Search results for query: *

JB weld it-hone it-send it.

The hairspring sounds like the issue. I had a very small amount of knowledge about speedo operation. That would explain why the odo works but not the speedo. The question then is it preloaded with a set number of turns or tension? I guess I have to open it back up to see if it got damaged or...

So a brief description of the issues I am facing in getting my speedo working properly. First thing its an A903 3 speed behind a slant 6. The needle was broken off so I used a thin pin behind the needle and glued it in place. It worked after that but worked is a loose approximation-it bounced...

I always back into parking spots and taught my daughter to do the same. The wife-different matter! Its safer to back into a spot where there shouldn't be any vehicle or pedestrian traffic. And again safer to drive straight out into traffic with full forward visibility.

So reading through the posts a couple of things jump out. First the refund on RRSP contributions is based on a lot of factors including your marginal tax rate based on province of residence. If you are expecting a 50% refund you must be in a high tax bracket where your marginal tax rate is 50%...

Another video of the same crash. Warning-graphic.

My Wifes 2009 Jeep JK. Been her dream to own a Jeep instead of always getting the family hauler for her. And the heater core. If anyone knows about replacing the heater core In a JK you know how my Saturday went!

Thanks to #wilma got a complete drum to drum rear end. Now to compare three rear ends for two cars and see whats what.

Ha no wasn't pegged! On this trip the speedo started out about 20mph to low then after 90 minutes it started to howl and wrapped around to that point! I just unhooked the cable for the rest of the trip. That video was about 80 km/hr as per my cell phone app. Any higher in the revs and it would...

On the road trip this is right about where we pull over and refill the rad!

Empty your inbox.

Appreciate the offer. How much? And any idea what gear is in it?

Well I picked up another A-body (more on that later) and one of the rear drums has welded it to the brake pads and isn't coming off. We beat on it and my partner bent the heck out of the face of the drum and is cutting it off with a grinder. That being said we need a crappy brake drum ASAP just...

Chugging usually indicates a blockage in the exhaust system.

Ginger beef-Calgary mid 1970s

I disagree with the "great save"-at that speed he is just the meatsack along for the ride and holding on for dear life.

This is my more door 60 Valiant-will be up for sale but I am in Canada so a bit of a trek!

You all realize that this is a security question for a lot of websites and financial institutions right?

Thanks but I also don't think it would arrive in time. Working on an alternate route from Sweden.....

Looking for either a 19" wide (preferred) or 22" wide radiator for a 1960 Valiant slant 6. The catch is I am in need of it yesterday so I am hoping someone in Southern Alberta (Calgary?) has a leak free unit available. Also cheap as I am on a strict Great Beater Challenge budget so Pick n Pull...

First time out and about since 1985!

For the mechanical water temperature sensor there is a hex plug on the passenger side of the block near the oil filter. It takes a 3/8"-14 NPT fitting. I used that for my mechanical temp gauge.

I just started using that but have the larger tube. We will see if it lives up to the hype. So far seems good.

Welcome from another Calgarian!

[FOR SALE] - Direct-Drive Starter ('60-'61, plus other applications thru '71) FS

Go see Geoff at Shawnee Station Automotive. I use him for any work that is over my head. They work on a lot of old cars there-just check out their website! Shawnee Station Automotive – NAPA AUTOPRO

No dice on a replacement but since I was able to put it back together it has been flawless in the limited times I have fired things up. There is a wreckers in Alberta near Tilley AB that has a yard full of old Mopars that may have a used one. Auto Wreckers Tilley | Home | Flatla Auto Wrecking...

Dewey Oxburger (John Candy) in Stripes!

Two people I don't trust-a fat doctor and a skinny chef.

So if you buy something sight unseen and it turns out to be way better or more valuable than was originally represented do you go back to the seller and offer more money than you paid?