Search results for query: *

Replacement master for 68 dart. Does this keeper stay on or is it just for shipping? Looks like it is to hold the piston in the MC. The master still fits flush against the firewall so there is no interference there. If it does stay, does it take the place of this style piston stop? Trying to...

We are working on my uncles 68 Dart. For now just trying to get it running and moving before we worry about what’s ‘correct’. My first question is can I use an alternator with 2 (I assume) field terminals when his car only has wiring for one (green.) I have that alternator and we are hoping to...

M63 melling pump. Came with an oil pan kit I bought, never installed. Only opened for pictures. Selling because I want to run the 63HV pump. These sell for around $100 new - asking $70 shipped to the continental 48.

These seem to be backordered everywhere. Wondering if anyone had an Edelbrock Victor 383 (2886) intake they wanted to sell.

I am looking for a 4 speed top for the early style console with the strip in the middle. I know they reproduce them but was curious if there were any original ones out there for sale.

Recently purchased and Only ran once (4 passes.) Going with a different combo so no longer need. Will include Moroso carb dust cover. $550 shipped anywhere in the U.S. 48. Holley 0-67200BK: Aluminum Track Warrior Carburetors 750 CFM - JEGS High Performance

Wondering what you guys have had luck with on your race cars. I love the looks of these proforms but they leaked almost immediately and it is getting worse. Time to try something different. Lots of companies sell similar versions of those fabbed aluminum ones but that’s a lot of $ to guess wrong...

*listing for a friend* located in central AR 468 Chevy, Brodix heads 9inch with 4.10 gears Delay box Transbrake Race Ready Asking $30,000 Msg me for contact info if interested

*listing for a friend* LS1, auto, t-tops, black interior, 68,500 miles. He’s asking $15,500. Msg me for contact info if interested.

The custom fabricated dash in my race car already has warning lights for water temp and oil pressure. I have decided they might as well be functional. I run mechanical gauges but I have found some relatively cheap ‘kits’ with senders and wiring to run the warning lights. My question is, where to...

Y1 Yellow originally. Frame solid. Trunk and floor solid except small hole in drivers footwell. Has running (non original) 71 model 340. Small bolt 8 3/4 rear and 4 piston KH disc in front. Needs body work and paint obviously but pretty well complete other than that. Comes with some new interior...

I know this is a shot in the dark - wondering if anyone has just a drivers side demon tail light lens. I’ve got a decent set but the drivers side is very faded so lights up orange compared to the red on the pass side. Having looked for a set in the past and knowing I probably will need another...

Wiring my Demon race car from scratch and would love some feedback or advice on my plans. I’m on a bit of a time crunch here so I need to get it right the first time if possible. Hoping a good plan will save some time and I can get right to work when I get it back from paint. I bought a painless...

The race car I bought recently does not have a proportioning valve for the brakes. Is this common? Does it need one? I haven’t had a chance to weigh it yet but it’s fairly light. 71 Demon. Fiberglass front cap, hood, deck, and doors. Lexan windows. 4 wheel disc. it does have line lock...

Hello all. I purchased a race car (71 Demon) and need to replace the windows and quarter windows. They are made from what seems to be a flat piece of plexiglass (?) trimmed into the shape of the stock windows. I see companies that offer formed lexan windows that are supposed to be the factory...

Anyone know what this type of pin clip is called and where I could find one? The keepers are broken on one and need replaced.

Was working fine when I pulled it to swap in a factory console and shifter. One spot of the coating on the cable wore through (see picture) but didn’t seem to affect operation. I *think* this is all the hardware I removed when I pulled it but I can’t promise. What you see is what you get. Spent...

I can’t find reproductions of this emblem, only the one like it with two posts on the back. Mine were stick ons. Anyone have one?

Just seeing what’s out there. These are reproduced but those are around $400. Thought I’d check and see if anyone had one here first. Not exactly sure on the years but it’s the one with the groove in the middle, not the later woodgrain ones.

71 Demon. Replaced the stock (standard) cluster with auto meter gauges. Now I am having turn signal issues that were not present before. With headlight switch off. Blinkers do work but are slooooowww. Indicator lights work at that same speed. Flashers and dash indicators work as they should...

Trying to decide between GPS and electronic sending unit for my new auto meter speedo. Those of you that use a GPS sender can you share a pic of where you mounted the sender on the dash? Center or side? Can it be tucked up near the dash pad? I know it has to have a clear view of the sky so I...

As pretty as the marbleing around his bezel is, I can’t imagine it’s factory ha. I assume originally it was something close to rattle can silver? Or was it shiny chrome- like plastic like around the radio bezel? Any pics of nice originals? Or any that have re-sprayed their own? If so what...

The bolt holding my prop valve to the frame will not tighten. The bolt looks fine so I assume the hole in the frame is stripped? Has anyone encountered this? If so what was the fix. Thanks.

After months of saving, research, and orders I am going to attempt a pretty big job over the long weekend. I do have a little help but we are down a man as my Dad has been in the hospital for a month and a half. 71 Demon. Replacing cheapo headers with a set of Doug’s. Switching from power...

My apologies if this has already been posted, but for those of us like myself who have been waiting for the autozone 20% discount to order a set of Doug’s headers, it’s live through the 20th. Edit: After reading it again, it looks like the 20% off is through the 25th, but the free shipping does...

Some of you may have seen my post about this a couple of months ago. 71 Demon. 340/727. 90% street driven but may take it to the track a couple of times a year just for fun. The brakes don’t seem to hold enough to do a burn out so I had thought about adding a line lock to help with that...

71 Demon. Have done the ‘73 disc brake swap including the disc brake master cylinder. It stops pretty well. I never drove it when it still had the drums so I can’t compare it to that, but it seems to stop just fine. Earlier this month when I was at the car show/bracket race I noticed the...

71 with the buscuit mounts. Rubber part split almost in two. Can this be (somewhat) easily changed with the engine still in the car? Just unbolt both sides from k member and try to lift engine enough to get to those bolts? It’s the passenger side mount if that matters. Thanks.

Will soon be attending a car show/bracket race event with my demon. Was at the same event last year but let my uncle drive the car. I run BFG 275/60R15 on the rear. Is it safe/smart to drop the pressure for the trips down the strip? It spun quite a bit last year but we lowered pressure each...

Yes, I know there are a ton of threads on here about this topic. I have read many of them. I was just curious about opinions for my specific setup. Also, I know many of you prefer/swear by Holleys, but I have decided to go Edelbrock. I am leaning toward the AVS 2 650. Just wanted to make sure...