Search results for query: *

  • Users: BooW
  • Order by date
  1. BooW

    Need pro advice Project X Block build Long term project.

    Hi , thx for all the input and answers good to know that i probably can leave the grooves :D What about oil control for maybe 7000 rpm. Whats the right way to go with? windage tray, HV oil pump , maybe better pan with baffles and larger tube for the pickup?. Take care
  2. BooW

    Need pro advice Project X Block build Long term project.

    in future i will order a custom converter :D, how is it to run a solid roller on the street, just about the maintence, i´m looking towards a bigger hydralic flat tappet.. ? hmm... just for the simplicity.
  3. BooW

    Need pro advice Project X Block build Long term project.

    Thx for input, didnt know that. good point there, this engine will be long term project, i´m seeking for the best knowledge out there. take care
  4. BooW

    Need pro advice Project X Block build Long term project.

    Hi thx for your input, Hmm seems good for the high winding power, is it any oil modifications need to been done the the block i´m thinking that cam going to min 7000rpm, that you said, maybe backdown a cam a bit. :D
  5. BooW

    Need pro advice Project X Block build Long term project.

    Hi guys come across a unused X block and some other parts here in Sweden, the only thing that has been done to it bored to std 340 and prepared for boost, the block has a O ring on top of the deck. 4 bolt mains ARP studs. I have used good (truck) forged crank that i´m planning to use and new...
  6. BooW

    Pushrod question.

    he was swedish , so thats why answer in swedish lang.. :D hahahahah
  7. BooW

    Pushrod question.

    Beskriv ljudet, vad har du för olja i? viskositet? vad är det för motor? topplock? geometrin för vipporna är väldigt viktigt också. Vad jag har läst mig till så är ju deras kamaxlar rätt aggressiva, tack vare designen på loberna. Jag vet att lyftarna i USA har haft kvalitets problem så att det...
  8. BooW

    What do you guys think of the speedmaster bare aluminum heads

    Hi mine flows better then a stock Edelbrock performer RPM head, they have a good 5 angle valve job. BooW
  9. BooW

    What do you guys think of the speedmaster bare aluminum heads

    Hey here you have mine. New in here need some advice SB 360 Cam selection See page 3 5 angle valvejob. BooW
  10. BooW

    Distributor Reluctor Orientation

    Hi usually there are marks of one side, the pictures are correct. maybe they have installed it upside down ?.. just my thought //BooW
  11. BooW

    Speedmaster/Procomp Heads - New combo kit???

    Hi there,here you have some Flow info of my heads and picture.... https://New in here need some advice SB 360 Cam selectionwww.forabodiesonly.com/mopar/threads/new-in-here-need-some-advice-sb-360-cam-selection.384223/page-3 Observe that these one Flow better then a pair of stock Rpm heads...
  12. BooW

    Speedmaster/Procomp Heads - New combo kit???

    Yes they are, but i did have some trouble with the helicoils some of them had a bad installation from factory and its LA style. //Rob
  13. BooW

    New in here need some advice SB 360 Cam selection

    Hi To be honest, i dont get that one? Irony:rolleyes:?
  14. BooW

    New in here need some advice SB 360 Cam selection

    Hi here is The Flow numbers from The vendor, it is a Superflow 450 bench Headers is already on. take care
  15. BooW

    35% off SpeedMaster

    Hey look here have just bought a pair of speedmaster heads LA New in here need some advice SB 360 Cam selection
  16. BooW

    New in here need some advice SB 360 Cam selection

    Hello guys my new heads are in the building now :thumbsup:. Here are some pics of them. The Heads are ProComp/SpeedMaster "Bare" has has 64cc chambers with Howard springs, Competition Products 21-4N valves, flows: intake :255,4 cfm at .500 lift and 250 at .450cfm Exhaust: 194cfm at .500 lift...
  17. BooW

    New in here need some advice SB 360 Cam selection

    Hi, sry for my short answer before, was not supposed to sound arrogant in anyway. yea understand that, good point there, as for what it is right now, i´m probably aiming for the straight line use. It seems when i floor it in 50 mph goes down to second gear its a raped ape. Its pretty fun :D...
  18. BooW

    New in here need some advice SB 360 Cam selection

    Hello, i have decided to go with the aluminum heads! :steering: The Machineshops labor/work are too expensive here in Sweden to get "J" heads in the right spot for a new camshaft. Scare the volvos at rally roads aint going to happend, i own Volvo s70 2.5t with slighty stiff chassi as a daily...
  19. BooW

    New in here need some advice SB 360 Cam selection

    Hi thx alot for your input, really good points, i was in that direction in my mind to, but i feels better to ask one more time and get me in the right direction. A little correction about the compression reading, at the time a did it, didnt see that it was 5 points between scale from...
  20. BooW

    New in here need some advice SB 360 Cam selection

    Hi thx alot for a fast reply, it is a 340 cam in it what i know, i have 15 hg in vacuum at idle at 800rpm and it runs really good at the higher rpms. The compression gauge was new! I have installed new valvesprings to. (Pac racing) hughes engine 1110 was a bit of difference from the stock 360...
  21. BooW

    New in here need some advice SB 360 Cam selection

    Hi there, alright with you?, i have did a compression test even with photos taken from some of the cylinders. It took some time but now its done :D Even got som headers on. See my last post Take care
  22. BooW

    New in here need some advice SB 360 Cam selection

    Hello guys long time no see, a litte update from last time, has been awhile. Headers is now on with full 2.5" exhaust with Apple Racing mufflers produced in norway design in Sweden:D was a big difference. Have som photos taken with inspectioncamera in some of the cylinders. stock piston or...
  23. BooW

    New in here need some advice SB 360 Cam selection

    Hi thanks a lot guys for all the response i get, You guys need to understand that the parts in Sweden are not that cheap like in the states and my wallet is not that thick so of course i´m limited. To buy a set of dougs or tti here in sweden, they go for around dougs (raw steel) 930 dollars and...
  24. BooW

    New in here need some advice SB 360 Cam selection

    Thanks again for all replys and answers, is something on your mind just tell me. I want to learn new things //Rob
  25. BooW

    New in here need some advice SB 360 Cam selection

    Hi, Yea i do read alot , that you say seems to be just right, My toughts going for new gear maybe 3:71 max not steeper becouse the high rpm at Highway/innerstate use My shifting gonna see max 6000rpm New cam in future that duration at 0.50 Max/ around are 224 intake/ exhaust Max lift .500"...
  26. BooW

    New in here need some advice SB 360 Cam selection

    Hi thanks for the time you take, i'm not really there yet, i'm new at this, so it will take a time, but i will fix the Compr.... reading before i buy any camshaft, should i get readings with engine warmed up? Maybe dry and wet readings? Take care
  27. BooW

    New in here need some advice SB 360 Cam selection

    Hi again , greatly thanks for all the respond, but i´m still confused about the cam selection in the future for my setup the voodoo series seems to be good. camshaft that works with my setup. i have a hard time to get some answers from the lunati support, that is why i want to hear from...
  28. BooW

    New in here need some advice SB 360 Cam selection

    don't think that's a options because i often run on highways, i´m now 3000rpm range in 60mph thx anyway
  29. BooW

    New in here need some advice SB 360 Cam selection

    quench? dont really understand that meaning , something like a bottleneck, , or you mean to have a good balance between the parts in the engine :/
  30. BooW

    New in here need some advice SB 360 Cam selection

    hmm Ok, I will get new springs at the time i can find a better camshaft. Spring with damper max lift around .500" hughes(Pac racing) or MP springs
Back
Top