Search results for query: *

MR GASKET VERTIGATE SHIFTER 4 FOUR SPEED A BODY I have a Vertigate shifter that i bought years ago and never used or mounted it it is for A body and has surface rust on the black parts from sitting in my garage for years box rotted away has light scratches on chrome and very small chip in...

Looking for left rear tail light bezel that still has chrome on it and no broken studs can have some pitting i no there 50 years old or older. send picture . Thank for looking . 74 DUSTER

HERE are some parts i had removed from a 75 duster . if they don't sell there going to the scrap yard . see if there is some thing you can use. oil pan $ 15.00 plus shipping oil pump pick up $5.00 plus shipping...

Installed 1970 duster front bumper and brackets 0n my 1975 duster went on with only one mod so far removed bumper shocks and put two 1/2 with 3/4 head bolts that came off the car cut the press on washers that were cracked and replace them with thick cat washers that i made flat on top and...

1973 to 76 drivers side tail light bezel chrome must be fairly good and shine. For Plymouth duster

Does anyone no if a F body auto floor shift and console fit in a 73 to 75 duster?

I have two New right hand threads tie rod ends with no grease fittings $ 10.00 for both plus $7.50 shipping. I have two right hand thread tie rod ends one is NEW moog ES401r The other one was installed on a car i bought that sat for 10 years when i got it it was not painted so it was...

I have two New right hand threads tie rod ends with no grease fittings $ 10.00 for both plus $7.50 shipping. I have two right hand thread tie rod ends one is NEW moog ES401r The other one was installed on a car i bought that sat for 10 years when i got it it was not painted so it was...

LOOKING FOR A FIBERGLASS FRONT BUMPER FOR 1973 TO 76 DUSTER .

I have not seen it in years so i sent a email to the track and got back a short answer that said we no longer holed it . I read in to that as something happen for them to just stop it the last one i went to was 2015 . Does anyone know what happened

I Have a Milodon 8 qt street street oil pan with pick up tube #30940. previous owner put a rod through the left rear and patch it . Bought it from him and had to buy a new pick up tube i use this pan for two years with no leaks when i removed it i cleaned it and touched up the out side...

Have a barracuda 120 MPH speedo head with the adjustable odometer i bought it to put in my car when i sent mine out for service then saw the it was screw on cable type so i just took a bushing and c clip off the odometer shaft to fix mine. good head works and if you have a bad one the part...

I have one rocker shaft right side I think 7 rockers and spacers FOR ALL SMALL BLOCK LA Shaft very little wear same on rockers spaces must be made of soft metal were rusted blasted them still use able only space the rockers . These were sitting in my basement since 1995 would run a brush in...

I have a set of 3/8 stem cut to fit 0.531 outter guide and out side of seal is .620 they are for small block or big block mopar the set is missing one seal you can get one from crane or you can get one from comp cams #505-1 $20.00 free shipping from Maryland 21783

looking for duster 1973 to 76 if used they must be not hard or cracked and if new must not be asking retail price . Thanks please pm me . WILL be asking for picutre if interested i have new white clips so if yours are broken its ok

The MT ET street ss Radial always worked great for me but now they are getting costly at over $600 a set were the Nittos are $419 a set for 275 x 60-15'' The last set of et i bough were be for covid and i payed $380. a set. No longer working so have watch what i spend but if the ET are...

I have two sand blasted and painted Shock plates for a 7 1/4 rear axle OFF 74 Plymouth duster . Don't want a lot for them make me a offer . Shipping $12.00 i am in Maryland 21783 I also have a lower control arm right side 1974 same thing blasted repainted and new bushing $ 40.00 PLUS...

Looking for 1 weld drag lite 90 wheel 15x 3.5 by 5x4.5 bolt . thanks for looking

I got a ED Hamburger oil pan and pick up for my engine and it had the Milodon 19050 high volume oil pump kit for small block the direct connection # was p3690852 this is a old nostalgia from back in the day . Took it apart the pump was in good shape body and cover had no wear the rotors had...

Mopar 833 4 speed transmission was rebuild 2 year a go has 200 miles no noise has light pitting on 3 gear from sitting before i got it, no gear noise . some wear on 4 gear synchro teeth but does not pop out of gear is a 1969 a body date code is feb 17/ 1969 fits 67 up 76 a body cars out put is...

2014 Dart AERO 1.4 turbo manual 6 speed trans ps , pb ac, power windows , power locks , auto head lights , touch screen , blue tooth, factory cd player U connect phone cruise control 125,000 miles bought it new has been a good car . 28 mile city 38 hwy . highway miles so car has a lot...

should i put a rear sway bar on my 75 duster with leaf springs caltrc 727 no trans brake 3700 stall and 10'' slicks small block. yes or no ?

NEED A USED TAIL LIGHT PANEL FOR 1973 TO 76 DUSTER AND SOME ONE WILLING TO SHIP IT .

1970 Plymouth Duster 340 4 speed bucket seats 8 3/4 rear 3.55 gears This car was restored in 2013 the only metal parts that were replace was right rear lower qt panel and extensions. spare tire well all other metal is original . New seat cover and foam , carpet, head liner rebuilt .020 over 340...

looking for shift rod lever fare prices # 8006 or 98006 8001 or 98001 and a rod #96830 you can pm me . thanks

Not good with mopar date codes , what year and month or day is this pp8332761 02 80

Never been good with Mopar date codes what year and month is this pp8332761 02 80

MOPAR 360 non roller block with main caps has been sleeved to 4.060 bore for stroker kit will need to be bored to 4.070 0r bigger if you want. Block was decked just need to clean gasket surface . can be used also as a big bore kit with stock crankshaft and rods ,. . got this in a parts deal and...

Good Used set of Speed Pro l2316-f 30 pistons 10.5 compression .The top were clean with walnut shells and cleaned in parts washer then re coated the skirts with molly coat . The pistons are in good shape the top of the piston have light pit marks from my friend running his engine to lean at...

WANT a Edlebrock 650 avs carburetor it can need rebuilding or not want to spend up to $175.00 plus shipping. only want edlebrock avs