Search results for query: *

Thanks! I confirm you that it was a positive feed, directly from the battery to the PCM fuse box.

Hi Everybody, A couple of hours ago, following a Randy suggestion, we connected an additional positive battery wire directly to the PCM, and finally the engine is working fine!! Thanks all for your help!

I checked the ground a couple of times, due to the original error, but I'll do again and I let you know if something change. Thanks!

Finally I bought the Witech 2.0 scanner and tried to connect to the ECU, but the software show me the following error message and I can't access to any menu to do the Pedal learn procedure. Could you give me some advice? As you can see in the pictures bellow, the scanner complete de...

Hi logancuda, thanks for your support! The problem shows up even cruising at 2.500 RPM. The engine begis to hesitate and loss power. I'm talking with Randy, he suggested me to do the Pedal Learn procedure with an scanner, I just bought the wiTech Micropod and I will try to apply this...

I recorded a video, in which you could listen the engine failure. I hope it helps. Thank to all!

Thanks, it was a really nice restoration project! The car has a T56 6 speed manual transmission. We double-checked all vacuum lines and ports and threre are no leaks.

Hi, thanks for your reply. I've a manual transmission. The problem appears even when the car is in neutral and I accelerate it hard two or three times.

Hi, thanks for your help. Yes, it is a drive by wire throttle. We did the learn procedure that you described above, but it didn't solve the problem. On the other hand, I found an Instruction Sheet from MOPAR that explaine the Pedal Learn process as follow: Pedal Learn Visit a MOPAR dealer to...

Thanks for your help! Yes, I'm talking with Randy and he allways give us good support. In the meantime, I posted this thread to have additional ideas.

Hi everybody. I'm writing here looking for some help. I installed a 6.4 GEN III Engine (SRT 8 392/485 HP 6.4L Gen 3 Factory Assembly Line Engine - Bouchillon Performance Engineering) with a Computer Management Kit in my 1970 Cuda, all brand new. The engine starts and idle fine, but as soon I...