Search results for query: *

  1. M

    Thermoquad 'beauty',

    when i first put my 440 dart together, i needed a carb, so went to junkyard and asked if they had any chrysler 4 barrels and they brought out the thermoquad 6568s and an old AVS..i bought the thermoquad. stuck it on and it ran very good. Later found out is was originally for the 1974 ford 460.
  2. M

    Thermoquad 'beauty',

    Looks like my 6568s with the electric choke
  3. M

    Thermoquad 'beauty',

    yes sir!
  4. M

    [SOLD] 67-72 V8 LH motor mount limiter plates

    VERY slick idea and good looking also!
  5. M

    Thermoquad

    well, this 9097s carb came factory with .143 secondaries..
  6. M

    Hellwig swaybar installed..

    never was happy with the cheesy instructions that came with it. They showed the L brackets up like i have them, so looks like the directions are backwards..?
  7. M

    Thermoquad

    Bewy, what size secondary jets would you run on a mild to mid built 440? I bought several small drill bits years ago for building thermoquads per demonsizzler instructions and lost my notes. I have 2 drills for the secondary jets, a .147 and a .154, not sure which one i used.
  8. M

    [WANTED] 9077S thermoquad plastic center section

    SG, i have that same carb but the main body is different, but i appreciate the offer
  9. M

    Help an idiot fix his carb

    Piles? I would have a blast at your house with piles of thermoquads! I dont know why i like these carbs so much..lol..
  10. M

    Hellwig swaybar installed..

    so, do you like the hellwig setup and did it make a big difference for you? I havent drove mine yet as its been icy.
  11. M

    Hellwig swaybar installed..

    when i rebuilt the front end, i was short one cotter key of the right size so i just stuck one side of that big one in there for the time being. Im glad you brought it up because i had totally forgotten about it.Now i will remember to pick one up that will fit.
  12. M

    Hellwig swaybar installed..

    I know, i have to find a smaller one that will fit both legs through the hole..
  13. M

    Thermoquad 'beauty',

    rebuilding my thermoquad and cleaned it up real nicely, but after it sits for a few days, that raw aluminum turns to this nasty dull white look. Wondering what you can put on the top plate to preserve the looks after cleaning it up? I tried clear coating my last one and the clear coat just...
  14. M

    Hellwig swaybar installed..

    I loosened the brackets all the way up and got them moved as much as they would go.
  15. M

    [WANTED] 9077S thermoquad plastic center section

    I am needing the plastic center section from a 9077s thermoquad, or will take the whole carb for a decent deal. Please message me. Thanks!
  16. M

    Hellwig swaybar installed..

    I got the Hellwig swaybar installed today on my '72 dart. all good except for on the drivers side, the washer on the link is up against the strut rod. Not sure why as everything is centered like it should be. The passenger side is not touching the strut rod like the drivers side is. Will this be...
  17. M

    Dyno results - Tquad vs Holley vs Qjet - tuning issue, too rich

    Another question, after cleaning the carb all up really nice, a few days later, the top plate starts looking like crap, really dull, what can we put on their to keep it looking nice like it does right after cleaning it up? I know bathroom cleaner with hydrochloric acid cleans it up real nice...
  18. M

    Dyno results - Tquad vs Holley vs Qjet - tuning issue, too rich

    I am still not sure where to find that brass restriction in the base palate. I dont think mine had it because i have never seen it and the one im currently building doesnt have it either. Anyone got a pic of where this is located on the baseplate?
  19. M

    Dyno results - Tquad vs Holley vs Qjet - tuning issue, too rich

    ok i see. Thanks! I love learning this stuff and learning the reasoning behind it all! Thats why i love this site!
  20. M

    Dyno results - Tquad vs Holley vs Qjet - tuning issue, too rich

    so your thinking the bypass holes in the choke tower should NOT be blocked off? also, on the 22 degree mixture screws, do you know why those are better to use than the others?
  21. M

    Dyno results - Tquad vs Holley vs Qjet - tuning issue, too rich

    I also run a thermoquad i built per demonsizzlers instruction. I remember saying that the 1975-79 thermoquads will have 2 small holes in the front inside choke wall that need to be blocked off and the mixture screws will have to be changed to the 22 degree style if they are the 12 degree style...
  22. M

    Thermoquad

    Im guessing my 440 makes around 450 HP currently and the thermoquad has no problem running it nicely. I modded it years ago with the direction of a guy who used to be the thermoquad guru on moparts. The things i remember are drilling the primary and secondary jet sizes out. Drilling the pump...
  23. M

    Question for Super Stock Thermoquad racers

    not to hijack this thread, but anyone know what size drill to drill the secondary spray bars for a mid build big block? I had all the specs saved in a folder years ago and now can not find them.
  24. M

    Help an idiot fix his carb

    Cool, i appreciate yalls help! Very thankful to have this site to come to!
  25. M

    Help an idiot fix his carb

    what i really want is an older, early 70's thermoquad with none of the emissions crap, and the 1 1/2 primaries to build up..Most started with a '6'..if any of you have one you would part with for a reasonable price, shoot me a message
  26. M

    Help an idiot fix his carb

    Im glad that hes still around then. I always get nervous when someone dissappears from these forums. Like i said, that guy wasnt sure about the whole retirement thing, just what he had heard..
  27. M

    Help an idiot fix his carb

    yup thats him. hes a good guy. someone on moparts said that he retired and sold all his thermoquad stuff to scott with harms automotive, but wasnt positive.
  28. M

    Help an idiot fix his carb

    I really appreciate that man! A little background, back 20 years ago i was deep into this when i built my dart. I started a job in the auto industry in 2005 and quickly lost interest in cars..lol..so my dart sat for the most part. well, my old spark ignited for mopars here lately so im back into...
  29. M

    Help an idiot fix his carb

    well man i sure appreciate this info! I was really upset because i thought you and trailbeast were upset at me..well, now i can finish the rebuild! Thanks again!
  30. M

    Help an idiot fix his carb

    Mine does have that screw..I thought it was only for the fast idle adjustment only? So its also for the regular idle? WTH..makes sense but what has me confused is i have another 9077s on the car now, same carb, only difference is it does also have the idle screw.. so i may be confusing the...
Back
Top