Search results for query: *

Yes, but I’m a long ways away that’s why I asked w bc at your budget was as shipping will be high

Driver

What’s your budget?

I’ll have that. Message me on thesday, I’ll be home then. Kim

With the rubber insert?

What is the compression distance?

Chris I think this guy can help u. @Max1196

Are these forged?

Thanks, I’m good for rods at the moment.

I may have 1 from a valiant. I can look next week if u still need it. Is it cable or linkage operated?

It really. U can probably make it work by drilling extra holes. Kim

Pic 4 are 7inches long. Their for 69 up as what u have for linkage. 66/67/68 have the clip on the end to snap onto the bell crank. They are 9 inches long. U will have to drill the hole to the next size on the kd lever. Also will need the right bell crank. I have that also. Kim

I’ll measure the legnth and the pin size later this week.

The 505 piston tops are roughed up cause the old man that was gonna ceramic coat the tops. Sadly he passed away b4 he could do the ceramic coating. I got these from his son. Kim

I’ll find a pic. I think .040 could be machined off safely. First 3 pics are the pistons that came in my 543 kit. 1.34 cd and a 26.7 cc dish. The next pics are the 505 pistons. 1.774 cd. I got my .040 from measuring the 543 piston thickness of the dish. The 505 pistons are .040 thicker if...

What was your measurement from the top of the pin hole to the flat of the piston?

That works. So .545+ .105=1.50cd? That’s what you’re saying?

Yes that’s the style I have only seen on 727 trannys big or small block in a car. Kim

The one u r showing us for a 904 tranny. I should have what u need. What size is the ends? Or more impotent size are the holes on the blank and the kd lever. Kim

No, a 4.5 stroke and 1.340 cd is very close to zero deck with a 7.100 rod. A 4.25 crank and a 1.5 cd is pretty much 0 deck. I could also be wrong. Kim

My crank is 4.25 stroke. Rods are 6.8 .990 pins and Chevy size big end. Piston cd is 1.774 13-1 with a 75cc head and .040 gasket. I would like to get down to right around 11-1

V8 ones are a little different. What year is the tranny your gonna be using? I can check my stash. Kim

Hi John, 4.25 stroke. Thanks. Kim

Looking for a new or used set of 4.350 or bigger with a compression distance of 1.50 give or take a few thousands. I have 1.340 cd and 1.774 cd to trade as well. These have .990 pins. Thanks. Kim

John, do u have any carb numbers that these jets will be in? I have 20 or so carbs but I don’t want to be taking them all apart. Kim

I’m not sure the size. I just thought they are probably some odd ball size that MSD used. Kim

Hi there, I’m looking for a few screws to hold the cap on. New or used. Thanks. Kim

1 more pic

Here ya go.

I don’t remember. I’ll try find the ad.