Search results for query: *

  • Users: jcmeyer5
  • Content: Threads
  • Order by date
  1. jcmeyer5

    [WANTED] 1969 Dodge Dart Glove Box Striker/Catch

    Looking for the striker for the glove box and the screw plate that it screws to.
  2. jcmeyer5

    [Found!] 1969 Dart Driver door

    I am in sudden need of a new driver door. I only need the door shell. I’d like it to be in good condition. I also need the lower hinge.
  3. jcmeyer5

    [Found!] 1969 Dart Temp or Fuel gauge

    Needs to be working.
  4. jcmeyer5

    [Found!] Prestolite LO horn

    Evidently these damn things take special 5/16 bolts because a regular 5/16 bolt got stuck. And I cant get it out. So it’s dead. I need another one.
  5. jcmeyer5

    Clutch pedal hitting… something

    1969 Dart. Original 4 speed car. Dad was concerned the clutch wasn’t properly adjusted because there was no free play at the top. He had one of these cars long ago and knows them well. I looked under the dash and found a “spur” on the clutch pedal was hitting a flange. I think the flange is...
  6. jcmeyer5

    Temp and fuel gauges no bueno

    Finishing up odds and ends on dads 69 Dart. One of those is to get the temp and fuel gauges working. I went through all of the engine wiring, so I know the wiring for the temp gauge is good and hooked up. Let’s start there. I have the regulator in hand. I am testing it with a 12V power...
  7. jcmeyer5

    What is this bracket?

    Stole the photo from a wanted ad. I have one of these at home, and the car is completely assembled.... and I havent installed this piece. 1969 Dart. Where does it go?
  8. jcmeyer5

    [Found!] Glove box door hinge 69 Dart

    Looking for a complete hinge with good springs. Would LOVE for it to be black and not needing paint, but I will take what I can get.
  9. jcmeyer5

    [Found!] Mopar Steel Wheels 5x4

    14” diameter. 5.5-7” width. Need to work with 8-3/4” dog dish caps. Looking for 5, will take 4.
  10. jcmeyer5

    Steel wheels

    We are at the point on our project (1969 Dart 340 Swinger) that we are looking for wheels. We want steel wheels with dog dish caps. 5x4 small bolt pattern. Nothing fancy. Problem is finding the right ones. We will be painting them red, So I really don’t want to spend money on new. I have a lead...
  11. jcmeyer5

    [Found!] 1969 Dart hood striker

    Misplaced or otherwise lost our original one. It’s one of the last pieces we need.
  12. jcmeyer5

    Ran into 5 Super Stock cars today at Mecum Indy

    The Gene Snow car was there, but I didn’t take another picture, so that one is from 2 years ago
  13. jcmeyer5

    1969 Dart Door/Quarter Overlap

    Need some help. I dont think this is right, but I dont remember how it came apart. Attached are pictures of how it is now. The door glass is perfect with respect to the A pillar and roof line. I am guessing that means I need to move the quarter window backwards (assuming what I have now isnt...
  14. jcmeyer5

    1969 Dart door glass - hole at bottom rear of glass?

    What is this hole for? It is about the same size as the hole for the lift bracket. When we got the car these holes were empty on both sides.
  15. jcmeyer5

    1969 Dart - does the windlace go under the sill plate?

    Pretty simple. I am at the point where I am putting windlace on the car. I dont remember taking any off. I dont know if it goes all the way under the sill plate or not.
  16. jcmeyer5

    Seat belt positions

    I have the seat belts out of our 1969 Dart. I need to put them back in. The interior is not stock - I believe most of it came out of a 1971 Valiant. I am ignoring the shoulder harnesses. Here they are: To go through them: A and B both have covers that go with them. C is the longest male...
  17. jcmeyer5

    Help with roof seals and window alignment

    Hey all. Yesterday we finished installing the roof rail seals and window regulator. We started to adjust the same. Quarter window is good. Door window, not quite there. At the quarter window it is good, but then gradually opens up until the front of the glass where I’ve got a 1/8” gap. But...
  18. jcmeyer5

    1969 Dart - secret to getting headliner trim to stay?

    I tried installing the trim that goes along the top and down the quarter window headliner edge. I can’t get it to stay on. It doesn’t want to clip on long enough to do anything. Is there a secret I don’t know?
  19. jcmeyer5

    What are these clips?

    They were in my fasteners box, but I don’t remember taking them off the car (1969 Dart) What are they?
  20. jcmeyer5

    [WANTED] Windshield reveal clips

    I have 10. I need 6 more. See photo for what I need
  21. jcmeyer5

    1969 Dart Windshield clips

    I’m at the end of my wits. The clips I got in my kit aren’t right. Top left appears to be the only one that will fit my car. It was the one I had the most of. Top right I have one piece. I can’t tell you where it came from, but the kit came with 18 that match it. Bottom left is from the...
  22. jcmeyer5

    1969 Dart quarter window guides

    Crap nevermind... i'm an idiot.
  23. jcmeyer5

    Package tray clips

    1969 Dart. I pulled out these two clips today. I am pretty sure they hold in the package tray. Do they glue to the bottom or do I need holes through the package tray?
  24. jcmeyer5

    Package tray installation

    Getting ready to put the package tray back in dads 69 Dart. Is there insulation that goes under it? Is it glued down? Not really sure how it is held in. Help.
  25. jcmeyer5

    Sail Panel Tabs Bend which way?

    I am getting ready to put the sail panel boards up, and there is this tab that runs along the bottom (the parts arent oriented correctly in the picture). It needs to be bent over It is scored for this, but I dont know which way it goes. Does it bend inward towards the center of the car or the...
  26. jcmeyer5

    What to use to attach sail panels?

    1969 Dart hardtop. I know what was originally used, but since it isnt seen, I thought maybe there was a better solution? I can see the tack/brad/nail that they originally used pulling right through the fiberboard sail panel. If I knew where to get the tack/brad/nail, I could add a washer to...
  27. jcmeyer5

    Where does this part go?

    I blasted and primered it years ago. No clue where it goes on the car
  28. jcmeyer5

    Fun with vent windows

    Does anyone actually use them? Anyway, I got some roll pins for the one I am working on. 1/16” seems to be too small. If you squeeze the spring washer it will fall right through. I can get it installed, and it does hold everything together. What is the right size though? I’m guessing 5/64” or...
  29. jcmeyer5

    Hardtop vs Coupe vs Sedan

    I hope I didnt f this up... Ordered a headliner for our 69 Dart 340 Swinger. Took 4 weeks to get it. The website said it was for a 67-72 Dart COUPE. It was the only option available. It didnt say SEDAN, so my logic said it was correct. It is a PUI Interiors part number AH750100. I checked...
  30. jcmeyer5

    Questions regarding electrical 69 Dart

    Working on sorting out the demons in the turn and braking system. Two things I am unsure of. First, I was under the impression that the flasher/hazard light switch was off in the center and on when up. Come to find that the switch mounts the other way, so it’s either down or centered. The dash...
Back
Top