Search results for query: *

I added the following conclusion to a thread that I had started a while back about the issue I was experiencing. The bottom line is, the tolerances on the transmission main shafts from Mopar, and the tolerances on the factory yokes as well as the aftermarket ones are all over the map. Creating a...

Marty, I will need to get special tools to measure the yoke, but I will try to get those numbers. I just finished measuring a 727 spline and found the following: Major= 1.277 Minor= 1.191 The major is obviously .002 larger than than measurement on my 833, but the minor...

Measured the spline on both of my mainshafts last night. They show the following: Original Shaft Major= 1.275 Minor= 1.273 Used Replacement Shaft Major= 1.273 Minor= 1.271 Interesting, a...

Thanks for the confirmation Marty. That is why I posted the link for that yoke, as would conclude the debate as to whether or not the Denny's yoke was meant for the A815, as it was clearly intended to fit 727/A833. This being the case, my issue with the yoke being too loose, along with the one...

I found this listing for a yoke that I believe fits the A518. The spline cut is way different. Is it possible that both the yokes you have are meant for the 727, but just different tolerances depending on manufacturer? Wouldn't be the first time an aftermarket piece doesn't fit correctly...