Search results for query: *

Can anyone tell me what this pair of Mopar Dura Ride Shocks possibly fit Part # 4042177 Other numbers on the body are 4052177 63816 Maeco Made in The USA P1104822 Thank you in advance

This may be a dumb question, however, I want to install a Mopar mini starter on my 440 I noticed that one hole on the starter is bigger than the other. It appears that the starter could move in and out because of the bigger hole at one end.

Does anyone know where I can get my power brake booster rebuilt? Thank you in advance

i just finished rebuilding a 440 with a set 906 castings mild porting. The heads were milled about .005 to clean them up. The block was also mildly decked for cleanup as well. I am using a Hughes .530 .536 lift camshaft hydraulic flat tappet type. Can I use the stock rocker arm assembly? Any...

I have a Mopar Performance Electronic Tach drive distributor #3690201 for Big block R/B That has been on the shelf for a few years and have no need for it. Comes as seen in the pictures. $375.00 or Best shipped to your door USA Only

I received a basket case 440 a few months ago and have since rebuilt the short block. I am ready to install the flat tappet hydraulic cam and noticed that something is missing. What exactly goes behind the camshaft sprocket to center this so it will bolt up correctly? I am new to big-block...

I purchased a distributor at a swap meet a couple of months ago and was wondering if anyone could decode this a little more. I was thinking that this was a genuine Mopar OEM slant 6 and not an after-market. It seems like a quality unit with a heavy tan cap. It looks a little dirty, but they're...

I have a pair of 65 Dart GT 2 door interior door panel molding in good condition. I believe these are the bottom trim pieces that go on the door panel. They are 42 inches long and include the original clips. $30.00 for both includes USPS shipping in the USA only. Paypal add 3% or send as a friend.

I have the front and rear center Vinyl roof stainless moldings from a 65 Dodge Dart GT. They came from my old GT and have been in storage for many years. Both moldings are in excellent condition no dents or major scratches. $100 for both moldings shipped USPS priority mail in the USA only...

I have a nice pair of wheel lip molding that came off my 65 Dart GT and have been in storage for many years. They are in good condition I don't see any dents on the outside radius just a scrape on the inside on one of them and a minor dent. Screw holes are all intact. Good driver+ quality...

I have a pair ( right & Left ) of 65 Dart GT Stainless OEM quarter panel top moldings that are in good condition. The right molding has a small dent on the radius which can be removed with a little bodywork otherwise in very good condition. The left molding is very good with no dents. These are...

This is from a 65 Dart GT car I no longer have and have been stored on the shelf for many years. Selling as a complete set ( pictured ) The bezels have a few dents and will need some repair and cleaning to look good again. Please see the pictures for more details. $35.00 includes shipping in...

I know Chrysler has made the 9 1/4 rear ends for many years now are all the parts interchangeable from early models such as my 1977 to the later models like 2007? Such as gears, carriers, bearings etc... Thank you in advance

I was able to get a couple of nice Emblems on eBay. These used emblems came without the thread cutting Pal Nuts. I measured the studs with a dial indicator and got a reading of .133 What size pal nut do I need to attach these with 5/32? which is actually .1562 Thank you in advance

I have a vintage Edelbrock Street Master 440 Intake Manifold #3115 that has been sitting around for several years. I gave this a quick Glass Bead job to check for any issues. All bolt holes are in good condition, some pitting on the bottom of the intake near the center, but not an issue and...

I have a pair of Dart Demon Hood Scoop Trim Bezels that I received in a box from a trade. I do not see any part numbers on these, but they are in good condition. Please look at the photos and make sure they will fit your application. Bezels only no screws. $75.00 INCLUDES SHIPPING

I have a Small block Windage Tray that I removed from a 360. Comes with the tray, the 4 cap bolts and the 4 attachment bolts. $90 Includes shipping in the 48 USA mainland states.

I am replacing my intake gaskets on a 360 LA and there are some tabs that stick out from the head gaskets in all four corners. The Felpro gaskets have slits in them in the aprox locations as the head gaskets tabs. My question is ( since I did not get any instructions with them )do the tabs go...

Found these in the back of a dodge 77 Dodge truck I know they are Mopar. I did not see any numbers on them. can anyone give me an idea of what they would fit? Thank you in advance

I need 4 used main crankshaft cap bolts if you them laying around I would be glad to pay you for them. Just need them to finish up a spare motor. Just let me know how much shipped to Michigan 48049 Thank you

I have a 1977 440 with flat tappet hydraulic cam is there any oil out there off the shelve with the required ZDDP to run in this engine? If not what would be a safe conventional oil and what is a good additive that I could use that is readily available again off the shelve? Thank you in advance...

This 1972 Dart was purchased last fall in New Jersey I drove it home with no issues. It has a slant 6 225 automatic and the 7 1/4 rear-end all original. I have only driven it a few more times around town. My intensions were to put a 360 Magnum, 727 trans, and a 8 3/4 Posi rear in which I was...

This is a 360 Dodge Magnum motor, block was in great condition when I received it had it hot tanked, new brass freeze plugs, all threads cleaned and tapped, Cylinders were honed, new rings, new bearings, new oil pump, oil pan. Heads were magnafluxed to check for cracks, new valve job and. heads...

Anyone have a decent front grill that will fit a 74 Dodge D100 Pick up?

I have a 72 Dart with a slant motor was going to do a 360 magnum, but have since changed my mind. I am going to do a big block now, I was able to get a V8 K member will this still work with a big block or do I need to get one of the aftermarket setups? Thank you in advance

I have a nice Mopar Factory Super 6 Air Cleaner Preheat tube, came off a 1978 Aspen. $20.00 shipped.

I have a used, but in good condition slat 6 Factory electronic distributor came out of a 78 Aspen. If anybody needs this $25.00 FREE SHIPPING!

Does anyone have a 72 or maybe a 71 grill laying around I need to cut it up for parts. Thank you

I am looking at buying a 3 inch transmission oil pan for a 727 in a black steel that has a drain plug. I need a filter extension for a 3 inch pan as well. I see a lot of filter extensions, but they don't say what size pan they are for? anyone know where I can find one that doesn't cost more than...

I have a Slant Six 3 speed bell housing includes the flywheel cover from a 65 Dart #2868481 as seen in the pictures no cracks etc. Need to make room in my garage $15.00 plus shipping.