Search results for query: *

Any chance you have a timing pointer to go with it?

Would you ship the timing cover international (to New Zealand) ? thanks, Steve

Hi All - I'm looking for a 68 or 69 Power Steering box which I need to be shipped direct to FirmFeel as a rebuildable core. I'm in New Zealand so shipping the original back o the US is a bit costly...

Hi, I'm looking for the Brace and Support brackets for a power brake booster. Not sure of what years will fit but mine is a 1967 Barracuda. Anybody have any of these laying around that are not needed anymore? I will need them shipped (USPS is good) to New Zealand. Thanks, Steve

And the spare crank I have is a forged 273 piece.. I will rebuild the original 273 in the car eventually, the 318 can go to another project once its out of the Barracuda.

I'm looking to keep the car running until the new engine is built, it goes OK just a bit tired and fumy. I have way to many unfinished projects around as it is so wantto keep downtime to a weekend. I guess I can get under the car and let the converter go and see if I can get it back far enough...

What year did the 904 torque converter get the larger diameter front snout? did the early forged 273/318 cranks all have the small pilot hole? I am building a 318 to replace the 273 in my Barracuda and have an early small pilot crank, want to make sure it will fit the converter.

Thanks for the info, glad I checked up before getting the balancer engraved at 90 degrees! I was hoping to get the new unit engraved but if I cant be exact with the position of the mark I'll get a blank balancer and do it myself.

Hi All, I am replacing the harmonic balancer on my 273 and the good folks at Precision Parts who manufacture the Powerbond brand, are happy to re-work a 318 balancer with the correct timing mark but I need to tell them where. I have read in threads that it is 90 degrees different but when I...

Thanks Guys, I got a little side tracked and haven't checked back for a while. I am now running the TRW pump (Federal style) cast iron water pump and all the correct brackets and pulleys, no a/c. I measured the belts with a tape measure and learn't that's not a good idea as they sit down a...

I just finished replacing the incorrect Saginaw power steering pump, water pump pulley and crank pulley that were fitted (badly)to my '67 273 Barracuda with the right ones. I'm now looking for the correct belt sizes, anyone have the sizes ??

Hi Guys, Anyone have a photo of the rear screen of a 67 Notchback Barracuda with the correct gasket, lockstrip and stainless connector trim ?, mine has the wrong seal and no trim so I need to see what I have to track down.

Anyone have the dimensions for the hemi hood scoop, including approximate radius of the corners etc. Steve

Hi, I am looking for a Federal power steer pump cap, anyone got one they want to offload ? Thanks Steve

Thanks for the tip on the 8 1/4 plates - you would think they would be easy to find !

I'm looking for a set of 8 3/4 shock plates and U bolts in nice condition.

http://www.marketworks.com/StoreFrontProfiles/DeluxeSFItemDetail.aspx?sid=1&sfid=92390&c=68055&i=17108692 http://www.marketworks.com/StoreFrontProfiles/DeluxeSFItemDetail.aspx?sid=1&sfid=92390&c=68055&i=17108588 Great pics Longgone, found these for sale and have dealt with this guy before so...

Thanks Jim, you're a mine of information !. Looks like another "modification" to the car that I will have to sort out. Thinking of upgrading the rear anyway so I guess this helps the decision along.

Looking at the rear drums on my 67 Barracuda, they are 10 in ( I think) on a 7 1/4 axle. There are no self adjusters, did they have them as standard in 67. Does anyone have a pic of a correctly assembled set - photo or manual page. I can see where the shoes have been modified slightly to fit and...

Great info on Rock Auto, they have the unit I need for my Charger too. Anyone used them ?

Hey Jim, freight isnt a problem, the guy who shipped me the car from CA will forward stuff on to me. He ships a lot of cars this way and there is yusually plenty of room in the container. But if the in-laws can help out even better ! Steve

Thanks guys, looks like mines had a pump swap which explains the modified brackets and awful alignment, need to find the correct brackets and a federal pump now, if anyone has a spare for sale let me know.

sweet, thanks Jim.

Hi, Im looking for some pictures of the power steer pump and brackets for a 67 273 Barracuda, were these saginaw pumps originally ?, mine has been messed with and brackets modified, alignment is awful and I wonder if a different pump has been fitted. Thanks, Steve

Lots of cold beer in Spain sounds pretty good to me..... Be interested in hearing how the new gasket fits, do they have the locking strip as well ?

I have one of the non correct seals fitted to the rear screen of my 67 hardtop, it leaks and has big gaps between the seal and the frame - very ugly and has to go. So I think I am reading this right, the 68/69 seal and trim will fit the 67 ? and the same goes for the front screen ? Is the...

Hi all, looking for a source for some replacement bumper guard rubbers for a 67 Barracuda, I can find others but not the Barracuda.

I have a 67 Barracuda and I want to replace the carpet, the original carpet still has it's date coded label and was B9 blue. There are several blues available from Yearone, Legendary etc but they don't have the B9 code, anyone know what the cross reference is ?. It is either shade No 13, medium...

Hi Longgone, your setup looks the same as mine, the lower ring that keeps the spring tension on the bearing insulator ( that you are holding in place with the hose clamp ) has a small locking bolt on mine that clamps it on the shaft. There are no threaded holes in the insulator to bolt in to...