Search results for query: *

You realise that the 73 8.25 is big bolt pattern. If you already have an ABody 8.75 why are you looking at the 8.25

I may be wrong but i believe that Dart/Duster didnt have the 8.25 till 1973. Also the 8.25 is big bolt pattern. The rear could be a transplant.

I picked up a set of used SS leaf springs. Been looking through GOOGLE but cant find a Mopar performance part number for the bushings. I know that they can be bought from Jegs etc, but up here in Canada it is not uncommon for the part to be cheaper, after shipping and exchange rate, to buy at...

Are the springs used in a 1972 Duster the same used in a 1974 Dart sport. Thanks

I missed in your original post that the front disk swap has already been done.

The Dart should be a 8.25 and a straight bolt in, drive shaft length will need to be adjusted. You grab the complete axle assy as well as the shock plates. while at it grab the front disk brake assy including the control arms, prop valve and master. There is lots of information here on the...

Putting a 68 B body 8.75 in a 74 Dart sport. Have to put on new perches for correct width. Is the pinion angle the same or different from a A body to B body. If different what would it be.Thanks

The spring purches on the B body is 44" where a A body is 43, close but not going to work

did you pull the cover off to find out if you have a open or tracloc

Ok so I have this complete A Body 8 3/4 drum to drum SBP. What would be the best way to put this rear end into the 74. The car currently has a 8 1/4 BBP. Can't find a A Body 8 1/4 with a sure grip.

Had a brain fart. 8.25 is correct

Is there any parts from the 8.5 in my 74 dart that can be used on a 8.75 housing, specifically backing plates and brake hardware. I am going to have to redrill the axles for BBP.

Is my knowledge correct that a 8.25 in a 1974 dart sport would be a 27 spline.

In my 1965 Dart I am doing an engine/trans swap. the original transmission is a cable operated 904, is there any market for these besides paper weights.

From the centerline of the diff opening is the distance to the pearches the same or is one side different than the other. Thanks

I had a 72 dart 318 3 spd and changed it to a 340 4 spd, same z bar used.