Search results for query: *

  1. H

    Burned pushrod

    Finally got a chance to tear into my engine, it seems that the cam grinder didn't get the groove for my rocker arm oiling in the right spot. The groove was only partly covering the hole to the rockerarms. Thanks to everyone for the ideas and thanks to Muscle Motors for working with me on this...
  2. H

    Burned pushrod

    Good Idea I'll try that Thanks
  3. H

    Burned pushrod

    I primed motor when I installed the restricters, can't cut valve covers spark plugs are in them, the restricters are on the intake rocker shaft the oil passage splits when it goes into the rocker shaft support one to the intake and one to the exhaust rocker shaft. I'm thinking I will try a new...
  4. H

    Burned pushrod

    Chamfer lifter hole? Checked for oil flow when I installed restricters, larger on restricters would let more oil go to Intake side, lifters are not bushed I need to pull lifter valley cover to check, lift is only .691 In. .652 Ex. something worth checking out. Indy Legend Hemi heads don't have...
  5. H

    Burned pushrod

    Got a problem with #8 exhaust pushrod burning on the cup end, 572 Hemi with Indy Legend heads and roller rocker arms. Getting about 200-300 mi. before the lash increases, adjuster threads showing 1, restricters on intake side .043. All holes in rocker arm are open and holes in rocker shaft are...
  6. H

    Electric water pump

    Running a CSR on my 572 Hemi in a 67 Dart with a Be Cool radiator, no poblems on the street or highway, have driven to Mopars at the Red Barn about 150 mi.
  7. H

    Visit with us at the Nat's!

    Nats were good,weather was better than last year,the kid directing parking didn't have a clue as to what he was doing, got to watch more racing this year instead of looking through swap meet, even though I did wonder around it when things got slow, car corral had some interesting buys, Had a...
  8. H

    Hemi in A body modifications to fenderwells?

    I used a K-frame from Hemispherical Products that was just redone by welding on the Hemi mounts, it has 1/4" spacers on it, as far as the pass side inner fender I cut out a piece almost to the shock stud, rewelded in a new piece that was flatter. But because I was going to put this motor in a...
  9. H

    pros and cons of a 9 3/4 rearend

    I have one in my 67 Dart, tuff to break, heavy, can't change gears as easy as a 8 3/4, but sure looks good from behind, Moser & Strange both make complete rear ends any width.
  10. H

    Post your combo

    Car 67 Dart Weight 3124 Gear ratio 3.73 Tire diameter 29.5 RPM through trap N/A MPH through traps N/A ET N/A Engine CID 572 Head Type Indy Hemi Valve size 2.3 I 1.94 E Head Work Super Mod Porting Cam Manufacturer Comp Cams Cam specs at 50 268 I 272 E...
  11. H

    insurance is a scam.

    Called Hagerty for a quote on ins. for the Dart, it was over $500 for $35000. Called Grundy and they cut it in half for the same amount.
  12. H

    Dukes of Hazzard...

    Jessica is nice but she is not Barb Bach!
  13. H

    Mopar Nationals?

    Going to be busy this weekend putting the tranny back in the Dart, had to replace the hyd. throwout bearing and clutch, underestimated power, put in Passon alum. case. If any of you guys are staying at Holiday Inn at the airport stop over and say hi. Probibly be in back parking lot, have to...
  14. H

    Mopar Nationals?

    We just booked 25 rooms at the Holiday Inn at the airport, might still be rooms left.
  15. H

    Mopar Nationals?

    I`m going along with about 20 other Mopars that are in the club I belong to, Tri State Mopars.
  16. H

    sick of messing with the holley

    Glad you guys had good luck with your Demon carbs, I have a King Demon 1090 that I put on my Hemi could not get it adjusted properly, was about ready to buy a Holley, called Bigs and talked to Jesse,he said that was not uncommon with Demons, I sent my carb to Bigs, Jesse found METAL shavings...
  17. H

    HEMIs aint good???

    This writer is just that a writer, any one with some understanding of engines and the mechanical ability can tune a Hemi to run good, they are not that radical. My first Hemi was a 68 GTX, granted the carbs can be a little time consuming but once they are dialed in they work great. So you have...
  18. H

    This is the carb I ordered today

    I was impressed felt very comfortable talking with him not like talking to Barry Grant, I`m looking forward to see what he can do for me.
  19. H

    Group Buy. Acme Tach brackets

    Got one on my car with a 5'' Phantom tach that has 2 housing nuts on the back that I siliconed a rubber cover over and let it rest on the windshield hasn`t moved yet.
  20. H

    This is the carb I ordered today

    Thanks for Jessie`s phone number, called him he thinks he can dial in my King Demon without me having to buy another carb, seems like alot of people I have talked to don`t like Demon carbs. I going out to the garage to take mine off this weekend and ship it to BIGS, thanks again now I can spend...
  21. H

    This is the carb I ordered today

    Why didn`t you like the Demon, having problems with getting mine dialed in, e-mailed Bigs, want to try something different before I take it to chasis dyno
  22. H

    HemiDart

    4 wheel disc brakes, willwood front stainless steel brakes rear,poly front susp bushings, tubular upper control arms, 340 torsion bars, hemi k-frame, comp engineering 90/10 front shocks, rancho rear drag shocks, hooker 2 1/4 headers, heads p&p& flowed by Muscle Motors and all machine work...
  23. H

    HemiDart

    doesnt hook up to bad got goodrich drag radials and Tri City Competition springs but I am only getting about 5/8 throttle
  24. H

    HemiDart

    67 Dart 270 tried to make a Super Stock clone 572 Hemi, 18 spline 833,Dana 60 3.73,glass hood,fenders,trunk lid, bumper,6pt. cage.
  25. H

    What area are you from?

    Antwerp, OH. Northwest corner
  26. H

    What Clutch you 4-speed guys (and gals) running????

    I am using Centerforce Dual Friction behind a 572 Hemi and have had no slippage but I am running drag radials
Back
Top