Search results for query: *

  1. K

    Original Cragar lug wrench and oem cragar lug nuts

    Found these in my old tool box, (along with my old 68 Roadrunner door emblem). The lug nuts are in very good shape as is the Wrench. The Wrench came along with the original cragars pictured on the 68 Form S. These were installed right after the original owner bought the Fish. Are they better...
  2. K

    Gentleman from San Diego that bought this 68 Form S B' Cuda from Palm Springs area.

    Admin please don't put this in another forum, as the guy who bought it will probably never look there. I finally found the vin tag for my old fish, to prove it's a real Form S and want to get it to the new owner. Please contact me if you bought it or know who did. Kevin,
  3. K

    Looking for the Gentleman that bought my 68, FormS, Fastback, in Bermuda Dunes, Ca

    He lived in San Diego, Ca, area. Engine was out of the car. Had a short Pistol Grip shifter. Kinda off green paint. I have something special for the car for you! Please contact me. Kevin Jonker
  4. K

    Your opinion please on a Ypipe variation

    1st off we are not selling these. We are looking for a company/manufactuer to carry our designs forward but we are not intending to manufacture. That being said, Is this something that picks your interest? Does it have merit in your eyes? https://youtu.be/XbfW6JpXA3s
  5. K

    [FOR SALE] 1968 Form S 340 4 Spd Fastback Barracuda

    Well due to bad shoulders, back and neck and business ventures, I am selling my B'Cuda. Vin # BH29P8B169038. Factory 340, 4 Spd. Fastback. Power disc brake, manual steering car. We just recently moved and i put the fender tag someplace safe and now I can't find it... It's here somewhere. Anyway...
  6. K

    If you have electric exhaust cutouts

    Could anyone with this style of motor on their electric cutouts, check and see if there are any manufacturing or model numbers on the motors? I would like to be able to find the manufacturer and buy this style of motor for some experimentation. thanks.
  7. K

    Come save us in Southern Kalifornia (you'll love the weather)

    If we could get rational, common sense people to move here and vote out the knuckleheads, this state has it all. By the way it's been averaging in the mid 70's here for a while now. Nights get frosty getting into the high 30's to high 40's... I know terrible huh?
  8. K

    Anybody use AAA to move engineless car before?

    I am moving 4 miles away in two weeks and wondered if AAA would come out and flatbed the car to new home without questions? I pay for the enhanced towing (100 miles).
  9. K

    What is the most common exhaust pipe diameter on enthusiasts cars?

    Is 2.5" the most common for V8's? What does a 4cyl/6cyl use these days? The reason I ask, is I have a patent pending exhaust modification and need to make sure I choose the most desirable/common diameter to start out with for tooling purposes and sales. then if it is deemed popular/profitable...
  10. K

    Am I Crazy, radiusing rear wheel wells on orig. Form S 340 FB Cuda, for SS look?

    I want the car to have a tall rear tire. I don't like the look of a short tire on these cars. The rear quarter just dwarfs the short tire. I would like to run, say a 29" tall, 10 to 11 " wide tire. I wouldn't necessarily modify the inside as the orig ss cars had some tire outside the body line...
  11. K

    Grease for turn signal switch?

    Any one know what kind of grease was used in the turn signal lever switch? The stuff in there is pretty old and thick. I thought I would get out what I could and replace what I could. I wasn't sure if it had to be electrical type?
  12. K

    AArrgghh, Failing at getting turn signal harness up steering column...

    I have had no luck getting the harness started down the column. The coat hanger is to big when I try to tape the harness ends to it. It makes to thick a bundle. Any suggestions fellow Mopar Freaks?
  13. K

    Whats your feeling on Professional Products

    Now that they have been around awhile? I do have one of their harmonic balancers. I have had no trouble with it so far.
  14. K

    Who were some of the old school head machinists?

    I have a set of modified t/a heads that were done by a well known head machining company here in Ca. back in the late 70's early 80's. For the life of me i can't remember their name... Can anyone throw some names out there? There was actually a article on the manuf. and the mods in, i believe...
  15. K

    Open headers vs any muffled system

    It seems no one can agree on which muffler design sounds best. Do most of us agree that open headers sound awesome? I have never had a open headered race car go idling by at a drag strip and heard people say, boy i wish they'ed get some mufflers on that thing... Or when a rod rumbles by with the...
  16. K

    741 center section with 4:56 gears and clutch sure grip.

    I went with a 489 case, new gears and lockright. Improved my 60ft times by a 10th... The sure grip probably could use a rebuild as one tire was wearing more then the other. Be nice not to have to ship. Anyone in southern kalifornia need this? Asking $275.00 OBO Located in Indio, Ca Thx, Kevin
  17. K

    To grease or not to grease a bronze oil lite input shaft bushing???

    What are your experiences/thoughts on this? I'm told not to by clutch manufactuers but...
  18. K

    Bad noise when clutch is disengaged! Help

    When clutch is pushed in loud screeching! The clutch setup, pilot bushing and Ram billet flywheel don't have 1000 miles and 7 1/4 mile passes on them. It's a centerforce dual friction with their T.O bearing. Does it look like the fingers on the clutch are not being evenly pressed down? I might...
  19. K

    Does someone make a superior throwout bearing?

    Are they all manufactured by the same company or are there superior ones? My DF centerforce throwout bearing is making noise already. We installed a new pilot bushing with the clutch setup., I will ck it also but I want to order the TO bearing before I pull the tranny. I can always send it back.
  20. K

    741 center section with 4:56 gears and clutch sure grip.

    I went with a 489 case, new gears and lockright. Improved my 60ft times by a 10th... The sure grip probably could use a rebuild as one tire was wearing more then the other. Be nice not to have to ship. Anyone in socal need this? Asking $275.00 OBO Located in Indio, Ca Thx, Kevin
  21. K

    One more time, 4 speed burnout with 4 speed

    Which gear do you 4 speed guys do your burnouts in?
  22. K

    I need 2 14x7 or 14x8 5 on 4 wheels Don't care what they look like

    I need rims for my new stickies. Anyone have some 14x7 or 14x8 wheels, 5 on 4 bolt pattern as long as they hold air/aren't bent, I don't care. need them to be reasonable. Thx
  23. K

    Where do you folks attach your line lock button?

    I have a 1971 B body bucket seat? pistol grip shifter. It's the real short one. I was thinking of velcroing the line lock button toward the bottom of the shifter arm for racing (running the wire under the carpet and thru the shifter boot). I will use bullet connectors so that I can take it out...
  24. K

    Advise needed on linelock/4 speed drag racing

    Can you use the linelock to take the slack out of the drivetrain on the line? Thinking to reduce the shock on takeoff. Does that make sense? I guess mounting it to the steering wheel temporarily would be best as I would only use it at the track. thoughts? thx, kevin
  25. K

    NEED HELP! Need the spider gears pin (shaft) for a 489 open case!

    Putting the 3rd member together and the pin is toast! It's 5 3/8 " long by 7/8" across. Does anyone have one in Socal or anywhere else? Everythings almost ready to go together for Sept. 17th grudge race against my rustang buddy. Really appreciate any help. Thx, Kevin
  26. K

    Does anybody have American Outlaw 1, 15" wheels 5 on 4?

    I hate to buy 14 inch tires just to keep the fish on the road. I want to go to 15" rims. I have 14 x 7 American racing outlaw 1's on it now (centerline lookalikes). I have the money to go to the rims and tires, ss springs and shocks but not big bolt pattern axles and brakes setup ( and don't see...
  27. K

    Why couldn't I towbar my fish to cruises or drags?

    I can't afford a trailer or have a vehicle to tow it with, or place to park it. It has been a method of towing for years and still is. I see them quite often on I10. I have a 03 Lexus GX470 ( no I am not rich, wifes all around real estate/ personal car, plus i like having 4 wheel drive when you...
  28. K

    How do you tell for sure if fan is pusher, puller or both?

    The 16 inch fan I have shows airflow one way on the label. Stupid question but... does that indicate it is only a pusher? Thanks folks.
  29. K

    New griffin dominator rad installed, upper rad. hose never fills.

    I can squeeze the upper hose closed with no problem after the temp gause reads 200. I got some good advice from fishy68. What I am wondering since the thermostat was new 6 months and probably 100 miles ago, if I have a air pocket? I don't think the stat is even opening. would an air pocket...
  30. K

    If you use the 3" Inboard kit, do you have to minitub?

    In other words, does it still give you more room than just using the 3/4" offset shackle kit? Without mini tubbing it does it give you say an inch more clearance? or more? Thx, Kevin
Back
Top