Search results for query: *

Title speaks for itself. What do y’all have laying around that you don’t need? Cash in hand; no BS.

Less than a year old, less than 20 miles of use. Changed direction on my build. $250, ground shipping included.

Help! Who has some nice side trim laying around that they are not going to use? I am looking for the 1969 "Custom" trim, or the 1970-1972 thin trim. Not looking for cheap, looking for NICE. *Picture is for an example, not my Dart*

Derale 16913 14” pusher fan - $149 at summit Flowkooler 1700 water pump - $129 at summit CFV Racing SCRL1WP Water pump pulley - $73 at CFV Derale 13935 15” flex fan - $48 at summit All parts have 5 hours of run time, if that. All of it works as they should. $400 new cost. I’ll ship it...

Cam card says it all. Designed for staggered rocker arms. Ex. 1.6 intake 1.5 exhaust. Gross lift on card was meant for my combo of 1.7/1.6 rockers. I paid $400 a few years ago, only taken out of the box for inspection. $200 buys it and I will ship it to you (48 state ground).

Who has some nice trim laying around that they are not going to use? I am looking for the 1969 "Custom" trim, or the 1970-1972 thin trim. Not looking for cheap, looking for NICE stuff.

Hey all, What water ya been running in your high HP street cars for cooling? Distilled? Purified?? Talk to me…

Long story short: What should be used to fill the side trim holes so that I can apply a 68 GTS stripe/decal?? Yes, the car is already painted. Yes, I should have thought about before paint, but I thought trim and clips would be easier and cheaper to find. Thoughts?? Thanks!

Title says it all. Very nice condition, no dings anywhere. $150 please, 48 state ground shipping included!

Rear wheels are custom built 15 x 8 with 5.5” back space. Very low use, no damage anywhere. Fronts are 15 x 6 with standard backspace. Brand new, never mounted. Center caps are 1970 light gray. 3 are still in the unopened boxes…just bought last week! 4.5” bolt pattern NO TRIM RINGS…...

Someone couldn’t start a convo with me and I can’t start one because I get the message that I’ve reached the limit of 15. Yet when I click on my convo button it says there aren’t any there. What’s up??!

Anyone run one of these on a street car?

Anyone in nor cal (I’m in Tracy) want a pair of 002/003 Super Stock Springs? They were on my Dart for several years, but never run. Bring me $100 ($127 ea new) and get them out of my way. Hand me another $150 and you get a pair of brand new MT Sportsman radials. 215/70/15 ($150 ea new).

Cam is a bit rowdy, but FUN to drive around town.

Headline says it all. 002/003 Super Stock springs, mounted up, never ran. Less than 1/2 the cost of new. $100 pick up in Tracy, CA. Want to meet me somewhere for the exchange, that can be discussed.

Auto meter tach and A/F meter plugged into the heat/ac fuse... Have a signal to both when key is the on position. Once car is running I lose the signal to both. But...heater fan still works. I ran a jumper wire from both direct to the battery and they work as they should. Could this be a...

For those of you using a moroso (or like) water pump on a small block... What brackets are you using for your alternator. Specifically a mini alternator. Thanks!

Hey all! I have a oem tank with a rear sump, therefore no metal gas line out of the sending unit. Therefore I cannot make use of a stock ground. What has everyone with the same scenario done to ground the tank? Or...is it even needed?? Thanks in advance!

Ordered it, was put on back order, forgot to cancel it and don’t need it now. Just arrived yesterday, so literally “brand new in the box”. I paid $118, they’re up to $123 and on back order again. Send me $75 and I’ll ship it to you! PayPal preferred. Thanks!

I’m going to have 2 pass side springs on both sides; 002 spring. Going to try to hook 600+ lb/ft of torque on a 275/60 drag radial. What shocks for a street/strip car? Go...

Has anyone ever mounted a battery (small light weight or otherwise) below the OE spot? Like down on the frame rail. Wish I had a pic, but I think you get the idea.

Let’s see them! Like this one...

My small block in my 69 dart has just enough engine set back to cause me grief. Lokar was out of stock until December so I bought a copy on eBay. Piece of crap it was! The Hughes steel version I bought previously was impossible to install. The tab for the trans bolt couldn’t slip over a stud...

Anyone run a lightweight battery in a street/strip car? Like the Odyssey 680, a Braille 17/18, or a Dyna-Batt?? Talk to me...

Small block 69 Dart. TTi headers... What inlet/outlet muffs are you using?? Center in and out? Center in/offset out??? I’ll have turn downs at the rear, but want to use the OE hanger location. Pics are a PLUS!!! Thanks in advance!

Anything anyone has to tell regarding the aftermarket dipstick tubes?? Like the pic shows. How do they seal compared the OE tube? Oring sure seems right vs. the seal that’s on these. Thanks!

Very brand new! Used for mock up only, not 1 foot on them, let alone 1 mile. $130 each new... $130 for the pair, you pay shipping. If you’re near Tracy, CA I can meet somewhere to do the deal. Thanks for looking!

Forgive me for such a question, but... What is the wrench size on this bolt?? 1 1/8” is too small, 1 1/4” is too big. I don’t have metrics that big, but it couldn’t be. Could it?? Thanks in advance.

Gently used Moroso #63565 water pump. 464 street miles; works as new. Asking $350 shipped ground.

Brand new, in the box. Only taken out for inspection...never even near a motor. See cam card pic for the details. ***Valve lift is idicated as a 1.7 intake and 1.6 rocker combo. .595"/.605” is the lift with a 1.5 rocker ratio*** I paid $450 a year ago. For $300, I’ll ship it to you free!