Search results for query: *

  1. InItSwingIt

    [WANTED] A833

    Looking for a servicable condition A body A833 (non OD) and smallblock bell housing in the bay area. (Or shipped through a seller that can be vouched for) Thanks.
  2. InItSwingIt

    STOLEN 66 DART HARDTOP

    Update: ******* FOUND IT. I put the word out with the local scumbags that i was "displeased" with my car going missing, and that if i found out who had it we were going to have a "discussion" about it. (I live on a remote10 acres plot in the woods, and own a backhoe) Short story long, earlier...
  3. InItSwingIt

    STOLEN 66 DART HARDTOP

    The 2 other social medias i use, and the CHP...still nada. Practically had to beg the CHP to come file a report. Guy checked a box that says "$500-$4000" for value, amd that kinds pissed me off... dude never even saw the car but apparently is qualified to say what its worth... im guessing if its...
  4. InItSwingIt

    STOLEN 66 DART HARDTOP

    Bump. For visability.
  5. InItSwingIt

    STOLEN 66 DART HARDTOP

    I dont really have pics of it. I just worked on it and drove it from time to time. It has a small crease in the driver side rocker. Black bench interior. It had a bunch of 73+ disk brake and V8 conversion parts in the trunk. It had SBP rally wheels. PS with man drums. All the trim, all the...
  6. InItSwingIt

    STOLEN 66 DART HARDTOP

    I saw that, i emailed the guy to see if he had any info. Thanks.
  7. InItSwingIt

    STOLEN 66 DART HARDTOP

    It used to be $81... my jeep is over $200. Welcome to commiefornia.
  8. InItSwingIt

    STOLEN 66 DART HARDTOP

    Current reg was in the glove box. I found one from 2018 tho.
  9. InItSwingIt

    STOLEN 66 DART HARDTOP

    I have to call in the AM. Like i said, when my pops bike got pinched they couldent care less. A stolen car around here is like litter in thier eyes. I appreceate the sentiment tho.
  10. InItSwingIt

    STOLEN 66 DART HARDTOP

    Maybe this link works
  11. InItSwingIt

    STOLEN 66 DART HARDTOP

    Im not a big interweb guy. Those are really the only two pics i have. My dads sportster got pinched from the same property last year and it was in 200 pieces by the time it was found. Fuckin meth heads.
  12. InItSwingIt

    STOLEN 66 DART HARDTOP

    Someone loaded my Dart onto a trailer and stole it last night. In the SF bay area, Santacruz mountians. Its a long shot, but if you see it clobber the guy for me. Its white/blk interior, 2 door no post, minir rust in rear wheel wells, good floors, good trunk, good sheetmetal all around. Its the...
  13. InItSwingIt

    18 spline A833

    So what could i realistically get for it if i went thru it, cleaned it up, and sold it? I like the idea of having the right parts that fit (shocker) but also havent seen any A body 833's anywhere near locally.
  14. InItSwingIt

    18 spline A833

    Right now i have a blown up smallblock 904 on the shelf... lol... and the goal has always been a 4sp. So for the same $ as another 904 i figured this 18 spline unit would do.
  15. InItSwingIt

    18 spline A833

    Awsome info, thank you! And I know its overkill, but hey, i wont break it.
  16. InItSwingIt

    18 spline A833

    Awsome! Thank you. Those look they will be valuable resources. The bellhousing clearance issue is the axact kind of thing i was looking to find out, its not a major issue, but much better to know about BEFORE hand.
  17. InItSwingIt

    18 spline A833

    Im foound an 18 spline A833 locally, its out of a Charger with a hemi. As far as i know the input bearing and retainer are different than the 23 spline units, as well as input shadt diameter, output shaft spline count, and internal differences i dont care about as it pertains to my next...
  18. InItSwingIt

    [WANTED] Early A 360 mounts

    Im looking for the conversion motor mounts for a 340/360 into am early A. Maybe you have a nearly new set on a shelf, maybe you have a set thats seen better days, maybe you only have the one side I really need. (I'm on the west coast in the bay area.)
  19. InItSwingIt

    7.25 auburn limited slip/sure grip diff.

    Tjere was a factory 7.25 sure grip, maybe thats what he has.
  20. InItSwingIt

    7.25 auburn limited slip/sure grip diff.

    New spools for those are also listed at below $500...
  21. InItSwingIt

    7.25 auburn limited slip/sure grip diff.

    Im no expert, but i thought the jeeps used an 8.25 or dana 30/35's... which is what i see listed on the current auburn website... im sure someone that knows more will chime in on this...
  22. InItSwingIt

    weird buzzing sound

    Let us know what it is when you figure it out... good luck
  23. InItSwingIt

    weird buzzing sound

    Closest diagram i found with a quick google says its fir a 73 duster... i bet someone on here has posted diagrams, has books, or knows off thier head what each one of those fuses are for...
  24. InItSwingIt

    weird buzzing sound

    Id pull em one by one and see if it stops after each, then reference the wire diagram and see if that gives you a clue... just a jumping off point...
  25. InItSwingIt

    [WANTED] 1920 rebuilt/rebuildable

    I recently got a parts store reman 1920 because i needed to slap something on and move the car from where it has been parked. Needles to say its junk... its cracked by the mounting holes, the bowl leaks, and the idle mixture screw seems to do nothing. It looks like everything has been tightend...
  26. InItSwingIt

    New to magnum swaps - opportunity came to me - is it worth it

    Single plain and internal balance tells me either: A. It ran like garbage its whole life Or B. Theres more under the surface of this thing...
  27. InItSwingIt

    Welded 7.25

    My old boss has a CJ2A with a GT-350 code 289 and M-21 in it... hooked up to the stock jeep transfer case (T-18?)... he'd have two piles of em in the garage, one pile fresh from the junkyard and one pike that he'd blown up... each lasted about 2-3 months the way he drives... lol...
  28. InItSwingIt

    Welded 7.25

    Hah, yea well... what they dont know, wont cost you! Im just trying to have fun with the slant, and maybe have it live a short while behind a mild 360... i dont have high hopes for it after that tho...
  29. InItSwingIt

    Welded 7.25

    I like this awnser best... 66 dart = light... its got a slant = wayyy less than 300hp, lol... 904 = sloshbox...
  30. InItSwingIt

    Welded 7.25

    I never opend up a 7.25 before... i didint realized it was a C clip deal... that kinda blows... i might still do it anyways...
Back
Top