Search results for query: *

  1. SteveAle

    Steve's 70 Gen III Hemi Build

    But hopefully I will make some progress now that I have my own project board to keep me focused... Sorry about language...
  2. SteveAle

    Steve's 70 Gen III Hemi Build

    I have been working on my oil cooler again. I didnt like how much it stuck out below the bumper. So have I since moved the oil cooler up behind bumper and installed it with a slight angle. I plan on welding a piece on the rear of the bumper to force air down through it.
  3. SteveAle

    Steve's 70 Gen III Hemi Build

    I have messed with the Duster a little here and there when time permits. I did manage to get steering column and wheel installed. So I can turn it now lol.
  4. SteveAle

    Steve's 70 Gen III Hemi Build

    I used a LS style cable for my throttle. The transmission cable is the lokar 727 cable. I will dig through my paperwork and see if I have the part numbers wrote down somewhere. Its been a minute since I bought them.
  5. SteveAle

    Steve's 70 Gen III Hemi Build

    I moved the Duster to its new home and did do 1 thing to it while it was here. I had narrowed the rear end another 4 inches and ordered some new wheels and tires. I tried out my new lift and installed my new tires.. Much better.
  6. SteveAle

    Steve's 70 Gen III Hemi Build

    I know its been over a year since my last update. Alot has been going on. I was just about to tear it back down to send off to have final body work and paint when I hit a wall.. Once painted and body put together, the little building I was working out of wasnt gonna work. Doors would hit walls...
  7. SteveAle

    Anyone running aftermarket A/C with their Hemi swap?

    Yes I will be running the control valve under the dash just for the clean look and tight space behind intake.
  8. SteveAle

    [FOR SALE] 70 Duster Wiring Harness Underhood 225ci

    All 3 were hooked up on mine. Tracking number is 9505 5136 6652 0185 3527 97 2nd picture shows 2 of them and 5th picture shows 3rd one.
  9. SteveAle

    [FOR SALE] 70 Duster Wiring Harness Underhood 225ci

    sent out earlier today. So the pictures I posted were all I had. Here is the car side for comparison.
  10. SteveAle

    [FOR SALE] 70 Duster Wiring Harness Underhood 225ci

    PayPal is good. I’ll get you a total. Thanks.
  11. SteveAle

    [FOR SALE] Plymouth Duster Arm Rest Pieces

    All pieces from 1970 Plymouth Duster, Thanks fixed the inbox issue I think
  12. SteveAle

    [FOR SALE] 70 Duster Wiring Harness Underhood 225ci

    I have a underhood wiring harness for sale. Most of all the connectors are intact and the harness hasnt been completly chopped up. Good for someone who needs a replacement or for someone looking for hard to find connectors. I have tried to picture all the connectors I could so you can see...
  13. SteveAle

    [FOR SALE] Plymouth Duster Misc Pieces (horn, mirror, blower)

    High Note Horn, Drivers Mirror with logo, Blower motor ring with seal. I know they are not the best shape but might be of use to someone. Horn 5.00 Mirror 15.00 Blower Ring 5.00 All prices are plus shipping from Granite Falls NC. I will ship flat rate box or whichever is cheaper in all cases.
  14. SteveAle

    [FOR SALE] 1974 Dodge Dart Sport Window Regulators

    I have Drivers and Passengers window regulators out of a 1974 Dodge Dart Sport. Both are in good working order. 100.00 plus shipping from Granite Falls NC for both 50.00 plus shipping from Granite Falls NC for one
  15. SteveAle

    [FOR SALE] Plymouth Duster Arm Rest Pieces

    Bases are not the best 3 of 4 lineup tabs missing one side has crack in pull handle. Armrests are distorted, not completely destroyed. One does have a fairly decent shape ashtray and bezel thou. May be good for someone who needs a decent set for a driver? 50.00 plus shipping to Granite Falls NC
  16. SteveAle

    [FOR SALE] Speaker Fader Switch

    Rear speaker fader switch out of a 1974 Dodge Dart Sport. In great shape, I assume it works (have no way to test) 35.00 Plus shipping from Granite Falls NC
  17. SteveAle

    [FOR SALE] Gas Pedals Duster and Dart

    Long pedal is out of a 1970 Plymouth Duster 225ci. Short pedal is out of a 1974 Dodge Dart Sport with 318ci Both are in excellent shape just need some cleaning and paint. 25.00 plus shipping from Granite Falls NC for either one.
  18. SteveAle

    1970 Duster Doors

    Perfect. Thank you very much. Lots of good info on that page.
  19. SteveAle

    1970 Duster Doors

    Anyone have a diagram of the inside door parts on a 70 duster. I have photographed almost everything on this car except for this and its been over 10 years since I tore it apart... Any help would be appreciated.
  20. SteveAle

    [FOR SALE] A Body Automatic Console + Shifter.

    Anymore pictures or damage to be shown? And were is it located.
  21. SteveAle

    Steve's 70 Gen III Hemi Build

    Well that was about 6 months worth of work lol. Seems like it took longer that that lol. I am gonna move to next part. Fitting seats, console?
  22. SteveAle

    Steve's 70 Gen III Hemi Build

    And the last piece to call the underhood done is the proper way to shut it up. I couldnt resist going ahead and putting it on with it came in lol it was calling to me lol.
  23. SteveAle

    Steve's 70 Gen III Hemi Build

    At final assembly I will match the cables and get the proper length to look nice, but with that all my mockup under the hood is finished. I have made everything I needed and checked it all so here are some shots of my finished up engine compartment (untill paint and final assembly)
  24. SteveAle

    Steve's 70 Gen III Hemi Build

    Ran into one of those step backs. I never did like the way the throttle had to make a big swoop in front of throttle body. Decided to not run a manual A518 so I had to get a TV cable to work somehow. After 3 tries I finally came up with a bracket design that was sturdy and didnt interfere with...
  25. SteveAle

    Steve's 70 Gen III Hemi Build

    Got the aluminum version of my homemade air box back from HotRod shop. It fits perfectly, on final assembly I will put a rubber strip on it to save my paint and not sure but I might powdercoat it or just polish it. Not sure yet.
  26. SteveAle

    Steve's 70 Gen III Hemi Build

    Decided it was time to plumb the power steering lines. I decided it might be smarter for me to invest a little in some plastic tubing to see how i want to run lines and to give myself and idea of how much to buy. Power steering line isnt very cheap and I would hate to have to waste some because...
  27. SteveAle

    Steve's 70 Gen III Hemi Build

    I have been focusing mainly on getting all mockup under hood finished. I have changed things, added things and had to back up a few times and go a different route but its coming together nicely and all functioning like it should.
Back
Top