Search results for query: *

  1. C

    Speedometer Cable

    I just found the issue, the lock tap at speedo has a small broken piece and not allowing it snap in. It is a clean break so it looked like that’s the way it was supposed to be. Thanks again for all the info
  2. C

    Speedometer Cable

    Thanks for the info! It is definitely the plastic end going to the speedo. I removed the plastic end from the cable and it bottoms out before it snaps in.
  3. C

    Speedometer Cable

    Anyone have a link for a correct fitting speedometer cable for a 69 Valiant with 727? I purchased one from EBay, the length and the trans end was ok but speedometer end would not snap in. The nylon end is not deep enough.
  4. C

    Bolt in aftermarket bucket seat tracks

    Does anybody know if there are aftermarket bucket seat tracks that go in factory floor pan holes for a 69 A body?
  5. C

    Shock hardware

    Perfect, Thanks
  6. C

    440 in 72 Dart Swinger?

    Put a 400 stroker (470) in my 69 Valiant. All I can say is if you use Schumacher shortie headers there is plenty of room.
  7. C

    seat track question

    Thanks for the info
  8. C

    seat track question

    Can you tell me what the height measurement is for those tracks?
  9. C

    Factory bucket seat track height

    Trying to put aftermarket bucket seats in my 69 Valiant. I bought a set of repop super stock seat brackets but the seat is to high as I’m 6 2ft. So I’m going to make my own brackets. I had previous bucket seat A body and they fit fine. So I figured that height of seat track will work. Anybody...
  10. C

    Shock hardware

    Need the top and bottom shock absorber washers and nuts for a 69 Valiant with a 8 3/4, anybody have a source for them?
  11. C

    Denso alt wiring

    Haven’t started vehicle yet,just trying to get everything sorted before firing. Since new alt is internal regulated,just wondering if original regulator wires need to connect to new alt or just leave disconnected?
  12. C

    Denso alt wiring

    I have installed the Toyota denso alt in my 69 Valiant, my question is do I have to do anything with the original wires that go to the factory mechanical voltage regulator, or just leave them disconnected?
  13. C

    Denso belt suggestion

    Thanks for all the info
  14. C

    Denso belt suggestion

    Thanks for your info. The belt I need is a stock style v belt. May try a stock belt that fits the original style alt?
  15. C

    Denso belt suggestion

    Have a big block with denso alt, just wondering if anybody has a part number or application for the alt belt? I am just running from crank to water pump to alt, no ps or ac.
  16. C

    Amp gauge bypass

    I’m using 8 awg from alt to solenoid with a maxi fuse in line. The engine, forward light and rear light harnesses are new, the dash harness is original and I cleaned all pins. The cluster is still out so should I still connect the amp meter wires together even though I ran the separate alt wire?
  17. C

    Overloaded starter relay

    Thanks for all the info
  18. C

    Overloaded starter relay

    Have a 69 Valiant with 470 bb, I put in a denso 3 wire alt and I ran it to the relay to take load of amp meter and ran sense wire to relay also. So I have 2 wires from the alt going to the relay battery stud as well as the two wires from the factory harness going to the stud also. The issue is...
  19. C

    Amp gauge bypass

    Thanks for the info, I did put a maxi fuse in-line with new wire to starter relay.
  20. C

    Amp gauge bypass

    1969 Valiant 470 big block with denso 3 wire alternator.
  21. C

    Amp gauge bypass

    I’m running a wire from alt to starter relay, just wondering if I should keep the original charging wire on the alt also?
  22. C

    Engine install from below?

    This how I did mine,I put suspension in after.
  23. C

    Denso alternator wiring

    Thanks for the info
  24. C

    Denso alternator wiring

    It’s a 69 Valiant. I’m putting the car back together. There is no issue with the bulk connector,just trying to prevent any future issues. I will be installing a fuse or a link.
  25. C

    Denso alternator wiring

    Installing Denso alternator. My question is,do I keep the factory charge wire connected to the alternator? I will be running a separate wire from alternator to starter relay and I’m keeping the amp gauge hooked up. Just didn’t know if there will be two wires on the alternator stud.
  26. C

    [FOR SALE] 1973 A Body Manual Steering linkage

    If you want to ship, let me know cost to 01468. Thanks!!
  27. C

    Oil dipstick with spool mount and Schumacher headers

    Thanks for the info, will check those out.
  28. C

    Oil dipstick with spool mount and Schumacher headers

    Have a 69 Valiant with spool mount k member/400 with stealth heads/727 and Schumacher shorty headers. There is no way the factory engine oil dipstick tube is going to work( with out serious rework). Just wondering if someone has sure fit alternate?
  29. C

    67-69 Valiant door panels

    Just wanted to know if all years interchange? I have a 69 2 door. Can’t find panels for a 69 but 67 and 68 are available. Not doing a restoration so other styles are ok, just want to know if clips,window crank holes, armrest holes are the same?
Back
Top