Search results for query: *

  • Users: Snake
  • Content: Threads
  • Order by date
  1. Snake

    Outdoor led rope lights

    I bought thease lights for my gazebo, but they are too bright, I tried Amazon help they wear no help.my question is can I hook up a dimmer switch? Also will the dimmer switch work with my timer.thanks very much.
  2. Snake

    Sun shade

    Looking for something to shade me from the sun at car shows,just don't know what to trust, the last thing is it becoming an kite and damaging cars.i have missed many shows due to the sun beaming down on me,13 years ago no problem. Help me get to some shows again so what's good and bad.thanksssss...
  3. Snake

    Purple cam for SB.

    Can't find the mopar purple cam 280/474 anywhere, I had that cam once and loved it nice idle and pulled like a fright train.what I like I was able to use stock push rods and rockers,just had to change valve springs comp 904.if I can't find my old cam what is a dead ringer close specs as the 280...
  4. Snake

    Master cylinder

    First off hello my fellow Mopar gear heads.i have a post on B bodies,but more options is best.ok I have power brake disks 11 inch disk and 11 rear drum.i want to go to manual disk,up front.i have been searching on line for a M/C . Doorman part number MCA 75817 any thoughts.cheers.
  5. Snake

    Engine mount

    I have a set of 71 318 B body engine mounts will they work on a 70 A body Duster.that has a 318 thanks gents.
  6. Snake

    Axle bearing grease

    Just pulled my axles out for a gear change,the bearings are 2 years old,timkins.should I add more bearing grease to them,before I slide them back in.cheers.
  7. Snake

    Pumpkin install tips

    Looking for some ideas on installing my 8 3/4 pumpkin,has any one fab up a peirce of plywood than put it under the pig and use a floor jack,I will be working on my back and soon to be 62 hope you get my drift. Thanks for your thoughts
  8. Snake

    Engine mount carnage

    Well I got time to change the mounts ,driver side almost tore in half passenger side not to good either, they wear 2 years old.went with Mancini will see how they do against the torque monster. I am glad I had the left side chained up.
  9. Snake

    904 slip yoke 7260

    My local shop installed a new u joint 2 years ago,they said the old joint was spinning 904 7260 slip yoke is toast they take welded the end caps.this winter I am taking the 323 pig out and putting in a 355 s/g pig in so sounds like the right time to get a new slip yoke, anyone know who sells...
  10. Snake

    8 3/4 info

    HI gents does any one know who sells an rebuilt 8 3/4 in Canada.i could go the USA like DR Diff, but shipping would likly put me in the poor house.
  11. Snake

    [WANTED] 8 3/4 center section

    Hi I am looking for 8 3/4 489 sure grip with 355 gear rebuilt would be a bonus. Thanks Don.
  12. Snake

    memike

    memike is he still on this site.
  13. Snake

    Engine mount bad

    Just notice this today,I don't remember the 360 with a lean,I do have the left mount chained down,have a look see.
  14. Snake

    Holley stubstack

  15. Snake

    [SOLD] 3 row rad

    Hi I have a 3 row radiator that came from a 70 340 DART 26x17 needs rebuilt.as you an see it has a shroud that someone has trim the top dum ***.asking 100.firm.
  16. Snake

    Advance spring

    SO my new factory distributor had stock springs, I got the Mr Gasket spring kit.pulled 1 heavey spring and put 1 lighter spring in. Awesome throttle response,but it pings at part throttle but not at wot.360 30 over 9 2 1 compression.18 at idle and 34 , full advanced i have put my old dizzy...
  17. Snake

    Holley part missing.

    Rebuilding an 4160 1850 Holley.when I removed the secondary metering body, to my surprise there is no thin metering plate. WTF.i got this carb thrown in on the deal,so I need that plate,I have never in all my years,came across this.Or maybe there is a mod done to the secondary.I have bean...
  18. Snake

    Holley kit 37 119

    This is for the 600 holley 1850 I can score this kit it's unopened for 20 dollars,but his add says for Ford and AMC.i thought 37 119 would work on any 1850 yes or no.thanks
  19. Snake

    Headers

    Looking for some headers ,I am on a budget being retired and on a fix income.so I can't afford TTI ,who makes a better header Headman or Hooker.i just your thoughts. Thankssssss.
  20. Snake

    489 price

    HI guys,I could use some input, on a price .i found a 489 355 gear clutch shure grip rebuilt, in Canada for 1900 its been a few years since i bought a 489. i have 323 shure grip clutch 489 rebuilt now but want a 355,it was ship to my door for 1400 3 years ago.is the 355 a fair price...
  21. Snake

    Foging an engine

    Do you fog you engine for winter storage,I have never done this.thoughts please.
  22. Snake

    power brake booster part.

    hi guys, I need the grommet for my org power disk brake booster this is for my 71 Satellite went for a rip the other day and the check valve and grommet came off NO BRAKES.i tried with no luck can someone help me find that rubber grommet please.i check rock auto it looks like they have just...
  23. Snake

    comp 268 cam too small.

    Looking for your thoughts,on another cam.my old 360 Dart had the purple cam 474 280 nice sound and performance.my build now is 360 speed pro pistons 30 over 9 2 1 340 J heads 202 valve Edelbrock RPM PERFORMER intake hooker headers 268 comp cam, my engine builder says that's a small...
  24. Snake

    Holley float level

    Hi guys, my new Holley has the clear window to see when i am adjusting the float level.as we know with the old screw we set the level wear we rock the fender and it drips out.now this window is kind off big,some-wear i read too set it half way up in the clear window.never had a carb like...
  25. Snake

    REMFLEX GASKETS BLOW OUT

    In 3 years I have had 2 blow out on number 7 cyl I was in first gear and stood on it I got my new 650 holley on ,that shure woke it up for sure,any how by the time I let off bang another blow out.i do keep an eye on the header bolts.dont who why this is happened.thease are old hookers made well...
  26. Snake

    Slow going from first to second

    904 with Trans go 2 shift kit.normaly I like shifting manually,when getting into her.cruseing shift Fine all 3 gears,but if if I floor it takes forever to go from first to second ,me hopen it's just an throttle pleasure adjustment.thanks for your help boys.
  27. Snake

    Advance spring

    I have just put in my new dizzy after having a shop change the 1 advance spring. I had one left over from my MR Gasket . now it pings big time, tried to retard her some help a little, but lost some power.i think that spring is too light advancing to fast, who has a few to choose from.THOUGHTS...
  28. Snake

    Holley 4150 fuel line.

    Hi gents, thinking of building my own fuel lines for my 4150 HOLLEY.i AM PRETTY SURE I WILL NEED 2 5/8 lines, but what i don't know and wear to fine it the brass block that the 2 lines go into, who has done this and can you send me to the right place.thankssssssssssss again.Don.
  29. Snake

    Holley info needed.

    My cindy bought me a new 650 vs duel feed carb. on the horn the list number is 0-80783c never seen this number befor.so does any 1 of you have this carb and did you like it.i have a post on our sister site FBBO.just want as much info as i can get.thanks gent.
  30. Snake

    Battery

    My battery is almost 6 years old, what is better 800 cca or 650 cca, my 71` has 360 with 9-1` compression.just priced out some and wtf are building them with gold.
Back
Top