Search results for query: *

I have a 67 dart, PS, floor shift, steering column. And a 68 barracuda, manual steering, column shift, steering column I want to swap the manual steering shaft into the PS steering column. I have read the FSM, seems pretty straight forward. Any tips? I know I could get an adapter, or...

Looks like someone is making a functional replacement. Back-Up Light Switch Trip Pin for 1967-1968 Ply - Dodge - Chrys w/Column Shift | eBay

Taking off some stubborn nuts off of Dart #2, I decided I would rather preserve the bolt and sacrifice the nut. I went to Harbor Freight, they don't carry any nut splitter. Saw that Ace Hardware had a kit so over there I went. On the way I saw an O'Rileys auto parts so I figured I would give...

Hi all, I have the power steering gear and pump from a 1967 (11/66 build) Both should be considered cores Came off of a 67 dart with a original 273. It had a 68 318 engine at the time it was pulled so I don't know if the pump is 67 or 68. The there might be another bracket with an idler that...

I have a 68 318 2bbl Intake. Seems to be in decent shape. 2468960 50.00 OBO plus shipping

Some time back I was disassembling and cleaning the switches from my 67 Dart Convertible #2. All went well till I got to the wiper switch. Switch number 2820525, 2 speed with the resister on the back I successfully got the switch open without breaking anything, always a good thing, which...

Hi all, Another member is in need of heater control pins to replace his broken ones. I can have them made in Aluminum, but I need one to get measurements from. It can be broken as long as the pieces are there. The other member is going to try and get me dimensions but if anyone has a 67 up...

Hi all. After seeing what @soonercruiser had to go through to get proper backup light bulb holders for his chrome housings I thought I would see what I could come up with. First take (yes I know the tabs are backwards already fixed) After a couple hours if cad and 3 hours of printing...

I'm looking for @Skrame100 He loaned me a part and I want to return it to him. I looked through my PMs and finally found his handle but he has not been in FABO since 12/23. I have an address but want to be sure it's still the correct one. Thanks Dana

I do reverse engineering of parts the aftermarket does not. I would like to RE the mounting base for the A Body console tach. 67 up to (????) I have never had one in my hands so I don't know what parts would be needed to make a proper mount I suspect the plastic, the metal and perhaps the...

Hi all Since "Bump" only goes to people who have see the post I am reposting this to get more feedback. I am looking for people who have IBM Cards and have Region 12 AND Dealer Code 17000 Original post: IBM card data I'm also interested if anyone has the meaning (in plain english) of the...

Hi all I got my second 67 dart convert IBM card today. Unfortunately they could not identify the dealership It has a region code of 12 and a dealer code of 17000. It was last registered in Texas in 76. Anyone have the same on their IBM card and know the dealer and or region? Thanks

A friend is looking for 2 67 Dart backup light housings the ones that go in the bumper. Example Would prefer fully functional and good chrome. With the attaching screws and nuts The 4 corners tend to get bent from installation and over tightening. As long as they are not cracked or broken...

I was doing some parts book number search for a convertible top switch chrome bezel / nut for a 67 Dart Convertible. I discovered... Emergency Flasher Convertible Top Windshield washer All use the same part number 2580774 According to moparmall.com it's used 67 thru 71 It is reproduced...

FIRST.... Please please please I do not want to get into the pros and cons of dipping a car. My question is... Would it be better to dip the car then replace the bad sections. Or replace the bad sections then dip. Car... 67 convert Needs at minimum Driver's front foot well Pass...

I needed a 10" drum brake dust cap. In the process I got an education... I had one OEM Classic industries repo MP500302 Dorman 618-101 Dorman 13976 (618-100) -that the books said fit 67 Dart Left to right OEM, Classic Ind Repo, 618-101, 13976 The OEM has seen its share of hammer blows...

long story... Free just pay shipping (guessing in the 4.00 range) pm me if your interested ested But I have (update ,update ) 4 extra Dorman 618-101 dust caps that fit on A body 10" drum and disk brake hubs. OD 1.78" It is a bit shorter than the OEM or Classic Ind. I put one on my dart with...

I was looking for a bearing dust cover for my 10" drum brake Dart. I looked at Rock Auto and on Dorman's website and both sites say 618-100 (13976) is the correct cap. The specs show it is 1.6 OD Well when it got here from Rock Auto. You know it, it did not fit. Way too small. Maybe it fits...

A couple years ago I stumbled on a rocker trim clips for 64 Ford Galaxie. 67 Dart GT Rocker Trim Clip Substitute (this post has dimensions in it) It looked like the 67 GT rocker molding trim clips so I bought one. It measured almost identical. I lost track of the company I bought it from...

I pulled the cast (omg that's heavy) iron power steering gear out of the dart I'm working on. I'm putting an OEM (light as a feather) Aluminum manual gear box in. The bolts from the manual 68 box are 12 point and have a flat maybe conical washer. The 67 PS bolts are 6 point and have split...

Not mine.. No relation to me... Saw this on FB Market place. facebook.com/groups/mopargraveyard/permalink/3553805661510099/?mibextid=dXMIcH

This is NOT a for sale ad.... I'm just looking to get an idea of the value of these parts My latest dart is a factory AC car. I like to keep things simple so I'm converting it to heater only car. I'm not sure I will sell the AC components or just store them but I was wondering what the parts...

A friend is looking for a stock forged 340 crank (he does not want a forged 318 crank, I offered him one already) for manual trans (he could rework an automatic if need be) He has a cast crank that will need to be turned (it is currently 10 under from the factory) so he is thinking about...

Hi all, I recently bought a left and right hand rethreading die (not a thread tapping die but a thread restorer) They were in the $7.00 each range IIRC. I used them on lug studs that had been in the weather since 76. The lugs cleaned up so well that I can hand screw lug nuts on all the way to...

I need a minimum of 1 left hand front 10" drum lug stud. (Yes I know I could change them to right-hand but I'm an odd duck like a left handed lug stud) @pete peterson

Just had a thought... Mustang 1" disk drum master cylinders are plentiful. Has anyone tried swapping the guts from a mustang master into a Chrysler master? If they are both made by Bendix there is a pretty good chance the internal are the same?

I have a master cyl that was well sealed for 40 plus years. The inside of the reservoirs are not rusty but is kind of solid with dried brake fluid. Right now I'm just trying to get the crusty solid gunk out. Chemical thoughts

Thought I would toss this out there... I'm looking for a rear seat frame for 67 to 69 Dart Convertible (Barracuda convert MIGHT be the same frame? ) The seat back I have is very repairable. The bottom I have is mostly not there. So at a minimum I would need the rear seat bottom. Bare frame...

If I wanted to go from power steering to manual in my 67 Dart. Can I just swap out the steering shaft in the steering column? It's a floor shift automatic column. Disclaimer.... I know I can get an adapter. I know I could break the plastic lock pins in the steering shaft and lengthen the...

I pulled the hood hinges from my Rescue 67 Dart Convert. There was no hood on it so I don't know how well the hinges worked. After stripping the hinge pins seem really loose. Question... How tight should the hinge pin be?