Search results for query: *

  • Users: JoePole1
  • Content: Threads
  • Order by date
  1. JoePole1

    Anybody deal with East Coast Mopar in Newark NJ?

    Has anyone hear ever had dealings with East Coast Mopar in Newark NJ? The reason I ask is that I found them on Marketplace selling a modified and upgraded WC T5 transmission package specifically for SBM. They also do engine rebuilding and specialize in Mopars. I messaged the owner Fabio for...
  2. JoePole1

    Anyone use a borescope for cylinder inspection?

    I got a Rigid brand for Christmas and the picture is really nice however the camera is too large to get into my spark plug hole. I would like to be able to view the ridge and valves also. Checking on Amazon and they have dual camera and articulating camera. Looks promising. It's not going to be...
  3. JoePole1

    Remake of Vanishing point on youtoob.

    Always thought that this was a decent remake. Picture quality isn't the greatest but lots of MoPars and action.
  4. JoePole1

    Mopar Action subscription

    Mopar Action is offering a free sub to a friend if I add a year to my existing subscription. I'll pay it forward Mopar style to whoever responds first.
  5. JoePole1

    [SOLD] 46RH A518 OD Transmission. Pick up only 12538

    Hey Guys, I have a 46RH A500 transmission for sale. Pick up only in Hyde Park, NY. I may be able to help deliver within 100 miles. $250 Not sure of the year but it is a 93 - 95 out of a Dodge van. Stamped numbers are PK5211832821235870. Will need rebuild so it should be considered a core. No...
  6. JoePole1

    [SOLD] Speedo gears and Poly mount delivered to Carlisle Thursday/Friday only.

    Like the title says. Speedo gears. See pic. $15 each. Basically new Energy Suspension Poly transmission mount. 904 but should fit 727 also. $35 Thanks FABO.
  7. JoePole1

    [SOLD] Small block parts delivered to Carlisle Thursday Friday only

    Full set of .10 over rod bearings 360. $25 .030 set of 360 rings MINUS one top ring. $20 Windage tray. No hardware. SOLD
  8. JoePole1

    Mounting Thermoquad to air gap style intake. What adapter?

    I have a 75 850 TQ (larger secondary) that I would like to mount on dual plane square bore intake for my small block 360. Going to be a learning experience including the TQ rebuild. This is strictly a street engine. Hood clearance may be a factor with the tall manifold. For those who have done...
  9. JoePole1

    Any cruise-ins or car shows during Chattanooga Motorcar Festival

    Hey guys. The wife and I are visiting Chattanooga this weekend and the Chattanooga Motorcar Festival is going on. We have been seeing quite a few street cars driving around and wondering if there are any local shows going on. Thanks.
  10. JoePole1

    [SOLD] Delivered to Carlisle. B/E Body floor shift column for parts

    71-72 maybe others B/E body column for parts. Has mount. Can and wiring look good. No key or shaft. Delivered to Carlisle on Thursday or Friday with payment. Can also pick up at 12538 $35 Thanks FABO
  11. JoePole1

    [SOLD] Delivered to Carlisle. 5.7 Oil Pan and Gasket.

    Brand new factory replacement oil pan and gasket for 5.7. I purchased these for my 09 Ram 1500 but will fit many years and models. Check part number for application. $90 delivered to Carlisle with advance payment. Thanks FABO
  12. JoePole1

    [SOLD] Delivered to Carlisle. Header Collectors, Air cleaner, Tone ring, SB Rings

    I will deliver these parts to Carlisle on Thursday July 14 or Friday July 15 with pre payment or pick up at 12538. I take Paypal or cash. Thanks FABO Header collectors. SOLD. Small block rings .030. complete MINUS one top ring. $20 8.25 tone ring. New. $25 72 small block 2 barrel air cleaner...
  13. JoePole1

    [SOLD] For Sale delivered to Carlisle 3

    Delivered to Carlisle Thursday or Friday with payment. I take Paypal. Thanks From 4th gen 5.7 Ram 1500: 2 inch Leveling kit. $50 Wheel locks with 2 keys. $10 Oil pan and gasket. New genuine Mopar $90 P
  14. JoePole1

    [SOLD] For Sale delivered to Carlisle #2

    Delivered Thursday or Friday at the show with pre payment. I take paypal or cash. Thanks 360 std rod bearing set. $25 Speedo gears 904. $20 each. 72 body manual. Nice. $25 73? A body SB A/C dryer and lines. $25
  15. JoePole1

    [SOLD] For Sale delivered to Carlisle only

    I will deliver these parts to Carlisle on Thursday July 14 or Friday July 15 with pre payment. I take Paypal or cash. Header collectors $35 Small block rings .030. complete MINUS one top ring. $20 8.25 tone ring. New. $25 72 small block 2 barrel air cleaner with usable filter. Nice. $35
  16. JoePole1

    Fresh mill. Bad happenings? What to check for?

    Finally got my 5.9 in and fired up. 60lbs oil pressure, Runs good, sounds good but she got hot during shake down run. I had a coolant leak from one of the cam cover bolts (figures the one behind the water pump inlet) so figured I pissed out too much water during the test drive. I pull the pump...
  17. JoePole1

    904 starts in Reverse after re-install.

    Maybe not a simple linkage adjustment. Bear with me. Had my working 904 on my LA and swapped to my fresh Magnum. While it was out I replaced both shifter shaft seals. I did the seal swap from the top of the trans and the shaft did drop down into the trans and I was able to get it back up with a...
  18. JoePole1

    904 Kickdown linkage at transmission

    Hi. While adjusting my 360 Magnum to 904 kickdown linkage out of the car, it appears that the KD lever at the trans is not getting pushed rearward enough. My linkage is originally from a 318/904 2bbl arrangement and I previously had it on my LA360/904 combo. It never seemed to kick down a gear...
  19. JoePole1

    Are all 5.9 Magnum flex plates the same? 904 install issues.

    Hey guys. Having a bear of a time mating my 904 to my 5.9 magnum engine.When I bought the engine I did not get the flex plate with it so I bought a used one. When I installed it on to the back of the crank one of the holes did not line up and one was completely blocked. I tried rotating the...
  20. JoePole1

    Accessory mounting issues on new intake

    Hey guys. Ran into another issue while moving accessories and brackets from my LA with Performer onto my Magnum with Assault and looking for ideas. I am mounting my factory AC onto the intake and the bracket winds up directly over the outlet for the heater line. On my LA the heater line is on...
  21. JoePole1

    Torsion bar removal Blues. What happened here????

    After MUCH effort yesterday I got my engine, trans and K-Frame dropped as a unit. I said unit. The big issue was the passenger side torsion bar "stuck" in the lower control arm. The car is on a lift and I fully loosened both T-Bar adjusters. The driver's side came out easily. On the pass side I...
  22. JoePole1

    Magnum Oil pan/gasket fitment issues

    Working on buttoning up the bottom end on my 360 and having issues with the oil pan gasket and pan. When I dry fit the pan I am flat on the block. I have a one piece Magnum oil pan gasket and I understand that the front piece needs to be cut off and replaced with the LA style front at the timing...
  23. JoePole1

    Any tips for installing LA timing cover seal?

    Hey guys. My aluminium cover has the lip and seal installs from the inside. Having trouble getting the seal started. I do not have a seal installer that large so tried plastic hammer then block of wood. Afraid to bend the seal. Thinking I need to sand down the opening a bit. I know about...
  24. JoePole1

    Hood insulation Poll. Yes or no?

    I see both on internet pics, videos and at car cruises. On a non correct seasonal use street machine. Feel free to explain benefit of or detriment to. Thanks.
  25. JoePole1

    [SOLD] SBM Magnum Springs, Retainers and Keepers.

    Please read carefully. I purchased these components installed on a set of EQ heads. They were used in a Mopar Action Magazine Junkyard Magnum engine build series. The springs are Comp 26975-16 and have a few dyno runs on them. The retainers and keepers are factory 5.9 Magnum from a 2001 with...
  26. JoePole1

    [SOLD] 4th Gen RAM 5.7 oil pan and Gasket. Delivered to MoPars at the Valley.

    Brand new 5.7 factory Truck oil pan and full pan gasket. Fits 09-16? May fit other years and engines but check part numbers for applications. Will deliver to MoPars at the Valley 9/12/21 or local pick-up NY 12538. $90. Thanks.
  27. JoePole1

    [SOLD] Parts Delivered to MoPars at the Valley.

    Off my 72 318 car. Nice original condition two barrel air cleaner. Even has usable air filter. $35 Five blade fan. Excellent condition. $20 Header collectors. $25. Items too bulky to ship. Pick up in NY 12538 or I will deliver to MoPars at the Valley this Sunday 9/12/21. Thanks. .
  28. JoePole1

    [SOLD] Firecore 50 wires

    Bought theses at Carlisle. New SBM used for mock-up only but boot does not fit at distributor cap. Too small. Maybe for non electronic ignition? $40 plus $8 shipping continental US. Thanks
  29. JoePole1

    [SOLD] Assorted A Engine & misc parts.

    All prices plus shipping from 12538. Continental US only. I use Paypal plus fees and USPS flat rate where possible. Please PM me. Thanks Washer pump and windshield sprayer. From my 69 Dart. $20 SOLD Small block rod bearing full set. .010. $20 Alternator bracket. $15 SOLD Timing set. Federal...
  30. JoePole1

    [SOLD] 10 inch drum brakes complete.

    I removed these from my 72 and converted to disc. 100% complete. Backing plates, hardware, pads, drums. Zero issues. Bolt on and go. Will work on 8 1/4 and 8 3/4. Too heavy to ship. Can be picked up in NY 12538. Travelling to RI in early September if that helps. $80. Thanks
Back
Top