Search results for query: *

Just wondering if anyone has installed an HEI distributor, if so what did you do to correct the tach from bouncing all over the place. I bought a filter wired it in as per instructions and it didn't work. Looking for some input. Thanks

Going to be installing a hydraulic roller cam and just wondering who makes the best bronze push rod for the fuel pump. I was reading some of the reviews on the push rod from comp cams and the reviews were not good many guys had the rod fail while breaking in their engine.

I have for sale a Edelbrock 800 AVS-2 Part Number 1913 electric Choke. Had the carb on less than 4 weeks, to much Carb for my engine. Carb is in it original box for shipping which I will pay. $385.00 I take Paypal.

Just wondering if anyone has tried the Lucas oil power steering stop leak. My seals have started to leak and I was wondering if anyone has tried this Lucas Product.

What are the pros and cons of running the Mopar P-3690732 constant voltage regulator on a street car with the Mopar electronic ignition, I heard without it running the electronic ignition you could burn out the control box then I heard you could boil your battery. Mopar claims race only, has...

I know this is the A Body forum but maybe someone ran into the same issue,Posting for a buddy of mine, 67 Charger with the original factory installed 440 with automatic. Solid lifter cam nothing crazy Holley street dominator intake, 850 Holley carb, stock exhaust manifolds with 3:91 gears. The...

For sale is my Edelbrock 1407 Performer 750 ( with optional electric choke ). Carb is in excellent condition. $275.00 including shipping to lower states only. I accept Paypal.

I have for sale 2 never used still in the box 7" Amber angel halo Low beam High beam headlights. No modifications needed they fit right into the headlight bucket. They can be wired to use as day time running lights, turn signals or wired to come on with the head lights.$65.00 will ship to lower...

I have for sale 2 new never used tranny lines. These are the longer tranny lines that run to the back of the tranny. $30 will ship to the lower states.

I have for sale a set of 3:91 gears for a 8 3/4 axle with the 489 case. These gears have less than 200 miles on them. Will ship to lower states. $175.00

I have for sale in very good condition a set of 340 valve covers off a 68 Dart GTS. $175 will ship to lower states.

Looking to buy a Edelbrock Performer RPM intake for a 383

Dodge Dart GTS. Numbers Matching Motor, Rearend and 727 tranny that was just completely rebuilt. The LS23P8B125 GTS was built September 8th 1967 at the Hamtramck Mich. Assembly Plant. Car has original Fender Tag and Build Sheet. Stock Block with X heads with a production date of 6/22/1967...

Dodge Dart GTS. That was Professionally Inspected. Numbers Matching Motor and 727 tranny that was just completely rebuilt. The LS23P8B125 GTS was built September 8th 1967 at the Hamtramck Mich. Assembly Plant. Car has original Fender Tag and Build Sheet. Stock Block with X heads with a...

Has anyone run both of these intakes on a 340 and which one performed the best ? Which one is the better one for a stock block 340 with ported X heads, Hughes engine cam with 518 lift and 224 duration, stock exhaust manifolds with 2 1/2 in TTI pipes and a Edelbrock 650 AVS 2

I have for sale or Trade a 1968 Dodge Dart GTS Numbers Matching Motor and Date correct 727 tranny that was just completely rebuilt. The LS23P8B125 GTS was built September 8th 1967 at the Hamtramck Mich. Assembly Plant Car has original Fender Tag and Build Sheet Stock Block with X heads with a...

Looking for a website to get a factory window sticker for my Dart

Was at a cruse in last week and a guy pulled in with a Valant Post car with halo head lights that matched the color of his car and they looked really good. Went over to talk to him about them and he couldn't give me any info on them as they were on the car when he bought it. Does anyone know if...

Is there a significant HP gain eliminating the stock exhaust manifolds and putting on a set of TTI shorty headers ? I already have installed the 2 1/2 inch TTI H pipe system on the car just wondering if it's worth the money to buy the TTI shorties

I'm looking to purchase a set of the Mopar performance Valve cover P5007611AB . These are the aluminum finned covers for a 340. Will the twist on breather cap P4529880 work on these covers and what grommet will I need to put into the other oil filler hole to put my PCV valve.

Anyone replace your stock harmonic balancer with a aftermarket one ? Who makes a good quality balancer around $300.00

I have 2 Legendary ( Scott Drake ) aluminum mag 500 LBP 15X7's with 4.25 backspacing and 2 BFG radial T/A's 235/70/15. The tires have less than 200 miles on them and the rims are less than a year old in like new condition. The 10 special lug nuts are included. Will deliver locally or buyer pays...

Will a 15X8 rim with 4 3/4" backspacing fit inside a stock 68 Dart rear wheel well. I do have superstock springs so she does sit a bit higher

Going to need a 727 tranny rebuild and want to replace the current valve body. Has anyone used any valve bodies and rebuild kits from Cope Racing Transmissions.

The Central New York Mopar Association will present our 30th Annual All Mopar Show on June 30th 2019 at the Longbranch Park in Liverpool New York Rain or Shine. Gates open at 8am judging at noon awards at 3. Food and drink available. All of our gate proceeds benefit the Burn Foundation of...

68 Dart GTS, LS23P8B125038 340 Automatic with Original Fender tag and Build sheet. Sunfire Yellow with a new Black vinyl top and Black interior and new headliner. Front bucket seats are in excellent condition with new foam and the rear seat is in excellent condition. Built September 8th, 1967 at...

I hate like hell to have to pull it all apart, does anyone know what the diameter is on the Damper ( harmonic balancer ) of a 68 340

If you have the clearance is it better to run a oil filter without the 90 degree adapter ? Will a shorty filter without a 90 degree adapter fit with stock exhaust manifolds and 2 1/2 inch TTI pipes.

Has anyone ordered replacement bucket seat foam from Classic industries. If so how was the quality of the foam and ease of installation.

Just wondering if anyone has had the same issue as me. I purchased a set of BFG Radial T/A's from Jeg's and the raised white letters are anything but white. They are a light brown color and I can't get them white. I have tried just about everything including a SOS pad with no luck. Any other...