Search results for query: *

so i was looking online in how to properly install a oil pan gasket on my 318. I notice there are two styles : one with multiple holes and one without the holes on the bottom of the oil pan. I got the one without the holding holes. I think its also a mildon performance pan forgot part number I...

hello ForAbodiesonly, I haven't been here in a long time cause life has been busy for me (started here since i was 16 and been lurking back then) and i haven't had the time to play around with my car but since i am getting back to fixing my car Im a little rusty but not dead yet. Car is a...

I am doing a conversion to my '72 demon which has a slant six and a 904 transmission and i want to replace it with a stroked 318 block (from 1969 which has 4 holes on both sides that hold the bracket to the block)with a 727 transmission. I been looking around and i notice that most of the...

I was wondering how far is the heavy duty selector shaft seal suppose to go in? I just re-took out the new regular seal i installed a few months ago because it leaked. I got this new one from ebay and did a comparison. the ebay one is taller and more heavy duty. I installed it on the car today...

Ok i am having a slight problem with my new torque converter that i purchased from autozone a month ago. I install the converter to the tranny and connected everything back. I then went and tried to install the torque converter bolts to the flexplate but for some reason they don't want to align...

Vehicle: 1974 Plymouth Scamp Engine: Slant six Transmission: 904 torque-flight (Auto) Price: $6800 or Make offer Location: Staten island New York Payment Method: Cash Shipping: Pick-up only Title: Clear NY title in my name I am selling my 1974 Plymouth Scamp 2 door Hardtop coupe. It has a Slant...

I have a slight problem with my 1974 Dodge dart. its a slant six auto and its electric ignition. My car doesn't start up and i mostly did everything i remembered reading about electrical gremlins for the slant six but..... I may forget something (Im human mistakes happen).#-o When you...

I have another tranny problem that maybe you guys can help me with or at least give me some ideas that i am overlooking.... well here it goes... I have a 1973 dodge dart Slant six engine and a A904 automatic transmission. It was out of commission for a whole year - engine and tranny were...

hello everyone, I have a slight problem that i need to repair quickly. my exhaust pipe from my slanty rusted off completely around the exhaust manifold area and i had a hard time getting back home from work. now im trying to find a new replacement exhaust pipe but everywhere i try i can't seem...

Right now Im trying to finsh building my '74 Plymouth Scamp which is mostly alot of small pieces. I decided to tackle the AC/Heater box unit since its in the way of my wiring. I don't want the AC portion back in my car so i took it apart and now only have the heater portion back on the car...

I was wondering how would you go about polishing or at least shining something that doesn't look like aluminum? I have a '74 rear tail panel plate (rear finish panel, rear backplate, ect...) that i want to clean it up and give it a nice shine nothing too crazy. should i be looking for a chrome...

hello, I am trying to sell my 1970 Plymouth Valiant. The Car body is very solid for its age, interior is in great shape as well. The only thing wrong is the engine - It has a knock and smokes alot. Engine will need to be rebuild or replace. I picked up the car for the reason that it was clean...

I was wondering how hard would it be to convert a plain jane 1970s & up dart/valiant/scamp and turn them into a convertible. I know that they don't exsist but browsing at a few pictures online and saw a nice blue 1971 dart convertible. I think it looks amazing and wished i had one. I know from...

As the title saids - I have a slightly small problem with my holley 350 carburetor #2300 on my stock slant six. I was test driving the car when all of a sudden it started to shake like crazy and was losing power until... it actually shutoff. I was close to home and there was no one around so i...

I been curious and wanted to get some imput on the modern plastic body master cylinders in mopars. I know that you need an adapter plate and the bore size is the same as the stock M.C. which is 1.031 do they perform the same as a cast iron one? any safety issues? don't want to fall off a...

Hello all, I was wondering if you guys could help me out. I was wondering can I remove the AC compressor and all it components or would I need to buy a few items like Pulley, harmonic balancer, Alternator bracket, ect... Or is it just remove the compressor/ anything AC related, add a non AC...

Selling my extra parts because i need to clean up and make some space. I have about 4 sets of sedan doors. I am asking $100.00 for each door. some have the panels and hinges still on them. It would have to be pick up only. doors are too big and too heavy to ship. I am located on Staten island...

was wondering if anyone had a spare rear bumper for a 1972 Dodge demon. a daily driver bumper without heavy pittings, holes or dents if possible. send me some pictures and price

Hi everyone, I am having a few small electrical issues with dodge. The car was a big project but now it is almost done and I wanted to test out the engine by starting it and letting everything get warmed to see if it has any leaks or problems. with that said, I did tried to start the car but...

I have a NOS Mopar Slant six electronic distributor. I opened the box myself and it looks in mint new condition. It has cap and rotor included with the distributor. not sure of the Year it came out because box has no info - just the numbers on the distributor. Original box not pictured but will...

I kind of need some help in a DIY transmission line - just a few questions The car is a Dodge dart - Slant six - automatic transmission 904. I wanted to replace both lines since they were rusted out (broken) and what better way then to just make my own. Reason I want to go this route is...

Hi, I am looking for two 15 inch Mag Slot rims Deep dish - Large bolt pattern for my A-body. I need them for the rear of my car. would like to get them for my car, thanks everyone

For sale is a 1972 Dodge Coronet, car is mostly all original, low miles of 89,000 and body is in very good condition for its age. It has a 318 motor and an automatic transmission. Car drives excellent and handles smooth. I purchase the car from an elderly person. the car was garage kept most of...

sorry for these simple questions but I just wanted to be clear and feel reassured before we put the engine back in the car right now the engine is out of the car and is being Cleaned, primed, painted and updated since it needs it badly, nothing to big since our budget and time is tight. I had...

I been searching around a few websites looking to upgrade my whole suspension (rubber bushing wise). Since I know the car needs an update and would like to change anything rubber under the car as much as I possibly can. where can I get a kit with almost everything I need? Im guessing...

Hello everyone, first off if I am using the words/part names incorrectly please correct me. I have a problem with one of my cars. It is a slant six with a 904 automatic transmission. I found out that i have no reverse at all. So my father and me parked the car in the back, lifted the car and...

We are Parting out a 1974 Dodge Dart Custom 4 door Sedan. I can ship most small stuff through USPS but larger items must be picked up in person because shipping prices are higher and wouldn't like to deal shipping large items. some items are sold already. I do accept Paypal. Let me know what...

I have a small question, I'm trying to make a custom gauge and I wanted to replace all the gauges to modern new gauges. I got the Voltage, water temp and oil pressure gauges but was wondering about the gas gauge. I bought a Sun-pro 1 1/2 inch diameter gauge set and found a 1 1/2 inch gas level...

I know this is a dumb question but I have to ask you guys out for a little help. Also if I'm using the incorrect word terminology please correct me I been looking on line and for some reason I can't seem to find a 9 inch front drums with the hub assembly anywhere. I ordered and got both the...

Hello everyone, I know its not an a-body but maybe someone here can use something. We have to part out a very solid 1972 dodge coronet. The interior is like in near mint condition just a small crack on the dash - could always send some pictures of it. The doors have their original paint, no...