Search results for query: *

Sorry, it's standard an no Ac. I may have found one but I'm waiting to hear back. Thanks!

Thanks

Yeah everything is sold out right now. Thanks!

Yes

I don't have a picture of it just that part#.

Looking for original Radiator for 1968 Barracuda 340.

Looking for cooling fan part# 2863216 In good condition.

Let me see if I still have the box. I just installed a set on my 68 barracuda with the 7/16 lugs and the small bolt pattern. You just need to email Cass and he will hook you up.

Dr Diff

Thanks for the offer but I've already purchased one. Kenny

Looking for a good ready to bolt in 741 Sure Grip with 3:23 - 3:91 gears. Thanks , kenny

Jeff, the 2863213 is the original fan # but if that works well that's probably what I'll end up using. Thanks!

looking for cooling fan blade 2863213 for my 1968 barracuda formula s. also the original water pump pulley. it has no air or power steering. Thanks kenny

We haven't checked the preload and we are running stock lifters and rocker arms. What is the actual preload supposed to be? We have a shop manual I'm sure it's in there. Thanks guy's!

Thanks for the reply. We used the springs, retainers and keepers from the original head. Also checked everything you mentiond in your reply except valve length.

Thanks! I just reposted i didn't think it was posted.

Guy's i was wanting to know what the valve stem height above the keeper is supposed to be? Had to replace one head and the valve stem height is different on the original head. it 8 thousandths to 12 thousandths on the replacement x head and around 12 to 14 thousandths on the original head. We...

I was wanting to know if anyone new how many thousandths the valve stems should be above the keepers? I had to replace a cracked head that someone did a bad repair job on. Passenger side valve stems are around 14 thousandths and drivers head which I replaced is around 10 thousandths. I have one...

John, what do you want for them? Also how much for a single one? Thanks kenny

Does anyone have a set of x heads that are in good shape? Bought an all original 68 formula s and one of the x heads has a crack thats leaking on the outside but not internally. Thanks kenny

That's what I need! Thanks for sending me that.

Need the two ground wires that are separate from the actual harness. These are two black ground wires with blade connectors that attaches to parking light ant the other attaches to the core support. Thanks kenny

I'll do that thanks!

Looking for original fan part# 2863213 for my 1968 barracuda formula s.

They don't sit flush there's a 1/4 or so gap.

I'll try and gets some later. It seems that the original wheel has more of a lip where the bead of the tire sits against the rim.

5 1/2 is what I need. I have a set but there early 70's and when I put the original hubcaps on it leaves a gap around the wheel and hubcap. The older steel wheels seem to have a bigger lip on them that fills that gap.

Looking for 1965 0r 1966 formula s steel wheels there small bolt pattern. Thanks!

Looking for an original fan shroud for 1966 barracuda formula S with 22" radiator.

There still available I contacted him to see if he had the original fan shroud to either car and of course no luck!