Search results for query: *

What are the different options for fully adjustable upper A-arms that will fit a ‘67 ball joint?

1967 Plymouth Barracuda Formula S 383/Auto Fastback A true Survivor with day 2 modifications 383 Commando V8/727 car Matching VIN/Data Plate/Radiator Support Stamping/build sheet (partially remaining) ‘71 440 block 10.25:1 compression Edelbrock Performer heads - 83cc Forged pop-up pistons...

1967 Plymouth Barracuda Formula S 383/Auto Fastback A true Survivor with day 2 modifications 383 Commando V8/727 car Matching VIN/Data Plate/Radiator Support Stamping/build sheet (partially remaining) Mechanically sound, drive anywhere ‘65 383 block 4 year since built, approx 20k miles...

Anyone know the correct diameter of the ‘67 4 piston dust cap? Looking to get chrome if I can find the correct diameter to be a nice press for.

I am upgrading my rear axles to some Yukon 5x4.5 units & need some drums to go on. I didn’t know if there were some ‘74 drums I could possibly bolt on or if I should just swap on a disc set-up. Anyone just swap some later 9” drums with the 4.5” BC.

This is the over the counter Direct Connection crossmember for putting a Big Block into an A Body DC P/N P4007935. $750 This is for the ‘67-‘76 A-bodies & allows you to use a spool style motor mount for installing big blocks. This is for: 1967, 1968, 1969 Barracuda 1967-1976 Dart 1970-1976...

1972 Dodge D100 SWB Old plumber truck, hand lettered paint Original paint on bed sides/fenders/doors Not a fake/faux paint job Truck runs out nice, has good power, it's been a good driver & I have taken it all over the place & out of state with no issues, put roughly 7,ooo miles in the past 5...

Trying to get my daily driver back on the road. Have a '67 383 Barracuda & need a Kelsey Hayes 4 piston Disc brake Hub, my bearing race is loose now in the hub. Let me know what you got, need to get this back on the road.

Ran across this Deal 74 Plymouth Duster Body FREE

Anyone see the '69 440 'cuda on the LasVegas Barrett Jackson that ended up going for 73,ooo this weekend? What's everyone's options, is that a strong price or weak? I am somewhat new into these big block Barracudas but have been paying more attention since I got a 67 383 FB a year ago.

Starting to do the tuning on my 67 Barracuda 383 to get optimum mileage. I use the car as a daily driver for 78 mile round trip & ocassional track use. I am going to get the best mileage out of this car as I can but I am not going to hurt its strip performance, trying to improve it as well...

Duplicate post

Spotted this '68 while watching the new Iron Resurrection from a few weeks ago. It's down at a wrecking yard in Austin.

I have a few parts I am going thu & need to sell. Mallory Dual Point, no vacuum advance, new 3 months ago, has 1200 miles on it now. I would keep it but I daily drive 80 miles a day & need a vacuum advance one. It comes with an extra pair of new points/condenser/rotor which I bought to throw...

Ran across this on the FB

I am about to pull the trigger on getting a Gear Vendors OD for my '67 383 Barracuda. I know they just bolt into a B & E body but what about an A-body, is the tunnel just as wide as the B/E tunnels?

How much up/down movement is within spec on a 1967 idler arm? When the steering is turned to the right it just moves straight/smoothly. When you turn back to the left the idler raises about 5/16" to 3/8" & touches the C-body big block oil pan. I'm not sure if I need to cave in the oil pan or...

Tess Maune ONE LAST CRUISE: David Jones died Saturday after crashing his classic car while driving home from a car show. He was driving his prized 1964 Barracuda Sport Coupe at the time. Jones started building cars when he was 16 years old. His son says there are hundreds of cars on the road...

Looking for a 67-69 Barracuda Fastback rear seat release cams & the bushings that go over the square shaft. My car was disassembled when I bought it & they were not anywhere to be found when going thru the parts. I really didn't even know what I needed till I asked on here a few weeks back...

I'm not sure what I'm missing. Got this car disassembled & when going back together it seems the square release has no way to move the latch. Anyone know if there is a lever or something that slides over the square to move the release?

Curious how many on are currently driving '72 & down Daily Drivers. I'm talking actual primary transportation, not your cruise night car you drive once or twice a week to work when the weather is nice. Let's see some pics of your current daily driven classics. I've been out of a pre '72 daily...

Have shocks coming in today, all my hardware were pulled when I bought the car & I forgot to measure everything before I left the house for work today. Going to try & put it together tonight when I get home but need the sizes. Anyone know on the stock rear shockplates the size of the bottom...

Do all Barracuda Fastbacks have the vent hole in the trim on the passenger side like what maybe a defroster would blow thru?

I've got a '67 Barracuda Fastback & have been searching since I bought this car for the rear decklid tail trim lower piece. It's the one just above the rear bumper. Anyone have any leads to a nice used piece for this?

Looking for a decent 1967 Barracuda Instrument Bezel & Glove Box Trim for a non-AC car. Not looking for a perfect one, just a decent driver one. Mine has been spray painted black & I would like to have some of the chromed plastic & silver parts still showing even if not perfect.

Putting together a '67 Barracuda Formula S 383/auto car for a driver. My plans are this summer to put a Gear Vendors overdrive in but I am now kicking around throwing in a TKO 5 speed. A Tremec is a lot of fun, I put one in a '70 Barracuda about 12 years ago & it made a nice driver. I just...

Looking to buy for my '67 Barracuda Fastback, a Drivers Side Back Seat Hinge. Attached is a pic. I have been looking for a while & not sure where ti get one.

Been planning a shop for a while & finally starting to make headway. This thing went up in less than 8 hours & turned out great. Now waiting on the concrete guys & the overhead door guy. You can see a little of the lake out the back 10' overhead, I'm sure in the summer the...

First snow of the year & it's really deep ...

Looking at getting a pair of tubular upper control arms for my '67 Barracuda for the additional adjustability for my higher ride height. What are some good, quality arms? I know in the past with my '69 RR I came across some aftermarket a-arms breaking at the welds.