Search results for query: *

I have a new 904 yoke and a used 727 yoke. $50 +shipping each. Sorry don't know the part numbers of either.

So, last month I was able to locate a 46RH in Los Vegas for a great price! $400 but the guy wasn't interested in shipping so my buddy and I made the snap decision and bombed out to Vegas in the middle of the night! Needless to say we got the transmission and now I'm ready to tear it down and...

I'm looking into getting a set of Speedmaster flat tappet heads and I noticed that it mentions "oiling through rod". My question is would I just run a set of hollow magnum push rods? Also does the raised exhaust port (+.625) effect anything other than header location, like push rod length or...

How many of you are running a harness and ecu that requires the uses of the stock (from the doner car) brake switch? Any of you running an automatic transmission and do you have to press the brake to start the motor?

08 hemi 5.7 with 6.1 topend. Hotwire harness and Bouchillon performance ecu and sensors. I got crank, spark, and can hear the fuel pump prime, and throttle movement. But no start. Every once in a while I'll get a pop fire out the header. Alittle frustrated, not sure what to check.

I have a clean stripped 71 A904 case. That has damaged pump mount holes/ threads. FREE for pickup! In the OC area.

Looking for an empty A904 case. Don't need the tail housing or any of the internals. If you have one please hit me contact me with price and shipping to 92886. Thank you!

I have a 72 A904 behind a 318 in my daily driver. It was recently rebuilt and has been driving well with nothing out of the ordinary. Until yesterday my son and I were curzing and running errands and left a bit harder at a light than normal, and instead of a burn out we got slippage so I let...

I have small block 727 transmission for sale comes with 318 torque converter. Run and drives but does needs rebuild and front seal. asking $200 obo I can get you the casting numbers if needed. ** No shipping ** Pickup in Orange County area. Can deliver or meetup in local area if needed... for...

Hello, Looking for a Gear Vendor Overdrive unit for an A904 transmission. If you have one PLEASE contact me! Thank you.

Selling a new in box A904 26 spline slip yoke. I bought it with the intention of using it for my trans swap. Just looking to get my money out of it. Asking $69.00.. obo. plus shipping. Paypal U-Joint Series: 7260 Style: Inside Snap Ring U-Joint Cap Diameter (A): 1.078 Inch...

Looking for a cheap 904 rebuild kit. What ever you got laying around on your self in the garage. Gaskets, seals, steals, friction plates what eve... Or parts... Let me know what you got... post a pic and a price shipped to 92886. I'm offering PayPal and friendship - maybe more if ;-) Thanks...

Hello, Looking for a super clean lightly used blinker Lever for an Early A Or and all chrome lever from a 67 Valiant / Dart. If you have one please hit me up with cost + shipping to 92886 Thank you!

I'm getting ready to mount my rear bumper and I'm in need of what I'm guessing is a rubber vibration bumper. I've looked all over and can't find anything sold as a replacement or even a picture of what I'm looking for. If you have an info on them or where to get them please post up. Thank you. Mm

These are in pretty good shape but do show wear. Asking $100 +shipping

I'm in Yorba Linda ca 92886 Come get them. Trade for a large bottle of Jask Daniel's 15" on 5x4.5

Hello, Looking for a good working with nice chrome lever heater fan switch for 65 barracuda. Need price and shipping to 92886, paypal at the ready! Thanks

Looking for a loving home... NEED it GONE! $300 takes everything ( except oil pan and valve covers) I have a used 69 318 long block -less oil pan/valve covers. 3spd A230 w/ 30 spline tail shaft. Bell housing flywheel clutch and presure plate included I also have a 2bbl...

Chrysler 727 Torqueflite CNC Transmission Slip Yoke 1350 U Joint 30 Spline I bought this from summit and ended up not needing it. New out of the box never used or installed. Asking $70 + shipping. Summit link for reference Speedmaster PCE216.1023 Speedmaster Billet Steel Transmission Slip...

I have a 73 D100 with a 318 Daily driver ran fine then parked for a week. Tried starting it this week and no go. Turns out no spark at the plug, so I stat at the plugs and work my way back. I go through plugs, wires, rotor and cap, Elc pickup air gap is on the money @ .008 everything checks out...

Looking for a cam to put in my mild small block. This will be going into a truck motor in an D100 with 567 heads. if you have one let me know cost +plus shipping to 92886. Thanks! jeremy

I picked up a fresh rebuilt 72 318LA (hasn't been run since the build) from an estate sale. Pulled it apart and found the block had been bored .060 over 3.970" Block looks really good and seems to have been prepped well. I was planning on dropping a 390 stroker kit in this block and just...

Hello, I have 318 rotating assembly. .060 over Pistons, rods, crank and cam. All looks to be in good order but I don't need them Free to a good home, just drop off a bottle of Jack.... :p pickup only... SoCal

Hello, Just putting out feelers, looking to find 360 LA or Magnum. If you have one just sitting around not being used and just wasting space let me know. I'm looking to replace my worn out 318 and would prefer something that needs a rebuild and or basket build, or just parts you may need gone...

Looking for Working or not, lol ran when parked, basket case, "I don't know what its from". I don't care! show me what you got. Looking for something relativity close to the SoCal area. I don't mind driving just in need of a trans for a project. If it don't work or just parts I don't care...

So I've had one on order through Holley for the last 6months and doesn't look like I'll be seeing it any time soon!?! Holley 302-65 Holley Lower Structure Support for Gen III Hemi Engines and Transmissions While looking for parts for the 545RFE trans that I'm using I cam across the stock 4.7...

Looking for a local small block 727 on the cheap. Working or not... I'm in SoCal orange county area. Hit me up if you got one and need it gone! Thanks!

Seeking a low budget friendly single plane factory 273/ 318 manifold. Thanks. Pictures for reference.

Hello, I'm on the hunt for a under dash light assembly with lens. If you have one to sell please hit me up with cost and shipping to 92886. Thank you.

Seeking a stock tinted 65 barracuda quarter glass. I have one with pretty deep scratches and I'd like to find a good replacement. Looking for price +shipping to 92886. Paypal at the ready. Thank you!