Search results for query: *

I have a buddy that lives near Raleigh NC that needs a 225 slant 6 that's in good running condition for his 69 Dart. Please reply with the mileage (if known), and your asking price

A mutual acquaintance of mine that lives about 20 miles SW of Raleigh NC either needs a good running slant 6 for his 69 Dart or a recommendation of someone in that area that's competent and reliable to rebuild his. Does anyone here have any suggestions for me to give to him? Thanks, Tracy

I wanted to warn everyone with varnished/stained hard wood surfaces that watch out for the generic Lysol Walmart sells under the label "Great Value". I bought a can of it cause it was less than half the cost of regular Lysol and yesterday my wife started using it and immediately noticed anywhere...

I already know of a few other hams on this board. Just curious who is very active and what your into. I got my ticket 20 yrs. ago next month. Nice relaxing easy hobby that you can do while it's too cold or if your between jobs on the car. I built a 6 element beam for 6M in 2001 and then a 13 ele...

Need a good brake T-block and bolt/vent for a 8-3/4. Let me know via PM how much it'll cost shipped to IL 62009

I need 1 good 67-69 FB rear courtesy light socket. Just the socket, I have the lens/cover. Let me know what you have and the price shipped to IL zip code 62009 Thanks

I don't know all the details except that a good friend and long time gearhead (75 yrs old) died last night as the result of someone speeding (cops estimate 75-80 mph at time of impact, 55 mph zone) and not paying any attention (no evidence they even hit the brakes before impact) hit my long time...

I need 1 u-joint strap for a 1330 yoke. If I'm not mistaken the bolt c-t-c measures 1.4875" Thanks, Tracy

As the title says it's a 3:23 sure grip in a 489 case with a 7260 (small) yoke. This came out of a 39,000 mile Challenger a buddy of mine bought. (He went to 3:55's). I ran it in my car for about 6-7000 miles and it performed flawlessly. No gear noise and the sure gripped never slipped and the...

Been having some issues with my right knee lately and today it came to a head. Pulled the truck into the garage to work on my amateur radio antenna and when I stepped out of the truck something snapped in the back of my knee and if I hadn't been close to the Cuda to catch my fall I would have...

Brand new aluminum heat sink type 12" trans oil cooler. Has 3/8" barb fittings. $30 plus shipping Used Long 11" x 4-1/2" 12 pass engine oil cooler. Has 1/2" NPT female threads and one adapter to 8AN. $15 plus shipping Located in central IL. Both will fit in a USPS medium flat rate box so...

Decided not to relocate my springs so I'm selling the kit. Please note: this kit didn't come with a set of shackles so you'll have to re-use yours or buy a new set. It does have everything else though $80 plus shipping from central IL. I accept PayPal

Porter cable 3/8" butterfly impact. Works great, just don't use it anymore cause I have an electric impact. $12 plus shipping Blue Point 3/8" air ratchet. Works great. $20 plus shipping Miller 8515 tool for servicing a 4.7 Dodge. $10 plus shipping Dremel tool. Works great. $15 plus shipping...

Anyone here done a 4 link on their A-body? If so I'd sure like to see some pics. Especially of cars with full exhaust systems cause I'd like to retain tailpipes. Thinking about doing it on my Cuda over the winter. Haven't decided which would be better/easier to do, parallel 4 link with panhard...

All 3 books are used but in very nice condition (9 of 10) How to hot rod small block Mopar engines by Larry Shepard. $14 shipped How to build Dodge/Plymouth Performance. $12 shipped Challenger and Barracuda restoration guide 1967-1974 by Paul Herd. $16 shipped PM me if interested. I take...

Comp cams XE274 flat tappet hydraulic cam and lifters that'll fit a SB Chevy prior to the LS series. Has approx 5000 miles on it. Worked fine, removed to install a bigger cam. I took it out myself and carefully marked which lobes the lifters came off of and put them in the box the new lifters...

Now don't all you Cuda FB lovers shoot me when I ask this, lol... Has anyone ever saw a rear spoiler/wing on a 68 Cuda that looks decent? If so do you know who made it, or was it home built? Pics would be great

Got this in a batch of parts and was told it was off a 64 383 but I can't confirm that. Has a casting number of 2780987-5 and is a drivers side inlet. Good condition $75 OBO plus shipping from central IL

NEW LOWER PRICE!! 600 cfm Holley. This carb ran great last fall when I took it off a car destined for a restoration. It has sit since then so it might be a good idea to refresh it. I robbed the electric choke stat off it for my father-in-laws car so it'll need a new stat $65 plus shipping from...

LOWERED PRICE! Carter 9626SA carb. Dirty but in good rebuildable condition. $65 plus shipping from central IL It'll fit in a medium flat rate box so if you live anywhere in the US the shipping will be $14

12 pass plate style oil cooler with 1/2 NPT female threads. Has a 1/2" pipe to -8 AN adapter in one port. Good condition. Brand is Long Approx 11" long $20 plus shipping from central IL. It'll fit in a medium flat rate box so if your anywhere in the US the shipping will be $14

Very nice Original set of bucket seat tracks from a 69 Cuda. They were rusty when I got them about 10 yrs ago so I blasted them and painted them with Por-15 rust treatment and except for dust they look just as good now as they did then. The adjusters work smoothly. Some of the original mounting...

Complete original set of front black lap belts from my 68 Cuda. Retractors work fine. The plastic bolt covers on the stationary belts split when I pulled them back to get at the bolts. See pics $75 OBO plus shipping from central IL

2.76 ratio 8-3/4 gear set for 489 case. Real nice condition. $50 plus shipping from central IL. If your in the states the shipping will be about $15

Quite a while back someone posted info about some motor mounts (early biscuit type) that had a bolt through them or some sort of lock so they don't break. I've tried Schumacher's poly mounts and my 408 tore them up in 5k miles so for now I have solid mounts on it. It doesn't vibrate bad but I...

Very nice used Edelbrock 600 cfm carb electric choke model with fuel line. I took it on trade for work I did for a guy and he said it only had about 5000 miles on it and it looks like it. $150 plus shipping from central IL

Looking for a pre 95 A500 core trans to rebuild. I live 50 miles south of Springfield IL and prefer something close enough (200 mile radius) for me to drive to pick it up Let me know what ya got

I'm probably whistling in the wind here but does anybody know a way to get into the trunk of a 68 Cuda FB when the key won't open it up short of destroying something? I replaced the worn out and squeaky trunk latch on my car this evening with one that seemed tight and worked on the bench and I...

Brand new set of bumper end brackets. I know they fit a 68 Cuda but no idea if they fit anything else. I bought them last year when I had my car painted but the dingleberry filled the bolt holes in on my front fenders and I didn't want to chance buggering up the paint by drilling them out $12...

Good used set of factory 340 leaf springs with Energy suspension bushings in them. One sets about 1/4~1/2" higher than the other but I never noticed the car sitting lopsided with them on it. $125 OBO plus shipping from central IL