.

Anybody know where to get the "knob" for the seats? This is a 74 Duster. These things are sharp! Supposed to look like the second pic.

Installed a reman carb and the 74 Duster runs good again. However, on first start up, it revs real high until I kick the throttle, then it comes back down to idle. How do I adjust the fast idle setting?

I am interested in a pair of hood scoops for my 1974 Duster. From what I can ascertain with the search feature, the 70-72 hood is different from the 73-76 hood. Is this correct? I only see hood scoops available for the 1970-72 hood (like at Dales Cuda shop). Anyone make scoops for the 1974...

1974 Duster, /6 with AC. Could someone tell me where this last port (left) on the charcoal cannister goes? It says Carb Bowl. I have a Holley 1945 carb and there's no position left on it to hook anything to.

I purchased the service manual for my 1974 Duster. However, the manual refers to vehicle designations V-L, B-J, R-W, P-D, and C-Y. I can't locate a legend or key to permit me to figure out which one of these my Duster belongs. Any help pointing out my inability to read the manual would be...

1974 Duster with factor AC. I pulled all the components on engine side of the firewall. Can I simply cap the old pressure lines at the fire wall and run my heater core as it was originally hooked up? Or, should I pull the AC box on the inside too? I just don't want that big POS AC unit on...

My 1974 Duster sags a little in the rear compared with the front. I like the lower look and want to match the front to the rear. I read using the search feature that I can lower the front by simply "loosening" the torsion bar. Is the nut shown in the picture the torsion bar? If I lower the...

The family car door guard is hurting my muscle car image. Can this be taken off without destroying the paint? I was able to peel a little off and it looks lie the color is the same beneath. I thought about using a hair dryer to heat the glue holding it on to get it more easily. Anyone done...

Could someone identify this part for me. It leaked something VERY sticky. It's from a 1974 Duster/225 with AC.

Can someone identify this carb on my 1974 Duster? It's leaking pretty bad and I thought I'd replace it. Also, any good place to buy a rebuilt one? I saw them fairly cheap at Rock auto but wasn't sure which one to choose. Thanks.

Looking for a complete antenna in good to excellent condition. PM me please.

I've looked with the search feature and only got more confused. Please help. I have a stock Duster (1974), automatic, slant six, with a 7.25 inch rear end. It currently has 14 inch stock wheels on it. I want to get bigger tires and Cragar SS supersport mags. With my configuration, what is...

Cleaning up my newly acquired 1974 Duster. I pulled the glove box and while cleaning the crap out from behind it ran into a Ketchup packet from 1978! Mmmmm. Tasty.

Thought I'd start my own place to document my progress. Paint and body are acceptable to me already. So, I started with the interior. Ordered carpet and sent the seats for reupholstering. Not any rust under the seats. I think I did good. I'm going with black vinyl seats. Owner cut the...

I'm just starting out here--my first Mopar. A 1974 Duster with 225. I've been perusing the Google to find a set of shop manuals. I'm old school and want paper copies. Any recommendations for a source? Don't really want the Haynes or like--prefer the actually Chrysler shop manuals.

I'd been looking for a Mopar for 6 months. Finally found one 3 miles from home! Original owner, 49,000 miles, 225 slant 6, covered it's entire lifetime. Not a single bit of rust! Owner's husband was a paint and body man--repainted it once--a while ago. Even the spare was original and the...

I am learning on the fly here. I'm interested in an A-body Dodge and have been looking for one in my price range--around $5K. I found a 1967 Barracuda close to me on CL--Here is the link http://gainesville.craigslist.org/cto/3053671462.html I hope it's okay to post this here. Anyway, is this...