Search results for query: *

  • Users: Edsrt
  • Order by date
  1. Edsrt

    Pocono Road Course Video

    So will I , still have not decided whether to run the duster or the challenger
  2. Edsrt

    Pocono Road Course Video

    Not to often you see a Cuda convertible doing road racing.a bit more refining of your racing line and you could easily pick up some time. Nice seeing you again at the Blairstown car show
  3. Edsrt

    Tti engine mounts

    yes, i am using the stock trans cross member and mount.rite now I am using the a833 4 spd that has been in the car. Here are some pics when I modified the k frame and motor mount
  4. Edsrt

    Tti engine mounts

    Something to think about is modifying the right side motor mount pedistal . I moved mine back a few inches and shortened the engine side about 2 inches and now I have oil filter clearance without having to use a remote oil filter or cut isolators.even tho the isolator in the picture was cut from...
  5. Edsrt

    '70 Dart 392 Project; what direction?

    just wondering when you set up your fuel system how you plan to vent your tank? I have the same tank kit from cpp and was having issues with a fuel leak when the tank is full. I dropped the tank and added Indian shellac to all the screws and seals . Combined the two vent lines together and...
  6. Edsrt

    I need some schooling on Gen 3 Hemis differences. Power v Reliabilty v $$$ v Fitting into a '68 barracuda fastback

    Hey Johnny, I see you are running the sniper intake manifold on your n/a motors. Does this intake seem noisy like a ticky tinny noise when idling. If I put my hand on the top sheet metal it does quite down. Maybe it's just my combo, 2012 5.7 with 6.4 cam
  7. Edsrt

    '70 Dart 392 Project; what direction?

    As far as I know most Chrysler starters are interchangeable from slant 6 to 440 the bell housing makes the difference with flywheel size. I used the starter for 96 Dakota 5.2 on my 340 with a Lakewood bellhousing and 5.7 Hemi with same bellhousing
  8. Edsrt

    '70 Dart 392 Project; what direction?

    Cool project. Just a thought , you may want to want to upgrade to a Hurst competition plus over what looks like an Inland shifter. The Hurst has a tighter feel and has strong lever stops to keep excessive shift pressure off of sincros and shift forks. Also you can use many different shifter...
  9. Edsrt

    "Mopar 10 commandments"

    A100 front axle are hard to find
  10. Edsrt

    "Mopar 10 commandments"

    Thou shall not run a Ford 9 inch or a explorer rear. Dana 60 or 8 3/4 only
  11. Edsrt

    74 Dart 5.7 Hemi build.

    nice work,what issues are you having with you Megasquirt ? I have the gold box running a 12 5.7 with a 4spd .
  12. Edsrt

    '70 Dart 392 Project; what direction?

    I ended up using a hydraulic throw out bearing from American Drivetrain with a Center force dual friction clutch and Lakewood scatter shield. I tried to modify the Z bar but I still interfered with my TTI headers and did not work smoothly. I did have to machine about 0.090 of of the hydraulic...
  13. Edsrt

    TR6060 and TB suspension? Any info on the starter interference?

    that's why I still the a833 , although overdrive would be nice
  14. Edsrt

    TR6060 and TB suspension? Any info on the starter interference?

    I know that Hemi cars have starter on the right side and hemi trucks have it on the left side . I believe you can change the bell housing to a quick time scatter shield to switch the starter to the left side. Since the starters where always bolted to the transmission and not the block
  15. Edsrt

    2012 5.7 in 71 Demon, what VVT settings?

    I also went with the MS hemi gold box and harness from EFI source. The harness seam's to be made very well but did find the map sensor connector was wired backwards and gave me trouble getting it started. But after that it starts right up and the auto tune in Tuner studio worked quite well...
  16. Edsrt

    Milodon oil level

    Just wondering how much oil people are running with a Milodon oil pan. Right now I am running 5 quarts while breaking in the motor. The engine is a 2012 5.7 out of a ram and not using a oil filter relocation kit. I know the stock pan is 7 quarts, just worried about windage.
  17. Edsrt

    2012 5.7 in 71 Demon, what VVT settings?

    Have you tried turning off the vvt to see if the no start after shut down continues
  18. Edsrt

    Vvt lock or not

    I ordered these springs individually though the dealership I work for and they never canceled the order just kept postponing it. Plus I think the price on the kit was about 200 dollars and individually was just under 70 go figure
  19. Edsrt

    Vvt lock or not

    Yes I used the same retainers but I had to wait 5 months for those springs but for 70 dollars instead 500 worth it
  20. Edsrt

    2015 6.4 Hemi

    It seems that cams in 6.4 truck engine get wiped out due excessive idling since they are mostly in commercial vehicles. I recently picked up a 2018 6.4 core with a bad cam for 650 dollars (the core charge) the motor has about 100 k on it . Tore it down to inspect and the crank and...
  21. Edsrt

    Vvt lock or not

    Well after not working and then illness finally got the Hemi running in my Duster. Spending more money than I wanted to for Intake manifold,fuel system, hydraulic clutch, dash and engine wiring harness plus megasquirt Hemi gold box. Also waiting for the Mopar performance valve springs...
  22. Edsrt

    Hemi Alternator Wiring

    I am pretty sure that the two wires are not the same as the old alternator . One is a field wire and one is a sensing circuit for ecm control. My megasquirt instruction call for 1969 mechanical voltage regulator
  23. Edsrt

    67 Cuda Notchback Hell Cat Swap

    Yes I know, but the later truck engine mounts the compressor simular and have no p/s pump. I was just saying I was considering the same solution. Here's an updated pic of my belt setup. Had to relocate alternator to clear throttle body.
  24. Edsrt

    67 Cuda Notchback Hell Cat Swap

    Sorry text disappeared . I was thinking of doing the same thing but I ordered an a/c delete pulley from an older Hemi and just used pulley. The picture shows the mock up bracket. I have since made a heavier bracket with a strut going to the motor mount to keep it from flexing under load.
  25. Edsrt

    6.1 Hemi into 72 Demon March 2018

    doesn't the fuse block interfere with your high beam switch?
  26. Edsrt

    Hemi in to 69 Swinger, like to go manual

    The A833 will bolt up but you have to shorten the input shaft nearly 1 inch to fit
  27. Edsrt

    Show your 5x4 small bolt pattern wheels!

    Centerline Convo Pros 15 x3 up front 15 x8 in rear 5x4 bolt pattern
  28. Edsrt

    First test fit 5.7 truck engine

    I was wondering the same thing . So I borrowed the intake from my wife's 15 5.7. Grand Cherokee to see how it fit. As you can see the throttle body hits the alternator bracket . I forgot to try to reclock the throttle to see if it would clear but I did not want to have my wife's jeep apart for...
  29. Edsrt

    First test fit 5.7 truck engine

    I was looking into possibly modifying the 5.7 intake by pie cutting under throttle body to tilt it down. I have been researching plastic welding. I did find videos of people patching holes in LS manifold. I really don't want to change the whole front of the motor if I don't have to.
Back
Top