Search results for query: *

  1. chrispy1971gtx

    292H Comp Cam, reusable?? How to tell.

    Pulling apart a 73-340 I got off craigslist cheap. I had been sitting in a barn for several years and was told they had it in a van at one time. Which must have been true since it had van motor mounts and oil pan. So good and bad news. When tearing it down, I found .060 2316 pistons, j-heads...
  2. chrispy1971gtx

    W2 rocker arms.

    I was browsing ebay looking for some replacement W2 rocker arms and noticed that the rights have the oil hole omitted. Is this typical of them all? My set are the econo-unbushed versions and appeared to all be drilled for oiling. Only difference in the ones listed are the bushings. I was...
  3. chrispy1971gtx

    Cheap, LS beehive Valve spring setup for 340??

    I read somewhere on here before, that there is a good quality and relatively cheap LS beehive spring swap that can be done for moderate valve lift, under .500". I couldn't find it in the search engine, but was wondering if anyone knew the numbers or applications. I'm reconditioning a 73 340...
  4. chrispy1971gtx

    [WANTED] LD4B intake, wanted.

    Looking for an LD4B in good shape. Have a 71 340 4spd OEM dual point distributor to trade? PM me here. Thanks Chris
  5. chrispy1971gtx

    [FOR SALE] 1969 mag hubcaps.

    Nice clean set of 4 mag hubcaps. Not perfect, but pretty darn clean for age. All clips, etc, intact. $350 shipped in 48 states. May trade for good used outboard 440 6v carb for 71.
  6. chrispy1971gtx

    [FOR SALE] W2 Victor intake.

    I have an excellent used eldebrock aluminum Victor w2 intake manifold for sale. $285 shipped in 48 states. Pm me here. Thanks.
  7. chrispy1971gtx

    Early W2's and real-world performance gains?

    What kind of performance gains can I expect when using a properly setup set of very early W2 econo's w/iron rockers, along with an matching MP Dual plane intake, with a stock 68-71 340 short block? Baring a milder performance cam, like a 274/474, or XE268 C.Cam? My point here, is .. to look...
  8. chrispy1971gtx

    [FOR SALE] 273 rocker assemblies

    Excellent used 273 rocker arm kit, complete with upgraded adjusters. 325 shipped in 48 states. Pm here Thanks
  9. chrispy1971gtx

    [FOR SALE] Forged .030 factory replacement pistons.

    I have an excellent used set of 8, .030 over forged TRW/FM replacement forged pistons. Listed for 340. (2332P) is the part number, which is superseded to 2316's now. Complete with pins, clips, and excellent pistons which literally no scuff marks on them. Only ran a very short time. $250...
  10. chrispy1971gtx

    [FOR SALE] P3690182 Pinion Snubber 8-3/4.

    I have an NOS pinion snubber I bought years ago. Never mounted or used. Its $70 new. $45 shipped in 48 states. thanks Chris PM me here.
  11. chrispy1971gtx

    [FOR SALE] NOS Sealed Power/FM 383 forged pistons .030 over.

    I have a complete set of .030 over 383 forged pistons & pins, with the good compression height (1.920). This is the early version of the current L2315 replacement piston ($425 from summit). 2257P TRW. Excellent condition. $250 shipped in 48 states.
  12. chrispy1971gtx

    [SOLD] LD340 Intake Manifold $275

    Nice clean LD340 intake manifold. Does have MP modification. Kansas City location. $275 shipped in 48 states.
  13. chrispy1971gtx

    [FOR SALE] Offy "360 Degree" 340/360 intake. $175

    Like new Offy 5884 360 Degree 340/360 intake. Cast date of Jan/1997, with the good ports. Single plane design for 1500-8000 RPM, according to Summit Racing. Nice intake, with stock height/profile. Uncut or modified. $175 shipped in the 48 states.
  14. chrispy1971gtx

    [FOR SALE] 273 mechanical rockerarm kit $175.

    Complete 273 adjustable Rocker Arm kit. Banana groove shafts, rockers, spacers, mounting bolts, and complete set of good used original push rods (7.50" total length). Cleaned, tumbled. Found galling under one rocker, see pic. $175 shipped in 48 states.
  15. chrispy1971gtx

    [SOLD] MP 284/484 camshaft, new. $225.

    New, mopar performance 284/484 hydraulic camshaft. Box, cam, lifters still in package, from 1995. Cam was only installed in mockup short block, removed, put back in box. Currently $395 from summit. Kansas city Location. $225 shipped in 48 states.
  16. chrispy1971gtx

    [FOR SALE] 340/360 Offy intake and MP-Cam Package.

    I have a really clean, nearly like new, Offy-360 degree aluminum intake. Part number 5884. Its a single plane, designed for 1500 to 8800 RPM, according to Summit description. They were $365 new. Offenhauser 360 Degree Single-Quad High-Rise Intake Manifolds 5884 A Holley 4160 series, 1970...
  17. chrispy1971gtx

    [FOR SALE] 1969 4spd Conversion kit.

    I have a 1969 4spd transmission, original hurst shifter/mechanism assy for non-console, pedal assembly, and excellent used 4spd hump, engine brace brackets. Matching 69 bell housing and flywheel. Also have a steering column that is for an automatic with manual steering and a steering box (to...
  18. chrispy1971gtx

    [FOR SALE] F/J/M body 26" fan shroud.

    I have a nice clean, uncut, 26" fan shroud for aspen RT, roadrunner, etc, F- body with heavy cooling . Part number: 3869812 $100 shipped, obro, in the 48 states. Plus 3% if using PayPal. Thanks.
  19. chrispy1971gtx

    [FOR SALE] Mallory dual point for small block.

    Mallory YL579HP small block dual point distributor. Needs some cleaning up, but otherwise complete. $45 shipped in 48 states, plus 3% if paying paypal. Thanks.
  20. chrispy1971gtx

    [FOR SALE] 90 degree oil adapter aluminum

    I have a super clean, used 90 degree oil adapter, complete with bolt and new mp seal kit. 3690743 cast number. $95 shipped in 48 states, plus 3% if using paypal. PM me here. Thanks.
  21. chrispy1971gtx

    [FOR SALE] LD340 Intake manifold

    I have a nice, clean LD340 intake manifold. It does have the wall milled per the MP Parts book, but other than that its all stock. Threads are good. $325/ shipped in the 48 states. Thanks Chris 816-7.2-six-45.one.2 or PM me here.
  22. chrispy1971gtx

    [SOLD] NOS MPDC 90 degree oil adapter.

    P3690884 adapter. Complete with instructions. $175 shipped/obo. PM me here. Thanks Chris.
  23. chrispy1971gtx

    [FOR SALE] 1969 mag wheel covers.

    Good clean set of the 14" 1969 mag wheel covers. 2, have some curb rash, the other 2 are damage free, all have very slight pitting. All are complete with all tangs, clips, fasteners, etc. Kind of hard to find, they are 45 years old and need cleaning and polishing. Will need restored for an...
  24. chrispy1971gtx

    [FOR SALE] Redstripe Penny Hub Caps

    I have a nice set of (4) red stripe penny hub caps in great condition. Stainless Steel. No dents or damage, just needing polishing and mild TLC. $325 shipped in the 48 states. message me here or text to: 816-seven-2.6-45-one-two. Thanks Chris
  25. chrispy1971gtx

    [FOR SALE] 1969 & 1970 340 Carbs.

    I have (2) 69 340 carbs. (1) Very nice, clean 1969 340 automatic carb. 4639S-G8 date code with correct tag. Missing fuel inlet piece and the linkage rod only. Very good condition. $175 shipped in the 48 states. Could probably bolt on, adjust, and be ready to go. (2) 1969 340 4spd carb. D9...
  26. chrispy1971gtx

    Heater and radio delete on a 69 dart?

    has anyone seen a 340 69 A-body with radio and heater delete? I've only seen a 69 340 swinger with radio delete, but nothing else. 68's were all different..and they are being reproduced, but nothing for 69 delete cars.
  27. chrispy1971gtx

    [FOR SALE] thermoquads

    I have 4 thermoquads for sale/trade. (2) 6322's (1 basket case, one complete) 1-6321 complete 1-9103. All needing restored, reconditioned. $65 plus shipping
  28. chrispy1971gtx

    [WANTED] 273 HP valve covers.

    Wanted: Good clean, complete, set of 273 HP valve covers. No junk, no cut up ones. Have for trade: modified 340 LD intake. Wall milled down in center, other than that, in great shape.
  29. chrispy1971gtx

    [FOR SALE] Sale or Trade, Bushed 340 Rods.

    I have 12 good bushed "645" 340 rods. Cleaned, all with matched caps/bolts/nuts. Strangely, one rod I disassembled off a 340 piston was not bushed, (13-total). Also have an excellent set of "banana groove" rocker shafts. Looking for: a good, complete set of 273 HP Valve covers in...
  30. chrispy1971gtx

    [FOR SALE] 1970 340 AVS Auto.

    I have for-sale, a nice 340 AVS carb for restoration. Complete with original tag and solenoid. DO 4934s. Would need restored, but is complete and original. Tag says 4934S 0990 69. $225 shipped in 48 states. Thanks Chris
Back
Top