Search results for query: *

Hey guys. I wanted to let you know that everything works. you can do it like I said. the 73 axle has screwable adjusters, the 72 has shims. the carrier and the bearings have the same dimensions. thank you for your help. ✌️

Yes, it works. you can install a differential carrier from the pre-1973 axle to a post-1973 one. The bevel gear is also identical. the thru axles have 25 splines.

I don't want to drill. there is too little material left. I think the only thing left for me is to swap the cage of the 4 inch axle into the 4.5 inch axle. then replace the inner gears of the cage with the setup from richmond, which fits my splines on the larger axle. I'll let you know if...

the current setup is at 4.5 inches on my Dart. In Germany I can't get a suitable differential basket for the 7.25 rear axle. My brother currently lives near Washington DC but can't find anything suitable either. I found a 7.25 rear axle in my area but with the 4 inch bolt circle. Normally I...

Thanks for the feedback. the brake lines and everything else fits. I planned to just remove the plugged axles of the 4 inch ones and replace them with the larger 4.5 inch ones. The large bolt circle is currently installed in the car. I currently have the 4.5 inch rims on it. Basically I...

Hello! I am Philipp from Germany. My car is a 1973 Dodge Dart Swinger 318cui. Thank you for being a part of FABO! sorry, my phone translated it automatically, I had written it in English.

Hello. I have a 7.25 axle from a 1972 Dodge Dart and a 7.25 axle from a 1973 Dodge Dart. Now the question: the axle from 1972 has a bolt circle of 4 inches. However, the axle from 1973 was 4.5 inches. could I remove the drive shaft from the smaller 4 inch axle and swap it for my 4.5 inch...

Hallo! Ich bin Philipp aus Deutschland. Mein Auto ist ein Dodge Dart Swinger 318cui aus dem Jahr 1973. Danke, ein Teil von FABO zu sein!