Search results for query: *

Very nice, like new Edelbrock Torker 383 Intake for sale. I bought it for my wife's big block build but we ended up going with a trick flow intake. Will work with any low deck big block mopar. Located in Nashville, TN 37218. Asking $325 shipped to any of the lower 48 states.

I am selling a good running 383/727 that was just pulled out of my wife’s 68 Chrysler Newport. The car ran great when pulled out Saturday 10/01/2022. We are replacing this with a sporty 512 Big Block so I am keeping the distributor and front accessories/pulleys. Other than that, this engine is...

I've got a 71 Dart Street/Strip car with a 414 C.I. stroker and a procharger with a Holley HP converted to blow through carb. Been running this set up since 2019 with great results and doing dragweek a lot. The timing is locked at 20 degrees. Typically this setup idles great in park at 900...

Another drag n drive event has popped up down in Florida. This one is being put on by 2019 Dragweek winner, Tom Bailey. We’ll be down there in our 71 Dart shooting for 10.00s as usual. Come say Hi if we get close to your neck of the woods

Hey guys, I'm building a 400 based 512 stroker for my wife's 68 Chrysler Newport 2 Door. Our goal is 11.00 flat in the 1/4 mile but very streetable. We do Drag week and this will be her car... so lots of street miles! Goal is 600 Horse because the boat weighs 4,000 lbs. Going with the...

There was a member on here that once sold me a really good street/strip 904 transmission he built. I can't remember his name but I believe he was located in Pennsylvania. Anyone know him? I think his first name is Stan? Trying to get in touch with him to see if He'll build me a 727 for a...

Starts in Martin, Michigan this year. Anybody else going? I was signed up for 2020 so when it got canceled I got to early register for 2021. Been busy getting the Dart all tuned up and ready. Freshened up the Cope built 904 now its just down to tuning. Going to a test and tune in Bowling...

Went down to Jakes Dragstrip in Danville, AL this weekend for an event put on by Rattymuscle cars called the Mopar vs BrandX street car showdown. They require a 40 mile drive before the race to prove it's a street car. I was in a class called Barely Legal since my car has a power adder...

I'm getting my street/strip 71 Dart back on the road and ready to compete in Drag week this year for the 4th year in a row. I didn't think the car was leaking any fluids... first few test drives and the underneath was spotless. The car sat in my car port for 4 days then I noticed a puddle...

Looking for a used Edelbrock Performer part #2176. For 1985 Ramcharger with a 360. Let me know if you want to get rid of one. Thanks, -Cody

Roll call! I got registered for DW2020. Anybody else going this year? This will be my 4th year in a row for the Dart!

Hey guys, I'll give a little back story on my build then copy and paste what I had put in my thread on the Forced Induction Section. 71 Dart Street/Strip. 360 block bored .060 over with a 4 inch crank making it 414 cubic inches. Aluminum Indy T/A heads. This was built for boost so its right...

This is the same intake that came on the 380 Horse 5.9 liter crate engines. Great if you are planning to run boost through a magnum engine because there are not many Single Plane options. You can no longer buy these new you have to find used. I built an LA stroker motor to run with my...

Drag week is going good, but I need a little help. Car just went 10.54 but only 119 mph, should be 129-130 range. 414 small block with B1SC Procharger 9 lbs of boost, Cope racing 904, Ultimate 5,000 stall converter Wondering why it’s falling off on the big end. Somethings wrong bc it’s gone...

Took the Dart to Bowling Green on Saturday and ran 10.65 @ 128. The car launched hard, pulled the front wheels almost a foot off the ground then lost traction. I have SS springs, CR 9 way adjustable shocks in the back. Cheap 90/10s up front. The Back shocks are set on 7. Should I adjust...

As ad says, needing this emblem for the 71 Dart Swinger. There is a picture of what I'm needing below. Thanks.

I have TTI 1 7/8 race headers and just installed new engine in my 71 Dart. It has a milidon road race oil pan and one header tube is resting on the top of the kick out. Any tips on getting clearance without removing engine or headers? This is on the drivers side and this header was a...

Just got registered! What other Mopars will be there? Sold out in 4 minutes this year. Now I just have to finish rebuilding the dart! Can't wait.

As ad says, needing this emblem for the 71 Dart Swinger. There is a picture of what I'm needing below. Thanks.

I recently installed a fiberglass bumper and aluminum brackets on my 71 Dart. It's kind of a sleeper so I didn't want to just paint it black. Wanted to keep the stock look so I got it wrapped in chrome vinyl. I wasn't sure how it would turn out but I like it! Since it turned out so good I'm...

my new combo will be an internally balanced 360 based 410 stroker built for boost. I'll be running a Cope built 904. Can someone recommend an SFI flex plate for internal balance, 6 bolt crank, and 904? I've looked at B&M 10230 but it is for 727 converter. The 10231 says it will work for...

I am researching these. I think I'm going to run one on my 71 Dart with a procharger and blow through carb. I am currently running water/meth injection but I'd like to run both. I think I have room behind the grill/ in front of the radiator. Lot of options out there and just curious the...

I am installing TTI 1 7/8 headers on my 71 Dart. Manual Brakes, Manual Steering. Passenger side was easy of course. Driver's side is giving me trouble. Anyone have any pics of these headers after the install from underneath? #7 is a slip tube but I'm having lots of trouble trying to get it...

Hey guys I need some help. At wide open throttle the car is too rich at lower and mid RPM ranges. Like 10.5:1. By the time I hit 6,000 RPM its much better at like 12.0:1. This is a 360 with a procharger and Holley HP 750 converted to blow through. Running 10 lbs of boost. What would I need...

Hey guys, I have recently installed a Holley HP 750 carb that has been professionally converted to blow through. Recently installed a P-1SC Procharger on my 5.9 Magnum build. Also, installed a water/injection kit to keep the air charge cool. I have a AEM wideband AFR guage. My readings are...

Guess it's time to just start a thread on my build. Some of you know I'm adding a procharger to my junkyard 5.9 magnum. Some of these things I've already done and will post pictures, others I will post along the way. I did dragweek last year for the first time just to see how I liked it...

I'm adding a Procharger to the Dart and need to upgrade my fuel system. I'm going with a 1/2 inch sending unit in the original location in the tank. I'll also be adding a bung for the return line. Using an electric pump then Need 1/2 inch feed line to the boost referenced pressure regulator...

Hey Guys, just thought I'd share my 1/8th mile ET differences after swapping out the 8 3/4 with 3.91s to a Dana 60 with 3.54 gears. Also added a 6 point roll bar but deleted the carpet. So, maybe I added 50 lbs total? Still have front and rear bench seats. The track didn't have scales. The...

No Shine **** List This is not a Mopar only event but still very fun. You meet at Jake's drag strip in Danville, AL at 10 a.m. Do a 65 mile cruise and then back to the strip for some old school heads up flagged drag racing. Check out the Facebook page for the rules. Feel free to come out even...

The Title says it. Needing this for my 5.9 Magnum, I'm going Procharger so need to switch to single plane. Would like to pay cash for one but could possibly trade my Edelbrock Airgap that is currently on the car. Thanks