Search results for query: *

I am wanting to replace the generic round chrome (rusty) exhaust tips on my Dart. I realize the car came with single exhaust, and I don't recall seeing any "67" tips. However I was hoping to install a set of 68 rectangle tips. I see a hole in the rear frame rails (both sides) I think could be...

Just wondering if I need to order anything "special" to replace the converter in my 67 Dart? I seem to recall something about input shaft differences in early transmissions. I am getting ready to rebuild the 904, and figured I would switch to a slightly higher stall to help the little motor...

Ok. Likely too many beers and too many dreams, but..... My 67 Dart GT 273 is having oiling issues, that I haven't had time to diagnose. When all of a sudden, a guy calls me up and wants to sell me a good running low mileage 68 383 4-bbl motor for $600. I did some quick internet searching, and...

I installed a new power disk brake setup from Right Stuff on my 67 Dart. Everything seemed to fit nicely and bled easily. On the first drive I noted significant drag on the front. I did keep the original proportioning valve in the system. The brakes release immediately when I cracked the line...

The 273 in my Dart appears to have been rebuilt at some point in time since it currently has hydraulic lifters. The rocker shafts have shims under them, so I am guessing there has been some block/head work. While adjusting the rockers, I found there seems to be very little oil getting to the...

Gone

I have a collection of 10 hubcaps I had for my Dart. 14" They are all in decent shape. They are all used and few have some minor dents. I would classify these are "good driver quality". $200 for all 10, or $40 each if you pick and choose. Located in Raceland LA, but I will be traveling...

I have 6 wheels from my 67 Dart. 14x4.5. They come with 4 new tires mounted 195/70-R14. Less than 50 miles on the tires and they are only a few weeks old. Selling all for $500. (I have more than that in the tires) I upgraded to 15" and no longer have need for the 14". They are located in...

I have a complete 7-1/4 rear end I pulled from my 67 dart. The brakes are 10" and the axles are small bolt pattern. Pretty sure the gears are 2.94, but I haven't verified that (yet). I did rob the parking brake cables from it and one of the LH wheel studs is broken off. I know this is not a...

I am doing a rear end swap in my 67 Dart (273/904) from 7-1/4 to 8-3/4. I have drive shaft that should work length wise, but after pulling the stock yoke, I am questioning WHY the slip joint is so long.

I have noted on a few of my B-body toys, that some cars came with tail light covers or even cardboard panels inside the trunk. So, as I was installing an electric trunk latch and LED lighting in the trunk of the Dart, I became curious if there was ever a trunk "dress up" package for the 67 Dart...

I put the motor and transmission in my GTX over the weekend, buy seem to have lost the driveshaft. (Has been apart for 20 years and moved garages 5 times) According to the chart, it is a 53.64" long driveshaft.

Soooo. I have 2 of the Mopar 2944390 15x7 rallye wheels. I am trying to decipher the date code.

I am looking for a transmission cross member for my 1970 GTX. I put mine somewhere "safe" 15 years ago when I took the car apart. It is so safe I can't find it....may have been sold accidentally. Thanks! Scott

Ok, once again to prove my ignorance of 273's......I see a few manufacturers selling 1.6 rockers. It got me to thinking maybe it would help my little motor breathe a touch more without actually having to open up the motor and change the cam.?? In all honesty, I have not yet actually measured...

Did the 1967 Dart have any options for graphics from the factory? I have seen some with stripes, particularly the GTS and Mr. Norms cars, but I was wondering if they were "original". My 67 Dart GT has the front fender emblems, but no stripes or graphics.

I picked up a really solid 1967 Dart GT with the original 273 (auto) with 84k miles. I have been driving it quite a bit and love it! ❤️ However, it doesn't have much power/acceleration. As time permits, I plan on upgrading to disk brakes, 4.5 bolt pattern wheels, and an 8-3/4 rear end. But...

I have newly acquired a fairly original 1967 Dodge Dart. While not perfect, it is in "better than average" condition. I am going through the car to make it a dependable driver for now. While checking the lights, I noticed the front parking lights go out when I turn on the Headlights. Turn...

A friend just found a super nice 1967 Barracuda. He is not a hard core mopar guy, and I am extremely jealous that he found this car for a reasonable price. But, I am looking forward to converting him into a Mopar lover! The car appears to have the original 273 motor, but there is no timing tab...