Search results for query: *

$16,000.00 72 Dodge Dart Swinger ‘Special’ Front brakes upgraded to 15in Disc, includes all front-end parts to include A-frames, tie rods, ball joints, booster, lines, spacers, bushings, rotors, pads, an almost complete front-end replacement. New Steering gear box Front and Back Rims are...

72 Dodge Dart This is not a ‘perfect show car’ It is a personal upgrade/restoral father/son project. Photos of each item are available and restoral photos Front brakes upgraded to 15in Disc, includes all front-end parts to include A-frames, tie rods, ball joints, booster, lines, spacers...

I used the test listed below. Test 1 worked perfect. High Speed 100% Test 2 worked perfect as well running on slow speed. 100% Test 3 did not work. No movement/humming or attempting to park. I have swapped out the switch under the dash from the original to a recently purchased switch (I...

Cluster has never worked since I owned the vehicle. Have the cluster out.. replaced all the bulbs checked all connections.. tried running a quick 12v directly from battery to red and black post on input to cluster.. it acts like a short..if the cluster voltage control is bad, would that make...

Rubber or metal? The original bushing was rubber/plastic on my 72abody dart swinger. I have to replace it? Should I use metal or purchase another rubber/plastic locking bushing? MrMopar says 72abody used metal but my 72dart has rubber. Recommendations please.

Ash tray aluminum holder. Recommendations on better cleaning or should I paint it? I have soaked in White Vinegar/Water for 30 hours. Wire Brush and 000 steel wool. I would appreciate any recommendations or possible solutions. Thanks Olenavy72Dart

must have 4 pins.. 1 top and 3 in a row. Please let me know if you have one for sale. Thanks Olenavy72Dart Tampa

My 'Ole' 72 evidently was fitted with a hood that was not an original 72 dart hood. I would like any recommendation on what emblem will (must be mopar or dodge) fit the holes. If I can work some magic. I might have to remove the hood, have the holes filled in and repaint. Any...

1 of my rear lights is so corroded and rusty, it will not make contact with the bulb. I would like to change the bulb holders only. Anyone have a recommendation or course of action to keep the frame but replace the bulb holder and re-splice the wire connected to it? Thanks Olenavy72Dart

Looking for 1 or a pair of 'SPECIAL' emblems for a Canadian Built A Body 72 Dodge Dart Swinger.. Olenavy72 Tampa

I have searched high and low looking where to purchase a package of the small inserts that lock the emblems into the fenders on the (Swinger) emblem. Any know where to purchase them or other options? Thanks Olenavy72Dart

I have a new Tray and Jute with openings for Speakers. Does anyone know what the small square/rectangle openings were for originally? Maybe defroster vents?

72 Dart AC Vent. 2 of the 3 vents are salvageable, 1 is broken and all the vanes are broke or missing. I only need 1 if anyone has one for sale.

Anyone know where I can obtain 3 new bushings? Full Threaded bolt with built in rubber bushing for vibration dampening, I suppose. Has a nut on outside firewall and I dont know what was on the inside? Anyone know for sure? Jerry/Tampa

Complete front end replaced with disk brakes, hoses, plugs, wires, carb, aframes, brake lines, tie rods, even the steering gear box changed, mufflers, exhaust, shocks, licensed and insured. Just needs finishing. I have almost all the original chrome. Front end Aligned and I drive it sometimes...