Search results for query: *

  1. Kannon Herbert

    Trouble with gauges

    I’ve also noticed that 20dbl isn’t getting any power in any key turn position.
  2. Kannon Herbert

    Trouble with gauges

    Thank you so much for all this information, it’s going to make a big difference when I go to tackle this tomorrow. I seriously appreciate it.
  3. Kannon Herbert

    Trouble with gauges

    Alright, this problem has been plaguing me for weeks now. I have a 1974 Dodge Dart custom. My gas and temperature gauge do not work. I started by taking apart the cluster, checking the gauges for functionality, and fortunately they work. I decided to replace the IVR while I had the dash apart...
  4. Kannon Herbert

    Fried gauges?

    Update, the connections have been cleaned on the IVL and it appears to be working correctly. I suppose the fault may be in the senders or at the pin connections, firewall or at grounds at some point.
  5. Kannon Herbert

    Fried gauges?

    I tested the gauges again, and it appears as thought the current is being lost through the limiter. I just bought a new one, so this is strange. I will try cleaning the connections.
  6. Kannon Herbert

    Fried gauges?

    This worked. Looks like the temp gauge is likely fried, but thankfully the gas gauge is still operational. Appreciate the help.
  7. Kannon Herbert

    Fried gauges?

    T thank you. I’ll check that out.
  8. Kannon Herbert

    Fried gauges?

    Hi guys, I’ve been working lately on a 74’ dart custom, trying to get everything into working order. Lately I’ve been having troubles with the fuel and temperature gauges. I figured this was likely due to a faulty voltage limiter on the back of the cluster, but even after cleaning and replacing...
  9. Kannon Herbert

    Possible No flow to heater core?

    that’s the next step. I bet there’s something in there, it had been garaged for most of its life and it almost smells like something died in the box, as every time I turn on the fan it smells
  10. Kannon Herbert

    Possible No flow to heater core?

    yes I can hear them moving. I’m gonna take apart the box and see if I can verify that though.
  11. Kannon Herbert

    Possible No flow to heater core?

    I did flush the core before re-installing all components and refilling coolant, so I’m pretty positive the core isn’t clogged and my hoses are not crossed at all.
  12. Kannon Herbert

    Possible No flow to heater core?

    alright. I’ll look into the water pump next. Thanks for the help :)
  13. Kannon Herbert

    Possible No flow to heater core?

    Hi, I hope everyone is doing well. I’ve been taking some time to work on my 225 74’ dart this last weekend, and I’ve encountered something that’s baffled me. My heater currently does not work, and I decided I likely needed a new heater core, but I also decided I would continue with a coolant...
  14. Kannon Herbert

    fuel spill-over

    Yea I’m located In Oregon. It’s strange too because it wasn’t happening at all for the first few times I filled it, but then it started happening recently.
  15. Kannon Herbert

    fuel spill-over

    I’ve been trying to find where they are typically located on a bodies, with no luck so far. Do you happen to know where they run?
  16. Kannon Herbert

    fuel spill-over

    Thought that aswell, but I decided to try a few stations around town, and all the same. I wish I could pump my own gas here, because then the problem would be somewhat solved lol.
  17. Kannon Herbert

    fuel spill-over

    Hello everyone, hope we are all doing well in these times. I've got a question that has had me stumped for days now. essentially, I have a 1974 dart special, and I'm a little new to it. Im currently trying to fix some issues with the clusters such as no feedback on the fuel and temperature...
  18. Kannon Herbert

    Turn signal fun

    Right. I have continuity through the flasher, and continuity up the steering column, yet when I flick the indicator, I don’t get any continuity to the wires leading back out the Column to the gauge cluster. It’s the strangest thing.
  19. Kannon Herbert

    Turn signal fun

    Stop lights work, must be the switch then.
  20. Kannon Herbert

    Turn signal fun

    Yea the flashers work odd enough but nothing disconnected from the ignition switch. Odd.
  21. Kannon Herbert

    Turn signal fun

    recently I've been working on a lot of the gauge wiring on my 1968 Plymouth Valiant and I’ve discovered a problem. For the longest time my turn signals had no problem operating and I was getting power to the proper wires depending on what direction I clicked the signal into. However as of...
  22. Kannon Herbert

    Hello everyone from Oregon :)

    So far I've been working as much as possible to turn it into a daily, id prefer to have something I'm comfortable with working on and know my way around, not really a total OEM restoration. :)
  23. Kannon Herbert

    Hello everyone from Oregon :)

    Id love to introduce myself, my name is kannon, I’m 17 and I recently purchased a 1968 Plymouth Valiant and this forum has been a major help in my restoration journey on my first classic. I’ve always been intrigued in classic cars and this community is wonderful. It’s great to see how everyone...
Back
Top