Search results for query: *

After about a year and a half of investigating, comparing and learning about enclosed trailers, I’ve finally decided to buy one. Im going with Discovery Trailers built in Elkhart Indiana. My neighbor has a Discovery trailer he had built back in 2019 and has served him flawlessly and I have 2...

Hey all! Was going to make a last trip to the track and brave the 45-50 degree temps last weekend. Fired up the Demon, took it for a ride, gave it a good checking over and parked it Friday night. Went to fire it up and put it on the trailer Saturday - cranked it…….no fire. Did it a few...

Mopar W-5 Intake manifold. P4452893. I believe it’s never been bolted on an engine. Some knife edging in the plenum, ports are untouched. Nicely powder coated aluminum color. $300, buyer covers shipping. PM here - in SE Wisconsin

About to pull my hair out with electrical issues.....Maybe it's just me, It's my least favorite or skilled thing to do. I have Stock wiring harnesses in the car, the Under dash one is original. I have the battery in the trunk - wired to a shutoff switch, I'm just working on getting power to the...

I know this has been discussed, can’t find any threads. Small block LA, Eddy heads, Super Victor intake, valve covers hit the intake. I’m sure some of you have come across this, what’s the best remedy? Thanks all!! Wally.

Working on my Demon, about to be ready to drop in engine/trans. Looking for what spark plugs, oil, and trans fluid to use. I know this is a lot, but I might as well throw it all in one thread. ‘72 Demon all steel....owned it since I was 15 (1983) glass hood, stock interior. 360, .30 over...

All, The Small Block M1 I have does not have any place for the temp gauge probe. Any suggestions on a good place to put one? Or I may end up getting one of the new "Trick Flow" Intakes. Thanks All!

All, Looking for opinions on what you have experienced with Trans cooler and Trans Cooler lines. Hoping My Demon will be mid 11's - small block w/904. 50/50 Street-strip. There seems to be a lot of different ones out there?? Is a fan needed for trans cooler? Looking at running -6 AN lines. Any...

WANTED Small block LA Super Victor Intake. PM here. Thanks

I bought one of the vinyl covered abs headliners from Classic. I took the car apart 5 years ago, and don’t remember exactly how it goes back together. Are there any special tricks or advice? Is there a trim around the rear window? I can’t find any if so. Are there sail panels? I have the...

About to mount my fuel pump, and run fuel line. Any pics showing where you guys think the best place to mount the pump and filter? Thanks all!

All, I can’t find anywhere a diagram showing exactly how the rear bumper brackets mount on the body for my ‘72 Demon. I’ve looked through the body service manual and searched the web. Any chance anyone took pics with them on the car before the bumper was put on? Like an idiot, I did not. Thanks...

All, I’ve read some place that a 1 piece oil pan gasket is available for the 360LA block but I can only find one for a ‘92 and up magnum. Are they the same? I apologize if this has been covered here before - I’ve tried to do every search I know, but no luck. Thank all! Wally.

Looking to see what vendors and who from here will be at the March Indy show? Thanks all! Wally.

Running the Stock '73-'73 A body front disc brakes and converting the rears to the Disc brake kit from The right stuff on my '72 Demon, Looking at a Wilwood M/C - prop valve (Looks like good quality) What bore size for 4 wheel disc manual brakes, and what prop. valve? Thanks all! Wally.

looking for good ‘72 Dart grill and ‘71/72 Demon tail lights. PM here. Thabks all!

I was looking for New (Re-Pop) Door Latches for my '72 Demon. I can only find from Yr. One or Classified they make them for '68 A - bodies. I assume they will NOT work with a '72 Demon?? I thought all the doors were the same (besides Vent glass) Thanks all!! Wally

All, About to mock up stock tank (w/sump) Would like ideas and or pics of electric fuel pump and filter mounting under the back of the car. "Thinking" about making an aluminum plate with shock mounted studs to the underside and mounting the pump and filter on that??? Thanks in advance!! Wally.

Does anyone make a stock A body gas tank with a welded in sump and an AN hook up ready to bolt in? I don’t want to put in a cell as the trunk and under side of the body is painted already and 8 don’t want to cut up the truck floor. Thanks all! Wally.

Starting to build a 360/420ish? Using a 4.125 crank, eddy heads, hyd. roller, etc. I’ve read good things about the Kevko pans. I’d like it as stock looking as possible, was thinking the one that holds 5 quarts (Making it a 6 quart system) Thoughts or any real life experiences with Kevko...

All, I’m thinking of running a 10” rim on back of my Demon. Stock wheel well and stock wheel tub, springs moved in 3”. Have a deal,on 15x10” with 4 1/2” backspace. I’ve rin 15x8” in the past with 4 1/2” backspacing, wondering if the 2 extra inches will rub on either inside or outer wheel...

We’re putting on our annual car show Sunday June 10th. The 4th annual Hot Cars on Ice! Sunday June 10th 2018 Kenosha Ice Arena, 7727 60th Ave. Kenosha WI 53143 8 a.m. - 2 p.m. The Kenosha Adult Hockey Club would like to welcome everyone to the 4th annual Hot Cars on Ice car show! All makes and...

All, Have stock wheel well and wheel opening on my Demon. Rear springs are moved in 3". Would a 15x10" wheel work? What offset....5 1/2"? Also, what would the best tire size be for this wheel/stock wheel opening. Pics if you have them please?? Thanks guys!! Wally.

Looking for 15x7 Cragar SST. CHROME WHEELS in good shape! Also any 14" or 15" plain black wheel for rolling car around. (Cheap) Thanks all!

IN need of a dash frame for 72 Demon. Some years and models are the same, not 100% sure of all of them. I don't need a rally dash, just the standard gauge cluster. I don't want one with the holes for the dash trim. In SE Wisconsin. Local would be nice but will pay for shipping. PM here...

Looking for the gas filler tube from a '74 through '76 Duster that had the fold down rear seat and the panel that folded down into the trunk. The tube has a bend in it to be close to the trunk floor so the panel can lay down in to the trunk. Thank you FABO

As the title says, I'm in need of a trunk lid for '72 and later Demon/Duster trunk lid. (With the center ridge) Prefer within Driving distance of SE Wisconsin. Would like clean, as rust free as possible. Thank you!!

I knew this at one time.....I'm sure it's been asked here plenty. What cars are correct for the trunk lid with the ridge, and which ones use the "no ridge"? Thanks in advance! Wally

In need of a drivers side door for a '70 - '72 Duster or '71 - '72 Demon that's in good solid condition. In SE Wisconsin. Thanks! Wally.

I'm in need of a drivers side door for a '72 Demon. I need a memory refreshing - will any year Dart/Duster door fit? I want the inside door handle in the same spot, so 67 - 72? If the door is off of (for example) '67 Dart, the vent frame and glass can just be removed, correct? Any tips or...