Search results for query: *

Thanks for the responses all. I have a Kevko Xtra capacity Pan and Pickup on the way. Going to be putting a Brand new, Never had oil in it Milodon 8 qt Truck pan and pick up in the for sale section very soon if anyone needs one.

How much Cam you looking for? I have a Hydraulic Roller sitting on the shelf that I might be willing to part with but it is a pretty stout Cam. It is a Bullet Custom Grind. Dur at .050 - 236/246 Lobe Lift - .3750/.3750 Dur @ .006 - 292/302 Gross Valve Lift - .563/.563 109.5 centerline Would...

Anyone have an old junk Small Block Bellhousing laying around they would be willing to sell fairly reasonable? Does not need to be pretty. OK if it has a crack here and there too as it is never going in a car. Just going to be used to hold the starter and mount to the run stand.

Thanks for the response. That is what I thought but wanted to make sure.

I just bought a Motor from someone that had it built by Hensley Performance for his Lil Red Express Truck. Since it was built for a Truck, It has Rear Sump Oil Pan. I will be putting this Motor in Duster. Do I have to swap the Oil Pan to a center sump or will a Rear Sump work in an A Body?

I need a FRONT Side Marker Light Assembly (Housing and Lense) for the Driver side for a 70/71 Duster. Does not need to be perfect, Just Fair condition is good enough as this is for a Daily Driver. Msg me if you have one you are willing to part with for a fair price.

Thank you for that Link. I think you are correct. Looks like i will have to get a different Steering box to finish this conversion.

Yep. Checked that many times. The output shaft is Here is the Steering Box. Only Number I could find on it was stamped B0830H Output shaft measures 1 1/8 Inch across the large Splines. Both K7074 and K7075 Pittman Arm hole Measures 1 3/64 (Just under 1 1/16) across the large splines. With...

I am building a 1974 duster and doing a Manual Steering Swap on it. I bough a rebuilt Manual Steering Box a long time ago at a swap Meet and finally getting around to using it on this build. My Issue is I am having a very hard time finding a Pitman Arm that fits the output shaft. I have tried a...

The Molex Pins came in today. I got the .093 14-20 AGW Molex Pins and .063 18-24 AGW Molex Pins. The .093 Pins do fit the Smaller Female Connectors in the Turn Signal harness but are a little loose in the housing. The .063`s Are just too small for anything. More research and it looks like...

While I agree with you in principal as that is how it should be, The reality is Black is NOT always Ground or DC Negative on Mopar factory wiring. The Ignition Switch wiring that we are discussing is one such example. There are 5 wires from the Factory Switch: Red -> 12V + to Switch Blue -> IGN...

Yep. Have to Jump the Blue and Brown Wires (IGN 1 and IGN 2) to get power while cranking. Also as noted above, The Black Wire from the Ignition switch is defiantly not a Ground. It is the ACC circuit and Hot while the Key is in Run and when in ACC position. Thanks for the tip on Headlight...

Thanks for the information. I have the Molex Pins ordered and will report back when they come in on how well they work. What I am doing is a little different but should be pretty nice when complete. This car is going to be a Street-Strip/ProStreet Build. I am doing a full EFI Conversion on it...

I am rewiring a 74 Duster. Built out a new panel and all new wiring but wanted to use factory style connectors to connect to the Steering Column Connectors. Trying to find the Male Pins. Looks like two sizes. What are these Pin Connectors called and where can I buy them?

This is a New in the Box complete set of Speedhut Custom Gauges. These have never been out of the box at all. Also comes with a Dash Carrier for a Plymouth Duster. I paid over $900 for just the gauges a while back and I paid $250 for the Dash Carrier for a build I am working on. I have since...

Offset is different than Back Space. All the common aftermarket wheels I found have 4.5 Backspace (Which is 0 Offset usually). Both are measurements on how the wheel will sit in the wheel well. Backspace is a measurement of the mounting surface to the back of the wheel. More backspace will...

Yes. It is BBP all the way around.

I am building out a 1974 Duster and need to order wheels and tires. Wanting to go with Cragar SS Style wheels and want to Run 275/60 R15 Mickey Thompson ET streets on the back. Running 8 3/4 A Body Rear End. The car has Ladder Bar rear suspension and 3" Offset hangers for the rear leaf springs...

I have a 74 Duster that I am wanting to convert from Power Steering to Manual Steering. I have a Manual Steering Column and a Manual Steering Box. Will I need anything else like a different pitman arm or idler arm for this conversion?

I know asking which Cam to go with is a lot like asking which girl is prettiest.. But.. I am rebuilding a 440 for the first time. I have built several small blocks over the years but this is my first Big Block. Looking for opinions on which Camshaft to go with?? Car Street/Strip 1971 Duster...

I still pop in here from time to time. Sorry I never really followed up in this thread from 5 years ago. Was really shocked to see that horrible video I did 5 years ago now has over 34,000 views on Youtube. (Need to tell Speedmaster they owe me a discount next time I order from them. LOL) The...

Yep. I am running MSD Iridium Plugs. will be ordering a set of NGK`s tonight.

I know that it was NOT degreed in. I asked the seller about it when I bought the car and he said No, He did not have a degree wheel and just lined up the dots.

Yes on the full throttle. I have check and verified that several times. As to Stall, That is another unknown but it is definitely looser than stock but I am not sure . I have been leaving at about 2,500 rpms and have a digital shift Light tach. Set at 6000. The second to third shift light comes...

I bought a 71 Duster a while back that spent most of its life as a Bracket car. What I do know about it is: 440, 906 heads, Single Plane Strip Dominator, Large tube Fender well headers, 4" exhaust, 3:91 Suegrip, Subframe connectors, 727 with Reverse Pattern Manual VB. Running on 295/60 R15 drag...

I have a 71 Duster that I am converting from Manual Steering to Power Steering. Ideally I am looking for someone that is going the other way (Power to Manual) that wants to swap. I have a Black Floor Shift Manual Column and Manual Steering Knuckle Looking to trade for Floor Shift Power Steering...

I have a 71 Duster (Currently has a 440 in it but was originally a /6 Car). (Floor Shift Column, Black Interior). Looking to trade my full Manual Steering Setup (Knuckle, Pitman Arm and Steering Column) for the same in a Power Steering Setup. If you are looking to go from Power to Manual, Lets...

Some great information in this thread. I just went through a similar dilemma with my 71 Duster - 440 in it. I had no factory wiring as this was a former drag car I was bringing it back to Street. It had been previously wired with all toggle switches and a push button for a the starter. I...

A Pair of Bucket Seats out of a 71 Duster. Looks like they were recovered at some point in the past. Seats are in good driver quality condition. Pictures included of Minor Tears and Flaws. Seat Tracks INCLUDED!! I will NOT ship these seats. They must be Picked up in Marietta Georgia or you...

Thanks. That is what I was thinking too. Just wanted to get a few second opinions to make sure I am not over complicating things. I just ordered this relay Amazon.com: OLS 12V DC 120 Amp Split Charge Relay Switch - 4 Terminal Relays for Truck Boat Marine: Automotive and will use the Trans NSS...