Search results for query: *

Update: All fixed. Thank you to those who answered my original question regarding the vent tube and gas cap. I used the wix filter as planned, but ran a new return line. That took care of my vapor problem as expected.

Appreciate the advice. When I say it helped, the stumbling/dying, falling on its face, not taking throttle of any kind, however you want to describe it, no longer happens when the car has been stopped at a light or idling around in slow traffic. It does still happen when I park, shut it off for...

I'll reroute it, however I will say the rubber line is much further away from the header than the hardline. The hardline currently jogs over into the engine bay along the inside of the frame rail and runs right next to the header collector on its way to the factory fuel pump location. This...

I'll take a better look at this. I did glance over it while I was under there, and the clamp is higher up on the hose than the picture suggests, and the gap is where the tube starts to make it's bend. The clamp was tight, and since I only had issues when it was hot, I figured it was not the...

I appreciate this info. So if I add the older vent style to my filler tube, can I then use the existing vent tube as my fuel/vapor return line? I also have that blocked off port on my sending unit, which after some googling, looks like it is a return port. Using the existing 1/4 inch line would...

I've seen those recommended. Which is worth looking into. With the mechanical pump, I figured it was cavitating due to vapor. But with the electric, it should push the vapor into the carb and vent it out until it gets enough fuel to shut off the bowls, right? I would think that would happen fast...

I was looking at that. The stock line goes right along the frame rail, next to the header. Now that I don't have the mechanical pump, I can route the lines however I want. I did wrap the bottom of the header with a heat wrap and put a sleeve over that part of the fuel line. Just to see if it...

First time poster here. I just bought this Dart a month ago, and it was my first experience with old American cars. I've fixed a lot of small things with the help of the search button on this site, but I'm running into a problem and I can't find what I need without posting. This is a 1975 dart...