Search results for query: *

  • Users: jrlegacy23
  • Content: Threads
  • Order by date
  1. jrlegacy23

    [FOR SALE] 408 Magnum Stroker, TCI 727 Super Streetfighter, Holley Sniper with Hyperspark

    Looking to possibly sell my entire engine, transmission, Ignition, and fuel injection combination (Less than 1000 miles on entire set up) to start a different engine project. This is a pretty fun and fast engine combination for the street. Engine: It is a 2001 5.9 Magnum stroked out with a 4"...
  2. jrlegacy23

    [SOLD] 1968 Plymouth Barracuda trunk lid

    I have a 1968 Barracuda trunk lid off from a fastback that is in decent shape. There is some surface rust and a spot with a few holes (see pic), but overall is in great shape. Not rotted out like most of them you find. I have no truck trim available for this, asking $400 or best offer. I am...
  3. jrlegacy23

    I need help with Magnum Edelbrock heads.... Which valves?

    I messed up and did not get a keeper on the vlave correctly on a set of Magnum edelbrock 61775 heads. I ended up bending the valve. Edelbrock gave me part number 39-1210 for the valve but said I had to go thru summit, Jegs, etc. Long story short, Jegs is the only one that sells it and states...
  4. jrlegacy23

    [FOR SALE] Jegs billet distributor/electronic conversion

    I have this small block electronic ignition conversion kit that I bought in May 2021. It is the Jegs brand, and works flawlessly. I am swapping in a new engine and going to the Holley Hyperspark ignition. It is a billet aluminum distributor (does not say "Jegs" on it like the pic), blue...
  5. jrlegacy23

    68 Barracuda trunk molding top on bottom

    I have been having issues finding a decent lower trunk molding on my one year only 1968 Barracuda trunk lid. I have a spare, real nice upper molding that seems to fit nicely in place of the lower. The only issue I see is that the brackets slide in a little different but can be trimmed to fit...
  6. jrlegacy23

    [WANTED] 1968 Plymouth Barracuda Trunk molding/trim (bottom)

    I need the trunk molding or trim piece. I really only need the bottom one but will buy upper and lower if I have to and the price is right. It does not need to be in perfect shape, but I already have one that looks like it has been swatted upside a guys head. This is my car with the piece...
  7. jrlegacy23

    [SOLD] 42 5/8" Driveshaft with 1330 UJoints and 46RH slip yoke

    I have a 42 5/8" long driveshaft, made by Precision Shaft Technologies. This was in my 1968 Barracuda with an 8.8 rear end and 46RH/A518 transmission, and will fit any 108" wheelbase car set up the same way. My 8.8 is shortened 3" and the flange is centered in the differential. I had it was...
  8. jrlegacy23

    [FOR SALE] Brand New Edelbrock Valve Springs #5845

    I have a brand new set of 16 Edelbrock "Roller Cam" valve springs from a set of 61775 Heads. These are dual springs with dampers, 7 degree locks and keepers, on an 11/32" valve stem. Edelbrock tells me that Summit Racings spring rate listed (465 lbs/inch) is wrong and that they are 420 lbs per...
  9. jrlegacy23

    Are Edelbrock Valve seals any good?

    I just bought a set of small block Edelbrock heads and are having the new Howards Cams recommended valve springs put on for the roller cam that I am using. How are the Edelbock valve seals? Should I replace them while in there, or are they pretty decent? This is a 400ish hp 408 Stroker being...
  10. jrlegacy23

    [SOLD] Brand New Edeldborck RPM Air Gap SB intake 7576

    I have a brand new, in the box and wrapped in the original plastic Edelbrock RPM Air Gap intake manifold for a small block LA. I bought this and ended up changing to a 5.9 Magnum. I will sell for $350 shipped from Laurens, NY.
  11. jrlegacy23

    [WANTED] 408 Stroker kit 5.9/360 Magnum

    Looking for a stroker kit for a 360 Magnum engine, internally balanced, or external is fine. Let me know what you have. JR
  12. jrlegacy23

    [Found!] Left Rear Window Regulator 68 Barracuda Fastback

    I MISTYPED, I NEED THE RIGHT SIDE I am looking for a passengers side window regulator on a 1968 Plymouth Barracuda fastback. I need everything but the glass itself. May be interested buying both sides if you have them in good shape It has to be a fastback Thanks ahead of time. This is the...
  13. jrlegacy23

    I have 1973 Block #3B519286

    I am going to put this January 1973 340 Block in my 68 Barracuda over next winter, unless is goes to your car. The Engine originally came from the Delaware.
  14. jrlegacy23

    How do I tell if my 340 is internally balanced?

    I have a 73 340 (January 73 build date), it looks like it is internally balanced as it has a thin, internally balanced harmonic balancer, the crank is cast with a windage tray), the pistons are forged TRW .030 over, the crank look counter drilled in the pics.
  15. jrlegacy23

    1968 Leaf spring code 132

    I have the rear suspension apart on my 1968 Barracuda Fastback. I noticed that it has 6 leafs on both side and a 5/8" front mounting bolt. So doing measurements, the front eye to the perch pin is 20" and the leafs are 2 1/2" wide. Checking the broadcast sheet, I see that it was marked Rear...
  16. jrlegacy23

    Cloth seats in a 68 Fastback

    I am trying to find out more about my car. I finally got the fender tag decoded, and the broadcast sheet is very faded. But my interior code is H5B, which the fender tag shows "High Trim Grade Light Blue Metallic". I found on other decoding sites that the interior option on the build sheet...
  17. jrlegacy23

    1968 Plymouth Barracuda Fastback (old school build with a new school feel)

    I finally found a good deal on a 1968 Barracuda Fastback. It is just a 318/Auto car, but soon to be a 340 OD car. I plan to save all the original parts too make it have all the numbers matching stuff for my son one day (He is 8 years old now, so if he becomes more of a numbers guy). From the...
  18. jrlegacy23

    A500/A518 Cars, OD and L/U on a toggle or auto?

    I am in the process of doing an A518 swap in my 68 Barracuda. For the guys running a similar set up, do you have toggle switches for the overdrive and lockup? Or do you run an automatic OD and L/U set up? Which do you prefer and and why? I am looking at a PATC kit (link below), or running rocker...
  19. jrlegacy23

    A518 Transmission, no reverse when hot

    I just got an overdrive trans for 1968 Barracuda. It is a 1993 Dodge A518 (46RH) transmission that was pulled from a half ton van. The tranny was working fine and then started losing reverse when it is hot. When the engine is cold it operates fine; but once up to temp, the reverse in the tranny...
  20. jrlegacy23

    [FOR SALE] 1970 Dodge Dart Gen III hemi swap

    In the middle of a project and I may have found a car that I have been wanting for a while. So, I need to sell this so I can move on to the the next car :) It is a 1970 Dodge Dart, originally a southern 318 car, To be 100% honest, there are a couple "pimple" bubbles of rust behind the drivers...
  21. jrlegacy23

    One of the best videos from my 20 year reunion

    Guy I graduated with wanted to take his first shot:
  22. jrlegacy23

    What kind of Gen III engine would you build around this Cam?

    I have a stock 06 5.7 Hemi in my 1970 Dart right now. I have been wanting to build a nice Gen III to replace stock and got a really good deal on this Comp Cams camshaft. It is a "6.1" Hemi cam, NON-VVT, and was told that it is speced for a supercharged application. What kind of engine would you...
  23. jrlegacy23

    Go B5 Blue or stay Viper Green?

    I have been working quite a bit on my 1970 Dart. When I had the engine out (5.7 Hemi), I had the engine bay painted Viper Snakeskin Green (My engine by pictured below). I have been thinking about painting it newer B5 Blue. Just curious on every ones thoughts about re-pulling the engine and...
  24. jrlegacy23

    Jeep SRT down pipe flanges

    My cousin has a plasma table and is getting ready to cut me some flanges that will bolt to the Jeep SRT Hemi manifolds. They are designed for a 3" down pipe. I only found the flanges for $40 each, but he can do it quite a bit cheaper. He can do them in stainless or steel. Is anyone interested?
  25. jrlegacy23

    6.4 Valve springs on a 5.7?

    Anyone done this swap? I am looking to use them to do a future cam swap, and picked them up real cheap. I have done a lot of google searching, and only came up with one Ramforumz posting that state 5.7 springs have an installed height f 1.8" and 6.4's use 2.01" (something along those lines)...
  26. jrlegacy23

    [FOR SALE] 1970 Dart with 5.7 Hemi swap

    In the middle of a project that I have been losing interest in, and thinking about selling. It is my 1970 Dodge Dart, originally a southern 318 car, there are a couple bubbles of rust behind the drivers side tire and a small spot (1/4") on the drivers side floor pan (below gas pedal). This car...
  27. jrlegacy23

    SRT Exhaust manifold down pipes??

    What are you guys doing for cat free manifold down pipes? I was looking through the Walker catalog and could not find big enough 2 bolt flanges. I saw some online but unsure if they would work and did not come with the pipe. What are you guys using? Is there a part number for easy access or are...
  28. jrlegacy23

    Milodon Oil pan/pick up hitting the crank, or flex plate backwards?

    I am not sure what the issue is yet or not. But I would like some advice from some experienced guys here. I started with a 2006 car 5.7 Hemi. I swapped the car, Nag1 flex plate for a truck 545RFE flexplate. I then pulled the car oil pan and oil pick up tube. I used the Milodon Oil pick up tube...
  29. jrlegacy23

    Welding trim holes on 1970 Dart

    I have been welding up the vinyl top trim holes, and then whizzer wheeling them down flat. Everything has been coming out perfect without any plastic filler. I am now at the point of filling the holes where the trim is on the body line (see picture). Does anyone have experience with these holes...
Back
Top