Search results for query: *

  1. D

    replace head bolts with studs without removing head

    I have a veeeery slight seep on the HG. Id like to either retorque the headbolts or just replace them with studs. Dont want to remove the head, can i replace the studs one at a time and retorque initial then when they are all in do the second and third passes?
  2. D

    Slant rear main and oil pan saga and fix

    Since I have owned my car for a few years the oil pan and rear main have always been trouble. From minor to serious leaks and back again, its been a HUGE pain in the ***. Bought the car and the leak was minor but annoying from the rear main only. I suspected an original rear seal as all of...
  3. D

    late and early rear main seal retainer

    ive now had two different shops (one beind Doug D) and me work on my engine to solve a rear main leak. crank was replaced and engine rebuilt during this time. cant get the rear main/pain to sop leaking Pan is true and flat , crank is round and not pitted. Is there a difference between an...
  4. D

    Champion 3 Row Rad into a 64 Dart

    1964 Dart, 225 Slant, 904 pushbutton all stock , 4 blade engine fan no clutch, PS My stock origial rad just could not keep up with the heat here in Las Vegas. On hot days (100+) with a clean cooling system and a fresh water pump the car would bleed coolant from the numerous patches on the rad...
  5. D

    [FOR FREE] stock 1964 Dart slant 6 rad (Las Vegas, NV)

    Has had the top patched a few times and im putting in a new champion. Still works great and the core tubes are nice and clean. For someone who wants to refurb it maybe ? Free pickup only
  6. D

    [FOR SALE] 65 dart headlight bezel, horn trim ring, gas cap and set of early A door locks

    i have three bezels that are in good used condition , no major dings $100 shipped for all three Early A horn trim ring $35 shipped and a complete set of door locks for what i think was a 65. I dont have keys for the doors and trunk but the glovebox? key seems to work fine. they all came...
  7. D

    Need someone in the SF bay area to do rear main and oil pan

    Long story short I had the engine rebuilt by a local. This person's having some financial/logistical difficulty outside of thier control and will not be able to redo the oil pan and rear main. It drips. I don't have the time or space to pull it myself. All local shops here refuse to work on...
  8. D

    Free 1963-1965 rear bumper and mounts

    Bumper is dented but could be straightened chrome is okay. Mounts are fine just ugly. No shipping pick up only in 95008 Pm me
  9. D

    65 dart convertible in San Jose pick and pull

    I stopped by yesterday in the morning and took a few small trim parts. Cars is slant six, column shift auto Floors are super rusty but body panels are relatively straight. There were few other guys they're already pulling parts off the car but if you're looking for big stuff it should still be...
  10. D

    Installing stereo in 1964 dart convertible

    I wanted to install a stereo with the following features/restrictions: BT AM/FM no dash cutting Tactile interface runs off existing stereo circuit I know there are tons of option in modifying the existing am radio to get the above features but, the cost is high. I also didn't want to use...
  11. D

    Show me some pics of clean heater hose routing.

    I'm trying to clean up the engine bay and the heater hoses laying on the valve cover are irritating to me. I want to use regular rubber hose but I'd like to move them over to run along the top of the fender and then come back to the water pump in a cleaner fashion. I know that some Chevrolets...
  12. D

    Floor mats 1964 dart

    I'd like to get some floor mats for the interior of my 1964 dart GT convertible. Interior color is a light blue. I've seen ACC and legendary auto interiors any other options out there ?
  13. D

    [FOR SALE] Slant six timing cover late

    Late model timing cover. Has been blasted , etch primed and top coated with engine enamel. Comes with timing arm. $60 shipped fits all years slants.
  14. D

    [FOR SALE] 1963-1965 rear dart bumper

    Dented but chrome isn't bad at all. Hammer it out or use as a core. Comes with brackets. $80 no shipping. I'm in SF Bay area.
  15. D

    Early trans dual suction filter adapter

    I put a deep pan on my early a904. I didn't know that it needed a two-hole filter adapter instead of the single hole adapter it came with. Apparently now one of my pumps does not have suction. Car still drives fine but I obviously want to get this fixed before I blow the pump. Does anyone...
  16. D

    Late model timing cover interchangeability

    I grabbed a slant timing cover off of a 1990s D150 with slant six. When I got it home I noticed that the timing pointer is about 120 degrees off the original timing pointer location on my 1964 timing cover. Red arrow is approx location of original timing pointer. It looks like it will bolt up...
  17. D

    [SOLD] Wheel Vintiques 15in brushed trim rings rally wheel

    These are new in box, decided I didn't want them on the car. They were $45 a pop new. In perfect shape. Fits 15x7 or wider Rallye wheels , can be polished if wanted. $145 shipped
  18. D

    New Crank or new engine? Good re builder in SF bay area?

    chasing an oil leak on my slant i found the rear main sealing area to be very pitted and ugly. After buttoning the engine back up with a new seal in place and a new pan gasket its still leaking. I'm thinking the crank is shot. Buy a new crank from somewhere or buy a reman engine ? anyone...
  19. D

    Oil Pan and Rear main parts advice

    64 dart, cleaning up oil leaks. I want to do this once so id like to get the best gaskets available. For oil pan: Tennessee Gaskets Silicone set Oil Pan Gasket Set - Chrysler, Dodge, Plymouth & Truck Slant 6 - Silicone Gaskets - Real Gaskets Tennessee OR Felpro OEM style (cork)More...
  20. D

    early A trans shift cable routing or brackets

    Trying to keep my shift cable from rubbing on the exhaust . Any one have a pic of how the are supposed to look stock for a slant 6/a904 setup in an early A? 64 dart
  21. D

    [WANTED] 1963-1965 rear dart bumper

    Need a bumper , driver quality, no dings
  22. D

    [Found!] Early A door lock

    Need one of the early A door locks , large diameter type . Just need one, no key needed.
  23. D

    Lend me you ears

    Edit: your* Just finished the first valve adjust on the new to me 64 dart with a 225. Before I did the adjustment the engine was nearly silent when running with a slight tick when hot. I warmed up the engine by driving it around and getting it to operating temperature. Remove valve cover and...
  24. D

    Quiet muffler for 2 1/4 exhaust

    Well im about to replace the stock tiny exhaust. I love that the car is very very quiet but, the stock exhaust is loose, rusty and beat. ill be going with 2.25 pipe I thinking about this unit: https://www.amazon.com/dp/B0181H3Y1U/?tag=joeychgo-20 The muffler shop can also put on a walker...
  25. D

    Plug opinion

    These plugs have a few hundred miles on them. Stock slant drool tube head. 3/8 spacer under stock carb. They seem a little light to me. Thoughts ?
  26. D

    [Found!] 14in SBP steel wheel narrow

    Looking for a narrow or stock 14in Steel wheel in SBP. need it for a spare San jose area
  27. D

    trans cooler line routing

    Can someone post a pic of the stock routing on the 1964 era trans cooler line routing? Mine are a mess and i want to replace them with these. Want to see what they would look like from the factory https://www.amazon.com/dp/B00KQWCJ24/?tag=joeychgo-20
  28. D

    [FOR SALE] Dual circuit master distribution block and lines

    Long story short I bought these lines and blocked separately. I ended up not using them and doing custom lines instead. the block has some minor shipping damage. Threads intact and it looks fine otherwise just cosmetic. It's $70 plus shipping from inline for the set. $55 shipped for the...
  29. D

    Electric Choke help

    My choke wasn't working well so i opted to move to electric with the super choke 1231. Starting in cold weather is still really challenging so i figured id post here to see if i have it right. Image one is how the carb looks after sitting from yesterdays long drive. turned off the car and...
  30. D

    oil pressure at startup and the fix

    When my car would start the oil pressure would take 5-8 seconds to turn out the dummy light. Many people told me this was the norm but, it seemed odd to me. After doing a ton of research I saw that there was supposed to be a standpipe anti drainback on the oil filter housing and that the oil...
Back
Top