Search results for query: *

If you want to run "square", your best bet with a Duster is 18x9.5's with a 68-70 B body 8 3/4 out back. You run 18x9.5's with about 35mm of offset, and 275/35/18's all the way around. That would require pretty much no bodywork and would clear on the street. With a BBP A-body 8/3 the rear will...

Thanks for all the info guys. I am more focused on the rim size and knew 315 was way more than I need or wanted. Just seems that article drove the thread that way. I tried a 17X10 rim with 275/40 my buddy had laying around. The inside of the rim rubbed the tinniest bit on the top of the upper...

Yes, that is one of the articles I saw. The 25mm reference is from that article. Doing a little more research, I believe the other article was on Wracks71 Duster. I am running the QA1 6 link setup out the back; so no leaf springs to reference. The bars do utilize the stock shackle holes.

Thanks, just posted this in my own thread. Just didn't want to be one of those guys where everyone says that there are 10 posts on the subject all ready.

Hi guys, I am looking for a little help. I recently installed a QA1 suspension on all four corners of my 1970 Duster 340. I am looking to take her to both track and autocross events. I also upgraded to the 5X4.5 bolt pattern all around. I am looking at 18x10 inch rims currently. Does anyone have...

Hi guys, I am looking for a little help. I recently installed a QA1 suspension on all four corners of my 1970 Duster 340. I am looking to take her to both track and autocross events. I also upgraded to the 5X4.5 bolt pattern all around. I am looking at 18x10 inch rims currently. Does anyone...

I am looking for the entire antenna set up if available.

If your parting her out I am looking for an antenna; can't see if its there from the pics.

Looking for an antenna, is it available?

Thats it, I am missing one of the wiper Pivots

Thanks I am not sure what its actually called but its a little nut that sits on top of the wiper linkage to connect the wiper arms to the linkage. It kind of looks like an acorn with ridges along the sides.

I am only looking for the arms and the top nut that connects the arm to the linkage. I have a motor and linkage already.

I would be interested in the windshield wiper arms and the motor cap nut underneath them if the wipers are in good shape.

looking for windshield wiper arms and motor arm caps

Price dropped to $350.00 Anyone have a suggestion on where else I should post this since I am guessing it's not for an A-body. Bump

I have a Centerforce 143 tooth flywheel for sale. It is as close to new condition as you can get without being NIB. It was mounted to my motor but never installed in a running car. I didn’t realize until I went to slide the transmission on that that I need 130 tooth flywheel. I was unable to...

Thanks for running down all that information for me. I will let you know how I make out after I take it to a place in Jersey.

Yes, I believe I could get my old flywheel resurfaced. I wasn't sure of how much that would cost and I don’t know of any good machine shops in the North Jersey area. If anyone knows of any please don’t hesitate to chime in. As far as getting the bell housing done, I have no idea where to take it...

I just triple checked and the clutch disc measures 10.5 so that should at least be right. I hear what you’re saying about the bell housing and that's what I said to him. However, I didn't trust my gut and already ground down the bell housing so what's done is done. The crappy part is that it...

Ok so hear is the deal my buddy owns a garage and told me that he would order parts for me to save me a little cash since I am on a tight budget. I asked him to get me a new clutch, flywheel, throw out bearing, pilot bushing, and alignment tool. He got the parts for me from centerforce and...

I would be interested in a non-trucker hat in black.

I have a family member who restores cars professionally and he says that Keepitcleanwiring is cheap sh*t from china, just my two cents.

I just thought that other members might find this interesting. Hemmings came out with a list of the 32 best cars to restore. It was nice to see an A-body recognized along with many other obvious Mopars. http://www.hemmings.com/hcc/stories/2010/06/01/hmn_feature2.html Plymouth Duster --...

I know you introduced me to ken lol. He did a great job and you know from my PM a while back what my exigent circumstances were. The reason i am asking these questions is i have a connection that can get me a new clutch, pressure plate, and flywheel at a reason able price. The questions at...

Oh! I forgot to explain that I that the fingers on the pressure plate ended up getting bent while taking to motor out of the car. There was no damage to the pressure plate while it was installed in the car. This is my first classic car build and I am sorry if I am making this confusing. The...

I had my motor rebuilt by Physixx AKA Ken about 2 years ago. When we took it apart he suggested that I replace the flywheel and clutch. The reasoning behind it was, that since I had everything apart it would be easier to do. Unfortunately due to some exigent circumstances and low cash flow I...

Thanks for all the replies. I had the clutch and flywheel out about 2 years ago. At the time I just didn’t have the money to replace the flywheel and clutch. It's the original flywheel with a 10.5 clutch. Thanks again for the info.

Ok so I am planning on replacing the clutch and flywheel on my '70 Duster but wanted to ask a few questions before I disassembled everything. I have a 340 4 speed car and wanted to know how many splines my A833 transmission has? I am asking because I want to have the parts before I drop...

First off, I want to say thanks to the guys and girls who came up with this idea. It’s not often people think about us “Young Guns.” My name is Justin, I am 25, and I am working on restoring my 1970 Duster 340. I found it in my home state of New Jersey. I grew up with my dad talking about...

It could go either way. I have a Black lab named Hemi (can't tell I am a Mopar guy lol) he is 112lbs of muscle and has eaten a number of different things. First when he was a pup I spent half of Christmas Eve at the vet because the dumb A$$ at a rock that was the size of a racquetball, $2500...