Search results for query: *

Hi everyone , im looking for a set a body small block fenderwell headers , anyone have a set available ?

This listing is for a 1948 Plymouth Deluxe , the car has been in a climate controlled garage since 1999 , the interior and body are in nice condition but the engine is siezed , it ran when parked . Take a look and if you like make an offer . Im $7500 or best offer .

HI EVERYONE , IM WORKING ON A 67 DART 2 DR SEDAN , IT HAS CHROME WINDOW MOLDING ON THE REAR WINDOW AND THE FRONT HAS THE PLASTIC PUSH IN TRIM . IM TAKING THE WINDSHIELD OUT TO REDO THE DASH AND IM WONDERING IF LATER DART SEDANS HAVE CHROME TRIM LIKE I HAVE ON THE REAR WINDOW . IT WOULD BE NICE...

HI GUYS , IM LOOKING FOR A LAKEWOOD 3 POINT ROLLBAR , IM DOING A 70S STREET STRIP RESTO ON MY 67 DART AND AROUND HERE EVERYONE HAD LAKEWOOD ROLL BAR BACK THEN . I JUST NEED THE MAIN HOOP . IF YA HAVE ONE LET ME KNOW

HI EVERYONE , ON TO THE NEXT PROJECT IN MY DART , WHEN I BOUGHT IT THE FRONT FLOORS WERE BADLY RUSTED . I CONSIDERED FLOOR PANS BUT IT WAS RUSTED TO FAR UP THE TUNNEL FOR THAT . I ORDERED THE COMPLETE FLOOR FROM AMD AND WHILE I WAS WAITING FOR IT TO GET HERE A FRIEND ASKED ME HOW I WAS GONNA...

HI EVERYONE , I RECEIVED THE NEWS LAST NITE THAT ATCO DRAGWAY IS IN THE PROCESS OF BEING SOLD TO BECOME AN AUTO AUCTION AND STORAGE YARD . THIS IS QUITE SAD TO SEE ANOTHER DRAG STRIP BEING CLOSED AND A PILLAR TO THE CAR COMMUNITY IN SOUTH JERSEY BEING LOST , ITS NOT OVER YET BECAUSE THE STATE...

HI EVERYONE , I HOPE EVERYONE IS STAYING SAFE .... I RECENTLY ORDERED A PAIR OF SPRINGS FOR MY 67 383 DART FROM ESPO SPRINGS. I ORDERED THE PLUS 2 INCH OPTION . THEY CAME 2 WEEKS LATER AND LOOKED GREAT , HOWEVER AFTER I INSTALLED THEM I ENDED WITH MINUS 3 , THESE SPRINGS SAT LOWER THEN MY 50...

THIS LISTING FOR MY 72 DUSTER , ITS A 440 4 SPEED WITH A NARROWED DANA 60 WITH WILWOOD DISC BRAKES , THE 440 IS FRESH BUILD WITH WEIAND 6 PACK TUNNEL RAM INTAKE , PRO PARTS HEADERS, PORTED 906 HEADS, CENTERFORCE CLUTCH,LAKEWOOD BELLHOUSING, CUSTOM DRIVESHAFT WITH 1350 U JOINTS. WHEELS ARE...

HI GUYS, I JUST BOUGHT THIS DUSTER AS A ROLLER AND ALONG WITH IT GOT THESE HEADERS, I THINK THERE PRO PARTS , BUT THE QUESTION I HAVE IS HAS ANYONE USED THESE WITH A 4 SPEED IN AN A BODY ? IM WONDERING THE Z BAR CLEARS ?

1995 MUSTANG GT , 302 5 SPD , THIS CAR IS AS CLEAN AS IT GETS , INTERIOR AND PAINT ARE SUPER CLEAN AND THE CAR RUNS AND DRIVES GREAT . THE ODOMETER SHOWS 187 K , THE ENGINE WAS REPLACED AT 156K , THE CAR IS FULLY LOADED , AC, PS , CRUISE , TILT WHEEL, 4 WHEEL DISC , ANTI LOCK BRAKES , PWR SEATS...

ITS THAT TIME AGAIN , GOING THROUGH MY PARTS AND I FOUND SOME STUFF I DONT NEED ANYMORE , HERES A LIST OF WHAT I HAVE 1 MSD 6A & MSD PRO BILLET DIST ( FOR B ENGINE ) $ 225.00 2 15X4 ALUMINUM SLOT MAGS ( UNILUG ) $ 350.00 3 BB NON A/C PULLY SET ( NEW...

FOR SALE 1971 PLYMOUTH SCAMP 318 ,AUTO WITH POWER STEERING ,FACTORY AC CAR , THE CAR RUNS AND DRIVES , THE ENGINE IS FRESH SHORT BLOCK WITH EDELBROCK INTAKE AND CARB , AND HEADERS WITH 3 INCH EXHAUST . NEW 3 CORE RADIATOR . NEW SS SPRINGS ( 002/003 ) THE BRAKES ARE MANUAL DRUM AND NEW INCLUDING...

I have a complete A body 4 speed setup with everything you need to do a 4 speed conversion on an A body , the trans is a standard 833 4 speed ( not an OD trans ) also included is a new hayes clutch and pressure plate , this is a small block setup and im asking $ 1800.00 or best offer . This is...

Im looking for a Big Block Lakewood bellhousing , it needs to be the one with the 2 starter positions, let me know what you have , thanks Jim

I whent to Maple Grave today for the Mopar meet sponsored by Mopar Action magazine . I was the first time i have attended this meet . I have to say they did a really good job with the car show and and the racing . If you have not ever been to this show try it next year you wont be disaponted ...

Set of 4 small bolt rally wheels ( local pickup only ) $ 300.00 NOS A body non rally dash gauges ( speedo head ,fuel,temp)$ 225.00 QA1, 8 way adjustable coil over shocks with 1750 lb springs $ 350.00 Edelbrock torker intake tm7 no cracks or striped holes $ 150.00...

1970 Cuda grille , this grille is in really nice cond and ready to use, it has one small expansion crack but no big deal. all the stainless trim is there and the park light assemblys also . Im asking $ 600.00 obo shipping included

Goodyear Eagle Gt tires , one pair of new never mounted tires , these are 235 60 15 white lettered , these tires are hard come by , these are nos and agreat find for your vintage Mopar , im asking 200.00 obo , these are located at zip code 08035 , south nj

1972 Duster rolling body , I bought this car to build a race car but other projects have taken over and i no longer have a use for it . The car has a really nice body clean quarters and mint front clip , floors have been repaired , i also have the following parts for the car , big bolt disc...

1972 Duster , originally a 6 cyl auto car , floors are rusty trunk is a little rusty but not bad at all , the outer body is really clean , the front clip is like new this car comes with bill of sale only no title , this would make a good race car candidate , asking 1500.00 obo the car resides...

Im looking for a pair of 340/340 heads , ( non magnum ) 202 valves would be nice but not required , PM me with what you have . Im in the philadelphia area so that would be a bonus if i could pick them up ,PM me with what you have thanks jim

Im listing a few more parts from the latest lot of stuff Schumacher poly loc motor mounts , these are just like soild mounts on not quite as harsh , they B and E body $ 75.00 these are $ (159.00 new and currently on back order at Schumacher) Shaker hood base for a 6 pack ( fiberglass )...

1972 Plymouth Duster , VL29c , the car has a nice body , but has rusty floors , no engine or trans , this would make a nice project or racecar .the car being offered with a bill of sale asking 1500.00 obo , you just dont see these cars with a clean body for this price , however i am a motivated...

Hi guys thank you for the interest in this listing , this engine is now SOLD thanks Dan

I need a 72 duster parts car , car must have a title so i can junk it after i cut off the needed parts . Im located in the Philadelphia area , thanks

SHAKER HOOD base plate for an e body , this is for a 340 or 440 6 pack that i used on my 70 Cuda , This part is ( fiberglass ? reproduction and in nice cond . It was on my car for 20 years and worked fine. asking 225.00

1970 340 short block , ( 340 1 11/20/69 )( block vin # OB248671) 030 10.5 to 1 pistons with new main & rod bearings also new rings . comes with windage try , stock oil pan and pickup, timing cover and balancer, angled oil filter adaptor , no cam or lifters . these blocks are hard to come by and...

For sale 1972 Duster ( no title ) , This a slant 6 auto ( no engine or trans ) the body on this car is reallt no, clean original quarters , nice doors and mint front fenders and hood , the have the usual rust but the outer body needs nothing but to be prepped and painted . The interior is...

Looking for a 426 hemi , preferably a complete motor , if you have something contact me , thanks jim

I have a several motors im sell in various states of completion 68 340 short block 10.5 pistons 30 over , steel crank10/10 , disassembled , included are nib main bearings, rod bearings, rings, timing chain asking $ 750.00 68 383 30 over with 10/10 steel crank new kb pistons 906 heads with...