Search results for query: *

I am going to let the car warm up longer and recheck the level again. Thanks for your reply!

Valve Body is a Cheetah 17675. I almost feel like pulling the pan and going over things again. I've checked the level on a flat,level surface after running the car for a minutes. Maybe I need to let it warm up longer then check the level? Thank you for your reply!

I picked up a rebuilt 904 and installed a Cheetah forward manual valve body myself after I picked it up. Thought it was a pretty straight forward install. Well I got everything together and it slips in the forward gears but reverse works good. Like I mentioned,when I put it in any of the...

Thanks! I'll look at that as well.

Ok, I'll tie it back and see how she feels. Thanks!

It's a Cheetah foreward MVB. So I should wire the linkage back if I do not have the linkage hooked up? Thank you for your reply

It's PTC. I've had good experiences with them the past. This will be my 4th convertor from them.

I was not able to confirm that it ran before I installed the manual valve body. I still have the old automatic VB. I'll put that in and see what happens. Thank you.

Nope fluid looks and smells fine. Thanks for your reply

So I picked up a rebuilt 904 and installed a forward manual valve body myself after I bought it. Seemed easy enough to install the valve body so I decided to do it myself. On my first trip out it slips in the forward gears and doesn't shift firmly into any of the gears either. It does...

I've had 3 different PTC convertors in the past. Never a problem. Excellent convertors and great staff on their end. As stated above, as long as PTC was given the correct information with the complete car set up you should be golden.

Ok, thanks for the information! Much appreciated!

Whoops, forgot to put that in,thanks. A short shaft 904.

In my 74 Scamp I swapped out the /6 and 7 1/4 for a 360 and 8 3/4. Any idea and what my drive shaft length should be now from cap to cap? Thank you.

What size U bolts do I need for an A body 8 3/4? Thank you.

Thanks a ton for the valuable advise!

It's been years since I've put a 8 3/4 togther. I cannot remember does the spring side of the inner seal face in or out? Thznks.

Thanks Rick for the advise and thanks to everyone else for the replies!

That's what I was hoping to hear! That's guys.

Looking at a used 9.5 Dynamic convertor for my 360/904. Anyone use Dynamic? Thanks.

I'm going to be running a forward manual valve body. Can you guys recommend me a rachet shifter? Thanks!:burnout:

Ok,thanks for the replies>. I'll just leave them in. Thanks!

I'm installing a Manual Valve body in my 904 and it's telling me to remove the governor valves if transmission is out of the car. I have no idea where these are or what they look like. Any pics or can someone tell me where they are? Thanks.

Great info. Thanks !!

I bought a Hurst Quarter Stick and the guys I bought it from told me he"thinks" its for a reverse manual vb. Is there a way to tell for sure without installing and hooking up the shifter? Thanks.

I'm thinking of installing a Tranzact rmvb in my rebuilt 904. What other parts should I look into installing with the valve body? Thanks.

In what order does the foam gasket/tin gasket and backing plate go on when installing axles in a 8 3/4? Thanks,its been a while since I've done this.

AWESOME!! Thanks O ton!

Perfect! Thanks Badsport!

I'm looking for a shop book on rebuilding a HP 904. Does one exsist? Thanks!