Search results for query: *

Would like to find a drivers door panel in blue and in fair shape. Need for a 2 door sedan. Thanks

Morning, I have a 66 Dart wagon and need arm rests for front and rear. Also need a-piller trim both sides and the sill plates for just the front doors. Thanks

So I installed and new Comp Cams camshaft and lifters in my 408 Dart Sport last week. So I used the lifters in the kit. I tryed to pump them before install. But a few seemed weak so anyway had one completely collapsed yesterday and made an off sound. So question is what are you guys using for...

Anyone else have issues? I have a mild cam, j-head, 408 with 273 rockers. When I did the rockers I needed cup and ball push rods and bought a pack of harden Proform from Summit. So put a few hundred miles on them and started hearing a little tap tap so pulled the left side cover. I found that...

I'm selling to go with a more drag set up. Would like to sell locally. Pm me with any questions. 17 ARW muscle car wheels+tires I need 675.00 for everything, I'm located in Gettysburg, PA. 17325

So just curious if anybody knows of an option for the plastic t handle knob on the Turbo Action shifter. Is there anything out there? Thanks

So I found this in a box of Mopar parts. I have to check it again but its around 5.75 inches. The pulley on my 74 sport is over 6 inches but has double grooves. Kind of thinking about using it if it will work. My engine is a small block with a aluminum pump and just alternator.

Ok, Dart Sport 408, small valve jheads, air gap intake, Dougs headers, 484 lift/ 279 comp cam, 750 Edelbrock carb, Revinator box, 2500 Hughes converter, Cheetah valve body in 904, and 8.75 with 3.73 sure grip. So I built this car to mostly run to shows and work but wanted it to be fun at the...

So finally got to the race track today for the first time with my very mild 408 Dart Sport. I was hopeful that it would go maybe an 8.50 1/8th mile. I was very pleased with a 7.96 followed up with a 7.97. Not to bad for a small valve jhead and a 484 lift comp. cam. ADDED VIDEO A FEW POSTS DOWN...

The 74 dart isn't the prettiest thing ever but that being said as far as glass hoods go what do you think looks the best? I'm leaning towards the aar six pack hood. I guess the only others would be a cowl induction or hemi scoop. Post your pictures and opinions please. Thanks folks.

So simple question. I came across a pair of nice 1970 Duster fenders cheap. Other than the wheel opening and parking light will they work on a 1974 Dart Sport? Thanks

I have a 74 Sport with a mild 408 with a Edelbrock 750 carb. I just installed an electric fuel pump, my first one. I have a Holley blue pump and a Holley regulator. I hooked it up "dead head" no return line. I fired it up and everything works well. I set my pressure right at 6psi. The only...

Had an occasional no start latey. It a 74 small block Dart with factory harness. I turn the key and nothing. I can jump it at the relay no problem. Replaced the relay twice but have original neutral switch in the tranny. Whats a good way to check that and best place to get one thats not Chinese...

Nice pro touring wheel and tire package for sale or trade, no shipping. Ive got maybe 600 miles on them so far. Want to go back to a more drag setup. American Racing wheels, 17x7 and 17x8 5 on 4.5 bolt pattern. Fronts are 215/50/17 and rears are 245/45/17 Uniroyal Tiger Paw tires. $650 or...

So I just set up a nice set of 273 adjustable rockers on my 408 with j heads and 480 lift cam. I got new banana grove shafts and new push rods. Engine has a few hundred miles on it just wanted it sure up the valve train. So I fired it up and sounded great, then it started making noise. Kind of a...

so cleaning and getting ready to install a nice used set of adjustable rockers I picked up. While cleaning I noticed there are two different rockers (different numbers), is one intake and one exhaust or do I just have two different sets?

I found these old Edelbrock cast valve covers for my 408 Dart Sport. Glass beaded and painted with VHT wrinkle paint. Got some negative feed back from the older guys, what do you think of them?

So I have always run stock rockers but decided for my current build I wanted something a little more sturdy so I picked up this set from a member. I put one on the shaft just to see how everything looked. This is how they set on the valve tip. Not really liking it too much, could this be a...

So I've had a hand full of threads with the many minor problems Im having. Having issues with heat soak causing me to sometimes stumble and stall on wide open throttle. Also having low throttle cruise issue wit a lean miss that must be common with Edelbrock carbs. Also to top it off my trans...

Ok so I've been trying to get my mild 408 tuned since I completed the build. Everything but the valve covers is new. I had a wot problem which we determined was ignition issue. Worked on the timing and found the distributor was a little lose. I just installed a new distributor and Rev n nator...

So just to keep it simple I'm running a mild 408 in my Sport. It's 90% a street car that will see some weekend bracket racing. I'm currently running 323's in a 8.75 suregrip that's perfect for the street. The center is older and I was planing a rebuild soon. If I went to a 3.55 or at the lowest...

Hey fellows, having a minor problem here and there with a hot engine. It's only happened a couple times but is quite embarrassing to say the least. The other day I stopped at a buddy's for a half hour and went to leave. The car started fine backed out of the drive and started up the road, then I...

So I have a 74 Dart Sport that I have been working on. It's been a great project so far. Just more for fun maybe for real, I was thinking about if a 69 cuda front end swap would work or has been done before. The hoods are the same so I would think fenders and the nose would all but bolt up. I'm...

All new build 408. Having a mild crackle/miss at wot. Kind of like its a bit lean. The basics of the engine are mild, 484 lift cam matched springs in mild port j heads. Original ignition with orange box and msd coil. Edelbrock 750 vacuum sec. with electric choke. The car runs flawlessly except...

Ok so 74 dart small block all factory wiring, new alternator. At idle chargering around 13v. but when the rpms go up say over 2000, the voltage skipes up over 16v. Any ideas? Voltage regulator bad? Thanks.

I have a 74 Dart Sport that has the spool type crossmember. I bought a drive line loop that bolts to the crossmember but will only work with the earlier ones. Thanks.

So quick question, I have a 74 Dart Sport and was wondering which flip top fuel cap would fit my car. Im assuming the ones off the 67 to 69 Cuda's? Thanks.

So I bought a 74 Dart with a dual snorkel factory scoop mounted on it. I've decided its just not for me so up for sale it goes. Local pick up only. don't want to separate the hood and scoop but time will decide that. I need $400 firm. Any questions , just ask. Thanks.

So I have a Dart Sport that I've been working on. Just about road ready but no turn signal. Check the number 2 fuse and it fried. was going to switch out the relay and were is it? Found the one square one for the for ways. Not sure but I think it's missing and I don't know were the plug in is. I...

I have a 1974 Dart Sport that I got from a long time friend. I'm in the middle of the build right now and I'm trying to get the look that I want. It came with the popular 360 Dart scoop on it but I'm not in love with it. I think I just want a flat hood no scoop. So I'm looking for someone that...