Search results for query: *

  • Users: 70net440
  • Content: Threads
  • Order by date
  1. 7

    Moser a body axles

    Has anyone used the Moser a body axles for an 8 3/4? The part number is A30-CST-A4. Moser rep says the break drum register is 2.3”. Will these work with stock 10” drum breaks? Haven’t gotten a chance to pull a wheel/drum to get an exact measurement.
  2. 7

    Pan evac with fenderwells

    Anyone have pics of how you routed your pan evac hoses on a big block with fenderwell headers?
  3. 7

    Race car interior

    Cleaning up the interior of the old heap. Speaker box carpet is pretty good at hiding some of the ugly.
  4. 7

    26x8.00?

    Checked the date code on the 235/60r15 M/T drag radials that were on my 74 Dart when I got it a few years ago. August 2005. So, thinking about going with Hoosier 26x8.00 slicks. I have stock steel wheels, springs in the stock location, the inner fenders have been trimmed. I have a good inch...
  5. 7

    Bare Bonz review

    Finished up installing a Ron Francis Wiring Bare Bonz harness in my son's 70 Swinger. This is not a bashing of their product, simply what I had to do to make it work for a Mopar. This doesn't have the wires pre-wired into the fuse box. You make the connection to the accessary, then run the...
  6. 7

    Rallye dash ground?

    This may be a dumb question. Rewiring a 70 Dart Swinger with rallye dash. Does the cluster have a ground wire or does it get grounded through the mounting screws? The only ground I could find in the wiring diagram was on the voltage reducer for the fuel level gauge.
  7. 7

    Steering column

    Are any of you running an aftermarket race specific steering column? Maybe with a quick disconnect wheel? What brand and how is the install?
  8. 7

    727 year?

    Trying to figure out what year the 727 out of my race car is. I tried to look up the numbers but couldn't find anything. First number is: H2538334 second is:2949027. Thanks for any help.
  9. 7

    Dead short?

    My son tried to start his 70 Swinger today and got a huge ball of smoke from under the dash. Checking things out we found the ground wire that goes to the steering column was fried. Not melted insulation but, copper wire turned to ash fried. The key switch seemed a bit stiff to turn and...
  10. 7

    70 Swinger front tire?

    Anyone running 235/60r14 tires on the front of a 70 Dart Swinger. We need to put some new shoes on my son's car. Currently it has 225/60r14 on the front, but Goodrich T/A's are the only tires made in that size anymore. I don't have the car here to swap one of the rear 235/60r14 tires to the...
  11. 7

    Comp pushrod?

    Anyone have experience with Comp #7840 pushrods? Summit lists them at 9.315" which I think is a bit longer than stock. Would these work with hydraulic lifters and non-adjustable stock rockers on a 440?
  12. 7

    Ultradyne cam?

    Anyone use an Ultradyne #3038896 cam? Lift is 485in/507ex. Duration at .050 is 231/239. The car is a race only '74 Dart, 440/727/3:91 gears. Stock 213 heads with a Weiand single plane and Holley 750dp. About 3,000 stall with 235-60-15 M/T drag radials. Rpm through the lights is 5,600. The...
  13. 7

    340 3b548359

    The 340 out of my son's Dart doesn't match his car. So, we are putting a 360 in it. Full disclosure, this motor has seen better days. It is .060 over and got water in the oil after he overhauled it several years ago. We pulled the intake and found some bent pushrods. It has J heads on it...
  14. 7

    Coolant coming out of timing cover bolts?

    Pulled the power steering bracket off of my kid's 340 to transfer it to the 360 and had coolant come pouring out of both timing cover bolt holes. Are these holes normally wet? We had issues with coolant in the oil with this engine. Wondering if the block is toast.
  15. 7

    360 oil pan?

    Getting ready to switch out the truck pan for a car pan on the 360 we're putting in my son's Dart. Any tips or tricks to insure a leak free install?
  16. 7

    MSD stop bushings

    Does anyone make larger stop bushings for the pro billit distributors? I see FBO makes a kit of one 10* and one 14* for $35. That seems a bit steep but, I'm kind of a cheapskate. I thought I read somewhere on here a member was making them but a search doesn't show it.
  17. 7

    [SOLD] A-833 trans Nor-Cal

    http://medford.craigslist.org/pts/4169731404.html Couldn't get pics to load up here. 68 up A-body A833. No vin stamped on id pad. Internals look to be in good shape. Local pickup only. I am in Nor-Cal near Oregon border. $350 cash only.
  18. 7

    73 front clip?

    Are the front fenders and hood from a '73 Dart Sport the same as a 70 Swinger?
  19. 7

    Taurus fan?

    Can anyone post pics of your Taurus fan install? Also, what size of relay are you using?
  20. 7

    360 swap?

    Picked up a 76 motor home 360/727 combo for my son's 70 swinger. Wondering what will need to be done to swap it for the 340/727 combo currently in the car. I know we will have to get a 360 pan, but will we need to get a new pick-up also? Read on here the air ports on the heads will need to be...
  21. 7

    Intermittant starting line bog

    Had my car(74 Dart 440/727/3.91 w/spool gutted interior sub-frame connectors 8 pt. roll cage) out twice at two differant tracks with the new motor.(Specs below) First pass off the trailer I've run 12.98 and 13.0 at 105 mph both runs. The car pulls hard through the lights at about 5600 rpm...
  22. 7

    Bellhousing I.D.

    I have an aluminum bellhousing. It appears to be small block, with a bearing retainer hole just larger than 5". It has a window at the top for checking timing. The only number I could find on it was 4202508-1 which I haven't been able to find anywhere on any web sites. Wondering if it might...
  23. 7

    4sp. I.D.

    I have a strange one here. I believe it is an A-body 4 speed. The I.D. pad has no numbers at all on it. The casting number on the main case is C99129-H. The tail housing number is C99126-2. The number on the front bearing retainer is 94798. There are three small tags attached to it with...
  24. 7

    Which 360?

    Looking for a donor for my son's 70 Swinger. Spotted a couple at a local wrecking yard. one has casting number 3418496 the other looks like 1008830-360-1(had to stick my phone down in the engine campartment to get a picture because it's still in the motorhome) I think I decoded them to be one...
  25. 7

    Wheel stud knurle?

    Putting longer studs on my '74 Dart bracket car. I have Mr. Gasket part #4311 which have an advertised knurle of .620" I measured them and got about .615" The old studs measure about .045" smaller. I believe these are the original front disc brakes for the car, they are LBP. The...
  26. 7

    Door handle clips?

    Does anyone make the clips that hold the rod that goes from the outside door handle down to the inside mechanism?
  27. 7

    High RPM miss

    I'll try to keep this as short as possible. 74 Dart bracket only car. 440/727 I am having popping through the exhaust at about 3,000 rpm that turns into severe backfire at 4,000. I have replaced all of the factory wiring except for the lights. I have a factory electronic dist., MSD model...
  28. 7

    distributor wiring?

    While I was trying to carefully unplug all of the original wiring in my bracket car I cut both wires to my electronic distributor. I have an older MSD-6 box and am using a painless switch panel. I assume one of the wires goes to the MSD, but it is so old MSD doesn't show a wiring harness for...
  29. 7

    Painless switch panel?

    Has anyone used a Painless switch panel to wire up a drag race car? Thinking about using the #50302 6 switch panel. How much of the original wiring did you keep? I'm thinking neutral safety switch and starter relay can stay, otherwise eliminate all of the 38 year old wiring from the car...
  30. 7

    Hemi Dart rear fender?

    Has anyone tried cutting out the rear fenders on a '74 Dart like the 68 Hurst hemi Darts had? I talked to a guy that had done the cutout on a '68 and it looked like it might be easier to do than a mini tub. I just don't know what it might look on a '74. The body lines are a bit different...
Back
Top