Search results for query: *

I gave for sale an innovate digital air fuel kit. Bever used never out of box. Part number is 3844 MTX-L AFR gauge kit. I was told I would need this but have never installed it in my car and don't think I will ever use it. I am posting pics of what's in box with the instructions. I am asking...

I have a set of never used brake hoses that I accumulated while adding disc brakes to the frt 9f my 66 Dart. Not sure what they fit anymore but it's time they go to someone that can use them. I am asking $30 plus the ride cost to ship. I am located in Red Lion PA 17356. Posting a pic so you can...

I was wondering how would mixing 3 gts 20-50 of the same brand oil with 4 qts of 5-30 oil change the viscosity if the total blend. I have a 2011 5.7 hemi in a ram 1500 truck with 65k miled and I had to replace the cam, lifters, oil pump, Vvt valve and phaser. Now at startup it has the "hemi...

I have some questions about a 2011, 5.7 Hemi. I need to understand the way the oil pressure, vvt valve and cam phaser work together and if the oil used can change anything in the operation. Also what can go wrong inside a phaser. ‘Thanks Rod

I am or maybe I should say “was” the proud owner of a 2011 ram 1500 truck with a 5.7 hemi. I’m so disappointed in the 5.7 that I feel maybe I should buy, and I hate to even think this but maybe a Ford! I’ve been bitten by what I am being told is the hemi tick. (And my motor is not making any...

I was wondering, is there any demand for our early “A” body cars. I know there are for the Chevy Nova II, the Camera’s and the Ford Mustangs. But what about the mopars? I am considering the possibility of selling my 66 Dart. I did a major resto mod but it’s a shame that it basically just sits...

I am posting a couple pics of some trm clips for an early A body Dart. I can not remember what they came off of but i have quite a few. Hopefully someone can help identify. Thanks Rod

Headlight switch for a 66 Dart. Im sure it fits other models as well. I replaced with a new switch becauae i updated everything in car. If you cover shipping its yours for free. I am located in Red Lion Pa. Thanks Rod

I have an ignition switch assembly that if you cover shipping you can have. It did work when removed but has been sitting for almost 10 years in the replacement box. I am located in Red Lion Pa. Thanks Rod

I have a set (all 4) of trim pieces for on a front fender of a 270 Dart. I had sent them out to have them powder coated but they couldnt stop them from outgassing where thè parts had pitted. I would like to get $10 for all plus shipping. They still look good just not as nice as i was hoping for...

I have decided not to build a new motor so i am selling my Edelbrock Aluminum Performer RPM small block mopar LA heads that havent been on an engine since the rebuild. These heads are in like new condition with all new parts. Replaced all valve guides, hardened seats, new large valves-2.02...

I have a 66 Dart Small Block that I need to pull the manual steering box off and replace it with a Power steering box. Yes I m getting to old to fight that manual steering. I was wondering if anyone had pulled a box off that had TTI headers. It looks like a very tight fit and I really dont want...

Looking to get some thoughts on swapping my 915J heads to my Edelbrock Performer Aluminum heads. So heres where I am. I have a 66 Dart with a 408. My original plan was to run the car at the drag a few times each year but that hasnt happened and at this point chances are it probably never will...

I have a 66 Dart, 408 with a 904 tranny. I’m using a Hurst Pro-Matic shifter. My first cable melted down from the header heat. So the next cable I protected with 3 layers of heat protection. Drove probably 500 plus miles all short hops. No more problem from heat but tonight the interior cable...

I have some parts for an old Sun machine interrogator. The drive did work and I have plenty of the specialty disc as well as some in opened software packs. Also have many connectors for the overhead and manuals to go along. There is also an additional box of parts not shown that I will include...

I have an intake and carb for a small block that was on my 408 Dart. The carb is a Sean Murphy custom built 750 DP that has been reworked to 830 cfm, 4 corner adjustment. I had this on my Dart but I never made any changes from the original set up it came as. The intake is a Victor aluminum...

Working on my 66 Dart 270 series. This car's been heavily modified and I plan on doing a steering upgrade as well. This was a factory manual steer car with shifter on the column. I've already modified the column to eliminate the column shifter and I've shortened the column housing so it just...

I've asked many questions about putting my TR5 intake and carbs together on my 408 Dart. Got a ton of great help here. But now its time for the next step. I finally got all the fittings in place and sealed up. I have 6.5 psi of fuel pressure with switch on but engine not running and with engine...

I'm getting ready to attempt start my Dart for the first time with the 2x4 setup on it. The only thing I'm not sure about is where do I connect the vacuum secondary pods to? Any help would be appreciated. I am running Holley 600 carbs on an old TR5 Edelbrock tunnel ram. Thanks Rod

I need to change the way my fuel line runs because of heat from my headers. I want to stay within the rules for NHRA drag racing as I hope to run my car a few times. I am working with a 66 Dart that I have added frame rail tie ins. I ran 1/2" aluminum fuel line from the rear fuel pump/tank all...

I have a small air cleaner / hood scoop clearance issue when closing the hood. Im installing my tunnel ram and on the passenger side of the hood the air cleaners both front and rear need a little more clearance. Now there is room to make this clearance but my main concern is what this will do to...

Working on a 408 in a 66 dart. Im getting ready to install my TR5 edelbrock tunnel ram and I need to ask a few questions. Ive run into a few issues with this intake manifold and running some fuel lines. I was wondering what others have used as a fuel block to make a nice hookup? I bought a fuel...

Im getting ready to try my 2x4 set up on my 66 Dart with a 408 engine. I will be using a pair of edelbrock heads, 1.5 rockers, 590 lift on both valves, compression should be right around 11.5-1. I am using a edelbrock tunnel ram with 2, 600 vacuum holleys. Factory jets in the primarys are 65s. I...

I have a set of Crane 1.5 roller rocker set for a SB LA engine that I would trade for a set of 1.6 roller rockers. These came with a set of Edelbrock heads I purchased. The previous owner made clearance on the under side as you can see in the pics. I am located IN Red Lion Pa. Let me know what...

I dont want to break any rules on this forum so I thought I would ask how to do this properly. I have some parts that I would like to see if anyone would trade parts that I need. Is this allowed here on this forum and if so where and which topic do I post under? Thanks Rod

My 66 Dart has manual steering in it now. I have purchased a new Power steering box, Pump and bracket kit as well as a lower pulley. Should be everything I need to do that part of the conversion. I know i will need to change the steering shaft and coupling to make things work. I have what I...

I was wondering what the guys that are running TTI headers on your small block have done to keep from burning boots? Here are my #5 & #7 boots on my 408 small block, I only have about 500 miles on the motor and I am using these DEI Titanium boot protectors from first startup. These are supposed...

Im rebuilding my 2 1850 600 CFM carbs. Everything seems to be going back together with no issues but I found one thing Im not sure about. Now I bought these 2 carbs used so Ive never run them but during the rebuild I noticed that there is an open vacuum port that goes from the side of the carb...

above is a pic from my Holley 600 with vacuum secondaries. I bought a pair of theses carbs from a member here over a year ago and I’m finally getting around to rebuilding them for my tunnel ram on my 408. The throttle lever on the inside is rubbing the bowl transfer tube when the linkage is...

A little over a year ago I purchased 2 Holley 600 carbs from a member here. Carb numbers are 1850-11. Under the carb numbers are 1129. what does that number mean? Is it a manufacturing date? Now these are vacuum secondarys and my plan is to use them on my edelbrock TL5 2x4 manifold. Someone in...