Man that is really messed up ****, saw summit is allegedly saying they are pulling that product off website and not selling the inventory but then the next question is, well shouldn’t all Speedmaster be pulled because it’s all knock off product
your numbers are fine- my 418 Stroker is fresh maybe 200-300 miles, Melling pump in that runs 20-25 hot idle and 55psi cruising under load. Cold start is probably a hit higher around 65 I’d say. I run 10-40
I just put a set of the Bilstein RCD on all 4 corners of my 73 Duster 340, stock torsion bars, they are awesome car has almost no body roll. Rides great’s handles great- PST offers FABO members 10% discount too
I bought there small block kit- SCRL2KIT-HF
I don’t have power steering but ended up running a Duralast 15465 belt for my setup. I also have the aftermarket alternator adjust to clear the aftermarket heads and man you can get a good belt tension with that kit. Well worth the $100 or whatever I...
I installed my sway bar on my 73’ the bolt is def super long I ran mine with the bolt head on the bottom side and nut on the top, thought about trimming some excess threads.
Luckily I didn’t have to cut spacers, spool mount factory k frame, qa1 UCA’s and bilsteins all 4 corners. Car is...
1973 factory front sway bar off my 73’ Duster 13/16” dia.
Includes poly stabilizer end links, new poly bushings and mounting brackets. I only have 1 sway bar bushing bracket, the other was broken unfortunately.
Asking $75 will ship at buyers expense.
Located Allentown Pa 18031
Anyone running the Hellwig front sway bar 1 1/8" wouldn't happen to be able to provide me the length of the spacer used in the kit? Was shorted some hardware in my kit and want to run up to the hardware store today, thanks!
Finalized my @DoctorDiff install today on the 73 Duster, dropped new fuel sender in while rear was out, took a nice shower in 93 octane but I have a gas gauge again. New bilsteins on all 4 sides and swapped in new ebrake cables and wheel cylinders. This car sat for 15years before I bought it...