Search results for query: *

Good Day, I am having a fuel issue and not sure what to check next. After driving about 45-60 mins the car stalls and my filter is dry. I have the 5/16 line from tank to pump then i had 3/8 to the carb. I have switched to 5/16 all the way, replaced the pump, blew air from the tank going forward...

Looking for a set of steel wheels in the small bolt pattern 15x7 and 6's. Located in eastern washington

Good Day, i have a 67 dart with the small bolt pattern and brakes. I also have a newer, not sure of the year, 7 1/4 with the big brakes and bolt pattern that has been completely gone thru. It looks brand new. I would love to use my small pattern axels on the new one. Will they interchange? The...

I have a 440 marine intake and exhaust manifolds that im sure could use a good cleaning. Asking $50 or offer.

Looking for the small kickdown rod that goes to the trans lever on a 67 Dart w/slant six console shift. Not sure if there is a difference between console and column shifters. Thanks. Dean

I was cleaning out my AFB 400 and a small bearing came out of unknown. I checked the check valve and its still in there. Any ideas where this goes. The universal carter kit has one but it looks a bit bigger. No diagrams with the kit. Thanks for your help.

Finally got the other car seats in the 67 dart drivers electric pass not. Plus the old school relay. One for the seat one for the elect choke.

Still in the box wrapped with all the tags in the original plastic and box Offenhauser 4bb intake for a slant 6, also a holley 390 4bbl which was on my motor but not happy with holleys myself. It is in good cond but probably should be gone through, has elect choke. I had to bend the throttle...

Looking for a good cond edelbrock or carter version 500. Tired of the holley 390 need an upgrade.

Not sure where this goes but what happened to Leena that did powder coating. Its been a while since ive looked into this.

Hose issue resolved now on to wiring. The ground for the blower motor and the coiled wire in the box are together. Does each have to be grounded? I have the motor working but not sure what to do with the shorter ground. Is the coiled wire in the heater box a heater itself? Still on the 67 dart...

Where do we get the set of dash vent to heater box hoses. Looking at my old one im guessing its not a standard size. Its for a 67 dart no a/c

Looking for asset of copper dash vents and the hoses that go with.

Selling an Offenhauser Intake #5270 still in the original box and plastic bag. Still has the inspection tag and warning tag attached. Plus still has the adaptor on it. Only issue is the base gasket is cut. Also comes with the whatever kit that came with it not opened. No intake gasket included...

Anybody have a link or lead where to find the wiring for a trunk release. Thank you.

On my 67 dart my fuel and temp gauges have quit. Nothing has been changed since they were operational. Any help is greatly appreciated.

I have a set of 67 dart gt bucket seats for sale. Material and foams need replacing they are over 50 years old. Seats are complete and are the metallic copper color. Only thing missing are the mounting nuts for one seat, if I can find them there yours. Also the emblems are not included as I want...

Looking for a decent rear bumper for a 67 dart with no major dings or dents, something suitable for a daily driver that looks good or a recommendation for repairing my current one. Also looking for a dash frame to experiment with.

I have a 6? slant head that is gasket match ported and cleaned. Factory stamped over the last year number. Could use some minor detailing to finish or use as is. Comes with original valves, springs, retainers, keepers which are in very good cond. Also comes with engbldr big valves still in bags...

A set of pullies and a spacer from a 440 marine engine. Not sure if they would fit a b block or even practical for an auto engine but they are a pretty wild set. The big one is alum. Asking 40 plus shipping. Located in Eastern Washington.

For my 67 Dart I have a set of Mazda 2 seats and have an opportunity to get a very nice set of honda ep3(?) or jetta power seats. All of these measure about 16" wide which puts the rails on the ridge near the door. Has anyone fabed their own brackets or mounts that might work for this. The jetta...

Looking for a radio/heater bezel that's one piece for my 67 dart with the round radio knobs. All my nubs on the back are broke. Appearance not to important as I'm going to paint it.

Looking for one of these for my 67 dart with the mounting tabs on the back. I have some arm rest bases, pads ,and a couple marker lights I would trade.

looking for headrest assemblies for a 67 dart buckets.

So I did a search and couldn't find any help. What years of bucket seats will fit in a 67 dart. Im wanting to change from the low back to a high back seat. Thanks for any assistance.

Is there a diagram for how the cables are routed available. I had color coded them when removed but they are being a pain to put back. I have a bracket for one but forget where it was attached. Thanks for any help.

Looking for the plate/bracket that holds heater core to firewall on a 67 dart.

I did the front disc swap a while ago and am now getting to the master cyl. This is the one called for to replace the all drum. So far the only positive is it bolts up. Do I need to replace the plunger? Is this even going to work. Ive had it on the shelf for a while so no returning it. Second is...

I'm looking for a throttle cable for my 67 Dart 27-29" or longer is ok.

So I have almost all the carpet out and want to seal the pan. Things don't look to bad so I'm wondering how important is it to follow all the steps for the por15 process? Also if you have to rinse things with water how do you do it without making a watery mess? One more item, I would like to...