Search results for query: *

So I pushed out a head gasket and am looking into some aluminum heads to replace the Rhys/Indy lax heads I have on it now. I’m going to put cometic mls head gaskets back on and am looking at the speed masters on jegs sight that say in stock. I’m looking at these ones PCE281.2148 because it says...

So I just came across a old video where they put some trickflow 190 heads on a small block 410 stroker. I looked around on the web and it seems these heads are sold out everywhere I looked. So here’s the question and I know it goes along with how fast u wanna go,do u race and all that. But I...

has anyone got a cowl hood on their 67-69 dart? I typed cowl hoods in on google and a picture of a silver 69 with a cowl hood popped up that said the pic is from forabodys. I have a 6-71 on my 68 dart and would like to put a cowl hood on it that would still show the carburetors and maybe top of...

So I haven’t been on here in awhile, but just came across a weird episode with my 68 dart. So my hi flow water pump swallowed the coil wire in the lower radiator hose wrapped it up and broke the seal so it stared leaking through the weep hole on the bottom of the pump. Replaced it with another...

So I had my car in the shop today to get it tuned by people who do it for a living. When I took it in i told them right off it’s not a race car and I’m not hunting for max hp I just would like it to be dialed in and running great when I get it back. So it runs sweet and I don’t plan on taking it...

Do you think 10.5 power seem like to much. The carbs both came with 10.5 power valves in them. Vac at idle cut in half is supposed to give you power valve size right. But what about if your running 2 carbs is that cut in half again? I just fouled my first set of plugs. Power valves don't come in...

i have 2 750dp Holley part#80573s an they have the duel 50cc accelerator pumps. My question is are these pumps to big? The racier 750dp part#80576s has 30cc pumps and that’s got me to thinking. Should I be starting with smaller pumps. Ive been driving it around town an it’s crazy but may be a...

Anyone going to hot rods and hogs at thunder mountain in Loveland co?

So I noticed with two carburetors side by side one of the chokes touches the throttle of the other carburetor when I put them on. They are 4150 style 750dp carbs with manual chokes. I’m trying to find some info on weather both chokes are removed or just one choke. And if one choke is left on is...

Ordered another 750dp carb from summit racing. It came with a broken rear squirter arm. Looks like someone tried to glue the broken bolt back to were it snapped off the carb? They didn’t even try to take the old broken bolt out. This is the second time they’ve sent a carb that had something...

If anyone is interested I have it for sale on craigslist for now FT Collins autoparts. U can see pics of it on my garage. Mopar sb supercharger

Called dyers blower service this morning, asked about the 6-71 kit price for a sb mopar polished set up. He said 4,100 bucks everything but the carbs, linkage, and fuel lines. I'm fixin to pull the trigger in January on one. Said they have no problems with dist clearance either on there kits. I...

So I have a 8.25 with 3.55 gears not a sure grip. I know this is a for sale post but this is free to who ever wants to pick it up. It's been narrowed for a mini tube on a 68 dart. I originally had 8 inch weld wheels on it with 15x8 275 on it 4 inch back space. Then I had 15x12 draglite with...

So summers almost here again. And I'm kicking around the idea of putting a 671 on my car an selling my b&m 162? At least that's what I think it is. Anyone know the estimated price of adding one of these 671 blowers. I realize I'll have to get 2 new carbs an some missalaniouse stuff. I'm thinking...

i have the McLead clutch with diaphragm pressure plate in my 68 dart right now. I didn't think it would last, I believe it's the first level clutch they sell. Anyhow I think it's time for a new one. I took it out for a drive an at a stop light I heard, what sounded like a loose piece of metal...

So I follow roadkill an hot rod garage. I just watched the last episode upgrading there fury station wagons brakes an top end of a 500cu something or rather stroker. An they were hoping to make 500 hp with this. After having this thing tuned on a dyno they got it in the low 400 ish power range...

So I bought this snow water/methenal kit awhile back, an am just getting around to messing with it. So what I thought a guy could do when I first bought this kit. Was a guy could go get some washer fluid with the lowest freezing point an get a decent amount of methanol in the jug. But after a...

Second time out thought I had it but lost first gear tried to grind when I went to stick it in first at a stop. Installed it with the plastic line up pin but some where along the line it wasn't right. Is there a trick to this? I remember messing with my linkage forever when I first installed...

Has anyone installed one of these in your body? There's a couple places on the web that say they can be used with a body mopar original a body 4 speed. I'm assuming they mean the one with the shifter mount on the end of the tail shaft? If you have one, what do you think? Worth it? I have a...

So I've had several guys call me about buying a air gap intake but it seems they think it will hit the hood of there car? All three guys where owners of 67-69 barracudas. I had it on my 68 dart with no problems but I can't tell them with a 100 percent certanty it will clear there hood. Am I...

So I went ahead an cut down the Dana I got this winter welded the ends on an ordered the parts I needed from docdiff. But beings how this is my first time doing this I have a couple of questions an I can't find many pictures on the net to help me out. So here it goes, the axles already have...

680 ss quick fuel tried three different carbs when I first built my engine this was the last one I had on it before switching to a mini blower an a 750 dp. This carb was tuned by a local shop for me as I had trouble tuning it? It's a electric choke. Very low miles on it, I ran it for just a...

Air gap Eddie I ran it for one summer before replacing it with a mini blower I am asking 225. Eddie performer I ran it when I first was tuning the car asking 150. Local pick up only. Loveland co.

Draglite 15x8 4 1/2 back space with bf Goodrich radials ta 275/60/15 tires great shape. 400 for the pair tires rims an center caps. Local pick up only. Loveland co.

I've been looking at this site for a rear axle, has anyone here delt with this place? I got a Dana 60 I was going to work on this winter but after coming across this site I'm thinking I am going to just order one from them an be done with it. Any reviews. Thanks...

I'm planning on a rear end swap this winter an was wondering if a 4 link was worth doing. I've read the old hemi darts were running in the 10's some where with ss springs. I dont need to run 10s but I had a fella ask me if I planned on a 4 link when I swapped out my old rear end. He seemed to...

So it's done this as long as I've driven it, just wondering what the deal is I haven't found it yet. While driving around no problems at all but say if I am behind someone who stops short or the light turns red an I have to stop suddenly, I have to try an peddle it to keep it from dying not bad...

Would anyone here know if the weiand 6 groove 2.66 pulleys sold through jegs and summit, work with b&m mini super chargers? I thought I read somewhere Holley owns weiand an bought the b&m brand as well? I pulled my upper pulley off to get measurements, jegs couldn't answer if there pulley they...

Just started looking into these, I have a 68 dart without sway bars front or back. Did any of these cars ever come with them? How about a aftermarket line? If anyone here has installed these on a 68 dart did they give a noticeable difference? If there's a aftermarket dealer is this a worthwhile...

Car show this weekend sat may 16 thunder mountain Harley Loveland co 9am to 4pm. Anyone going.