Search results for query: *

  • Users: VSTwister
  • Content: Threads
  • Order by date
  1. VSTwister

    [SOLD] 70-72 Duster / Scamp - lower grille support

    Has a slight pushed in bend on the one side, and middle brace needs flattened out. See last photo where identified for these. $100 plus shipping.
  2. VSTwister

    Rear end shock plate differences in hardware

    Will the conical washers and nuts from 7.25 shock plates fit 8.75 shock plates? Are they the same? If not, where can I get 4 washers and 2 nuts for 8.75 shock plates? Thanks!
  3. VSTwister

    [FOR SALE] 70-72 Duster / Scamp Fenders

    Came off a 71 Scamp. Driver side is not pretty, badly rusted at the inside fender lip but comes with a patch piece from a 72 Dart, and has rust and filler in lower rear area behind the wheel opening. Passenger side much better shape, just a little filler in the lower rear area behind the wheel...
  4. VSTwister

    [FOR SALE] 72 Dart rocker molding and clips

    Driver side molding only, but comes with 12 clips. I mainly bought for the clips for a Scamp, but they are different so wouldn't work for me. See photos for condition, I took close ups of the worst flaws I saw. Needs cleaned up and would be ok for driver. $30 plus shipping for all.
  5. VSTwister

    [FOR SALE] 72 Dart Fender Patch - lower rear driver side

    I bought this a while back thinking it was the same for Scamp. Obviously it is not. Pretty solid but looks like it has had a little bit of filler in the one lower corner? (See close up photos.) Also bottom mounting flanges are bent up but solid enough to flatten back out. AMD charges $149.99 for...
  6. VSTwister

    [Found!] 70-72 Duster or 71-72 Scamp lower grille support

    Need a good replacement to the one in the photo. It's got a bow in the right side that body guy can't straighten. Thanks!
  7. VSTwister

    Color for Radiator support & areas behind grille on 71 Scamp

    I've seen this asked many times before, but many of the old posts don't have photos anymore, and those that do are mostly for Barracudas. If you look at my avatar photo, you'll see my car is all purple. This is how it came factory. I never really noticed the color behind the grill much but then...
  8. VSTwister

    Duster Twister ladder hood graphics placement

    I just got a stencil kit. I see no dimensions anywhere. How do you know where to place the stripes in the correct accurate positions? What am I missing? Thanks
  9. VSTwister

    Rear frame rail suppliers?

    My frame shop needs a replacement driver side rear frame rail, just the front section really, but would like it with the front leaf spring mount/ bracket as well. I guess AMD only sells the full frame rails, no spring mount. I either need a donor car piece or another supplier maybe. US car tool?
  10. VSTwister

    [Found!] Driver left side rear frame rail with leaf spring front bracket

    Need it asap for my body shop repairs going on right now. 71 scamp. Thanks!
  11. VSTwister

    Car finally off to body shop!

    I need to set up a my garage here...in my spare time... Yesterday was the day. My Scamp was transported to the body shop. Any suggestions/advice from others who've done this before me are appreciated. My body guy seems to care, I'm meeting him again tomorrow to go over all my concerns, what...
  12. VSTwister

    Best fuel / ECS system to use?

    I've been going round and round with this, and still not sure what's the best path to take. 67-70 system, non ECS, vented to atmosphere 71 - crazy ECS setup with four gas tank "vent lines" 72-up - simplest setup, single gas tank "vent line" Since my car is going to the body shop tomorrow, I...
  13. VSTwister

    New classic car style bench seats?

    Who makes some classic car looking bench seats that have modern built comfort? I would look into keeping a bench seat if the style procar 90 scat buckets existed in a bolstered bench seat version. TMI products makes a line of universal fit bolstered bench seats, but I don't care for the look and...
  14. VSTwister

    [WANTED] Auto floor console setup

    Looking for an auto floor console, shifter and linkage complete. Thanks!
  15. VSTwister

    [WANTED] rocker trim and clips for 71 scamp

    I believe 71-72 years are interchangeable. These are just like the Duster trim except 3" longer. (I'd accept Duster trim too maybe, if the right price, but obviously would prefer the longer Scamp ones.) Need both plastic clips and the two metal ones that go on the front. Thanks!
  16. VSTwister

    904 vs 727 auto floor linkage

    I'm looking into converting auto column to auto floor with OEM center console, and trying to make sure this will work before I take the plunge. This has been discussed before, but the old threads I've found have photos gone and I've not seen positive confirmation on this exactly: Was the OEM...
  17. VSTwister

    [Found!] 70-71 Dart bumblebee stripe stencil/template

    Does anyone have one of these or make them? My painter will just paint on (the entire car will be getting painted) and so I don't need the decal. Or, if someone has a decal at a reasonable price...let me know! Thanks
  18. VSTwister

    71 Duster/ Scamp rocker panel trim questions

    Because the Scamp trim is tough to find, I'm planning to use the Duster/4 door Valiant trim available through Year One (I know that they are about 3" short, but will still work). But how does it attach? I know it uses plastic clips except for the very front ones. These are also not available but...
  19. VSTwister

    [Found!] 71 Scamp AMD Parts

    Looking to buy AMD parts as listed in attached, for a 71 Scamp. Where are the best places to find deals? Looking to save as much $$$ as possible.
  20. VSTwister

    [Found!] 71 Scamp Parts

    Looking for parts for 71 scamp. 71 gas cap Rocker molding trim and clips Lower radiator support brace with fasteners Driver side fender both outer and inner Twin scoops and related parts Thanks!
  21. VSTwister

    Side Glass Removal

    So what's the best way to take apart side glass windows, vents, door locks, etc? Because this is an area that's hard to see what you're doing or looking at, I don't want to find myself scratching my head when it comes time to reassemble. 71 Scamp. The factory manuals appear they would be a...
  22. VSTwister

    My 340 completed and dyno test run!

    Thanks to all those who gave advice and pointers on my engine build! After 3+ long years it's finally complete! And Video: https://youtu.be/VV4rKY79Oc8 Build details: '70 340 bored .040 over, 10.1:1 comp. Speed pro pistons L2316F cut for zero deck height Edelbrock rpm heads (closed...
  23. VSTwister

    Clutch SG that's seen abuse

    What do you think of this unit? Should I look for anything in particular? I was told the pinion nut came loose and the gear did this to the case, and was ran afterwards with no issues. I'm hoping it's just cosmetics to the case, as long as I don't see cracks in it or something like that.
  24. VSTwister

    Going rate for 70-71 Duster/Scamp fenders?

    I've found a pair of original front fenders for sale, somewhat close to me. They appear to be really clean and straight and the seller says they've been in storage for 20 years. I've not seen them in person yet just photos. Seller is firm on $500 for the pair. Seems a bit high to me. Is that...
  25. VSTwister

    Best older Dodge pickup for daily use?

    So I'm looking into the idea of getting another truck. My Dakota isn't going to last much longer (due to rust) and it's phyically too small for some hauling jobs. I want cheap but reliable and easy to work on. So I'm thinking 1st Gen Dodge Ram 100-150. Definite musts are: V8 8ft long bed...
  26. VSTwister

    Eddy RPM heads: Should I be concerned about this casting defect?

    I finally pulled the trigger and got the heads I wanted. Upon opening in excitement, I noticed this: See where the rocker arm shaft mounts in the arched recess? That can't be good, can it? Am I being overly worried, or is this a return/exchange situation? Thanks!
  27. VSTwister

    [Found!] Edelbrock SBM heads and intake

    I'm looking for a set of Edelbrock Performer RPM small block heads, must be closed chamber, not the original 340 style. Bare castings (#60769) or fully assembled, whatever you have. Also looking for an LD340 intake. Original casting intact for standard carb bore use. Email or PM. Thanks!
  28. VSTwister

    Forum For Sale Ads etiquette

    I have a question what to expect when it comes to sales ads in these forums. Normally I'm used to it like this: if there is something that several people want, and a "line" forms for the item being sold, the seller goes down the line giving each person who responded in order a chance. I replied...
  29. VSTwister

    Mystery pitman arm

    Figured I'd post this over here too... Anyone know what this pitman arm is for? I bought it on eBay years ago, advertised as a 68-72 a-body part, but it doesn't fit my '71 Scamp. It was too small for the steering box sector shaft.
  30. VSTwister

    [FOR SALE] 1970 /6 Dart - CL near Pittsburgh PA area

    Found this on Craigslist, figured I'd post it for someone who's looking: http://pittsburgh.craigslist.org/cto/3943917138.html
Back
Top